Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Usually ships within 4 - 14 days
I bought a replacement turbidity sensor and swapped it out. Very simple and straightforward. However there is one trick to be know. When I pulled out the bad sensor, drain water spilled from the hole and trickled into the motherboard housing! I then had to pull out the board and check it for damage. I left it in front of a box fan for 5 hours just in case. All is well. Read more
When I identified a leak coming from the Heating Coil, I saw that the Heating Element Nut on both sides were corroded and could not hold the heating element tight any more. I ordered replacement parts and the fix was very easy. As I was running the test afterwards, I discovered that there was a leak coming from under the door. I realized then that the reason the heating element nut corroded was because of a leak in the door. I ordered a new door gasket and door seal (that goes at the bottom... Read more
With the parts, ie door seal and hinge, that I ordered. After checking an on line video on steps, it went very easily. Read more
The Cabinet Seal Kit is an OEM replacement part for Frigidaire dishwashers. It is a kit that includes all the necessary rubber seals and gaskets to make sure a proper seal around the dishwasher door. The cabinet seals are designed to prevent water leakage and contain moisture and debris within the dishwasher. Causes of bad seals can include normal wear and tear over time, exposure to cleaning chemicals or detergents that degrade rubber seals, or damage due to improper installation. Symptoms of bad seals include:
This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
I watched the video provided on your site for the installation of the door seal. Once I got the part, it took me just a few seconds to remove the old and install the new part. Read more
6 - 10 x 3/8, pan plask, switch
No.10 - 16 x 3/8
10 - 16 x 3/8 , hex
This replacement part is a bushing, and it is intended for use in different types of appliances. This is a genuine replacement part made by Frigidaire. This bushing is typically found in dishwashers but is compatible with other devices as well. The bushings are an important part of many appliances as they help reduce friction inside the machine during the different washing cycles. A new bushing might be needed if the current ones are broken or damaged. It is common that different machinery needs multiple types of bushings. These small but important parts are placed around tubes or poles and are meant to assist during the rotating or sliding mechanisms. Be sure the machine is completely powered off as the area with the bushings is often hot from friction. See the owner's manual for more exact instructions before attempting to replace this part. These bushings are sold separately and are OEM replacement parts. These bushings are compatible with appliances made by Frigidaire.
Replaced the fill valve. Read more