Fep31dbw-O Parts

Bottle with brush. Color: Biscuit paint. It's point-six fluid ounces.

Razor blade scraper.

This anchor spring maintains tension on the parts it secures, keeping the associated component aligned and stable during use. Replacing a fatigued or broken spring restores a snug fit and reliable, rattle-free operation.

• Provides spring tension to anchor a bracket, lever, or panel in place
• Helps prevent looseness, vibration, and rattling from lost spring force
• Failure signs can include a loose/shifting component, misalignment, difficulty holding position, or abnormal noise
• Replace if the spring is broken, stretched, corroded, or missing

• Disconnect appliance power; if gas is present, also shut off the gas supply
• Access the spring per your model and note its routing/attachment points before removal (a quick photo helps)
• Use needle-nose pliers or a spring hook; wear gloves and eye protection—springs are under tension
• Ensure both ends are fully seated and the connected mechanism moves/tensions correctly before reassembly

This cooktop support rod props the range top open during cleaning or service, preventing accidental slams. Replace a bent or missing rod to keep the cooktop safely supported while you access surface components.

• Supports the lift-up cooktop in the open position
• Helps prevent the cooktop from dropping unexpectedly
• Provides safer access to burners, igniters, and valves for cleaning or repair
• Common signs of failure: top won't stay up, rod is bent, loose, or missing

• Disconnect power and shut off gas; allow the appliance to cool completely
• Lift and support the cooktop; note the rod's orientation and pivot points
• Disengage the old rod from its brackets and install the replacement securely
• The rod holds the cooktop open before closing

This 10-32 terminal block nut fastens wire lugs to the appliance's terminal studs. Replacing a missing, stripped, or corroded nut restores a tight, reliable connection and helps prevent heat damage or intermittent power at the connection.

• Secures wire lugs to a 10-32 terminal stud for a solid electrical connection
• Restores proper clamping force when the original nut is stripped, corroded, or missing
• Helps address loose/burned terminal connections, heat discoloration, or intermittent power at the block
• Suitable for terminal block and similar 10-32 stud applications on compatible appliances

• Disconnect power at the breaker or unplug the appliance before servicing
• Inspect the terminal block, studs, and wiring for heat damage; replace any damaged components
• Clean threads and start the nut by hand to avoid cross-threading; tighten firmly without overtightening
• If the stud turns while tightening, hold it with an appropriate tool to protect the block

This flat-head screw secures panels, brackets, or trim so they sit flush on your appliance. Replacing a worn or missing screw restores a tight fit and helps prevent vibration, rattling, or shifting components.

• Provides a countersunk, flush-mount fastener for panels, trim, brackets, or covers
• Helps maintain alignment and secure attachment during operation
• Replaces stripped, rusted, or missing hardware
• Symptoms can include loose panels or handles, rattling noises, or visible gaps/misalignment

• Disconnect power (and shut off gas, if applicable) before servicing
• Match screw length and thread to the original for proper fit
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Support the part being fastened to keep alignment while tightening

This retaining ring secures a component in its groove on a shaft or housing, keeping parts aligned and in place during operation. Replace a bent, stretched, or missing ring to restore a tight hold and reduce movement or noise.

• Secures a component by seating in a groove on a shaft or inside a bore
• Maintains correct axial position so parts don't slide off during use
• Helps reduce wobble, vibration, or rattling caused by loose assemblies
• Typical symptoms: part won't stay seated, excess play or movement, scraping/rattling noises, or a visibly deformed ring

• Disconnect power; shut off water or gas if applicable. Wear eye protection and gloves
• Note ring orientation; use appropriate snap-ring/circlip pliers or picks—avoid overstretching
• Clean the groove and seat the ring fully; secure fit
• Replace any damaged spacers, washers, or seals found during service

This black control knob replaces a worn or broken knob for an electric range or cooktop infinite switch. It restores a clean look and lets you set your surface burner heat smoothly and reliably.

• Attaches to the infinite heat switch shaft to select surface burner temperature
• Replaces cracked, stripped, loose, or missing knobs that won't turn the switch properly
• Helps settings align and stay in place during use
• Common symptoms: knob slips on the shaft, falls off, hard to turn, or is missing

• Safety first: turn off power at the breaker and allow all elements to cool before work
• Pull the old knob straight off the control shaft—do not pry against the panel
• Align the new knob with the shaft orientation and press straight on until fully seated
• After installation, rotate through settings to ensure smooth operation and correct "Off" alignment

Electromechanical oven thermostat that regulates and maintains oven temperature for more consistent cooking results. Replaces a failing thermostat to help restore correct heating and reduce temperature swings. What it does:

• Regulates oven temperature by opening/closing internal contacts to control heating cycles.
• Helps correct symptoms such as oven not heating, overheating, uneven cooking, or frequent temperature fluctuations.
• Restores manual temperature control function when the original thermostat fails.

• Disconnect electrical power (and gas supply for gas ovens) before servicing.
• Handle the sensing element and any capillary tube carefully to avoid kinks or damage.
• Verify the part number and fit for your oven before installation.

Almond. Size: 13 oz. can. Acrylic appliance paint.

Size: 10-32 inch.

This replacement terminal block cover encloses the appliance's incoming power connections. It protects the wire terminals from accidental contact and debris, restoring a safe, finished connection area when the original cover is damaged or missing. What it does:

• Covers and shields the power terminal block where the supply wires connect
• Helps prevent accidental contact with live electrical connections
• Helps keep dust and debris out of the connection area
• Common signs: missing or broken cover, cover won't stay attached, visible heat damage or discoloration on the original cover

• One terminal block cover

• Disconnect power at the breaker or unplug the appliance before servicing
• Access the terminal block per your model's service information
• Reuse existing mounting hardware; position and secure the new cover without pinching wires
• Inspect wires/terminals for heat damage or looseness and correct before reassembly

This small spring clip secures a heating element to its mounting bracket in a range or wall oven, keeping the element properly positioned for safe, consistent heating. Replaces a worn or missing retainer to stop the element from shifting or sagging. What it does:

• Retains the heating element against its mounting point or bracket
• Helps prevent element sagging, shifting, or rattling during use
• Maintains proper alignment and spacing for reliable performance

• 1 metal spring clip

• Disconnect power at the breaker and allow the appliance to cool completely
• Support the element while removing/installing the clip to avoid stressing terminals
• Match the original clip's orientation and location before reassembly
• Do not bend or overtension the heating element; replace any damaged hardware or wiring as needed

Color: Black. Instruction sheet included.

Color: Almond

This is the black control knob for the oven thermostat. It lets you turn and set the oven temperature and replaces a worn, cracked, or loose knob so you can adjust heat accurately and safely.

• Attaches to the oven thermostat shaft to select cooking temperature
• Common symptoms: knob cracked, stripped, loose, falls off, or hard to turn
• Knob spins without changing temperature due to a worn insert
• Restores a secure grip and clear temperature selection
• Black finish to match original appearance

• Disconnect power; turn off gas supply if applicable
• Pull the old knob straight off the thermostat shaft—do not pry on the control panel
• Align the flat side of the D-shaped shaft with the knob opening; press straight on until fully seated
• The pointer aligns with Off/lowest setting before use