Fcrg306lafb Parts

This factory screw secures panels, brackets, and other components in your cooking appliance. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and keep parts properly aligned during use.

• Fastens components to maintain proper alignment and stability
• Helps prevent vibration, rattling, and loose parts during operation
• Replace if threads are stripped, the head is damaged, or the screw is missing
• Commonly used to mount internal or exterior parts in ranges and wall ovens

• Disconnect power and allow the appliance to cool; shut off gas supply if applicable
• Use the correct driver bit to avoid stripping the screw head
• Install in the original location and do not overtighten
• If the receiving threads are damaged, repair or replace the mating part before installation

Replacement burner cap for gas cooktops and ranges. Covers the burner assembly for proper flame distribution. Needed when original is cracked or missing.

If your oven temperature is inaccurate or food cooks unevenly, the temperature probe may have failed. This sensor monitors cavity heat levels.

Replacement burner cap for gas cooktops and ranges. Covers and protects the burner assembly. Needed when original cap is cracked, broken, or missing.

Replace a cracked or corroded oval burner crown on your 10,000-BTU gas range burner. Restores even heating and reliable ignition. Verify fit with your model.

Snap-on burner cap for gas cooktops and ranges. Restores finished appearance and protects components. Replace if cracked, chipped, or missing.

Replace a damaged or warped cooktop grate that causes unstable cookware or uneven heating. This grate restores proper support over your gas burner.

Replace a cracked, broken, or missing oven door spacer that maintains proper alignment and gap between door components. Installs in door assembly.

This cast-iron cooktop grate replaces a worn or damaged burner support so pots and pans sit securely while you cook. It restores a stable surface for cookware and keeps burners properly positioned. What it does:

• Supports cookware above the burner for safe, stable cooking
• Keeps burner caps aligned for consistent flame contact
• Replaces cracked, warped, or heavily chipped grates that cause wobbling
• Helps prevent direct contact between cookware and the cooktop surface

• One replacement cooktop grate

• Allow the range to cool completely before removing or installing the grate
• Most installations are lift-out replacements—no tools required; align over the burner and set in place
• Handle with care; cast-iron grates are heavy and can chip enamel if dropped
• Follow your appliance manual and shut off gas/power to the range

Anti-tip bracket kit secures freestanding or slide-in ranges to prevent forward tipping. Includes mounting hardware for floor or wall installation.

This gas supply tube connects the pressure regulator to the safety valve on a gas range, delivering fuel to the oven burner assembly. It is a critical component in the gas delivery system that ensures proper flow between the regulator and the oven safety valve. Replace this tube if you detect a gas odor near the connection points, if the tube shows signs of corrosion or damage, or if the oven fails to ignite properly.

This ignitor/orifice assembly sits at the surface burner and provides both the ignition spark and metered gas flow for clean, reliable light-off. Replace it to restore quick starts and consistent flame quality. What it does:

• Provides the ignition spark at the burner via the electrode
• Meters gas through the fixed orifice to set proper flame size
• Wear, cracks, or blockage here can cause clicking with no flame or a burner that won't light without a match
• A damaged or restricted orifice may lead to small, uneven, or yellow flames

• Disconnect electrical power and shut off the gas supply before servicing
• Allow the cooktop to cool; handle the ceramic electrode carefully to avoid damage
• Transfer any burner-specific hardware as needed and secure the spark lead connection
• After reassembly, restore gas and check all joints for leaks with a soapy-water solution; verify proper spark and flame

Oven won't heat or takes forever to preheat? This hot surface igniter glows to ignite your gas range's bake burner, restoring consistent oven heating.

This replacement tube routes water to the ice maker or dispenser so your appliance can fill ice trays and dispense water reliably. It restores a sealed water path to prevent leaks and ensure proper filling. What it does

• Carries water from the supply or valve to the ice maker or dispenser
• Restores proper ice maker fill and water dispensing when a cracked or clogged tube is causing underfilling
• Helps stop leaks by replacing brittle, split, or deteriorated tubing
• Works with the appliance's existing fittings and clamps to maintain a sealed connection

• One replacement water tube

• Turn off the water supply and unplug the appliance before starting work
• Inspect fittings and clamps; reuse if undamaged or replace with equivalent clamps for a secure seal
• Confirm tube routing matches the original to avoid kinking or interference with moving parts

Replacement mounting screw for ovens and ranges. Secures panels, brackets, trim, and internal components. Replace missing or stripped screws to restore fit.