Fex831cso Parts

Genuine Frigidaire part

Knob - White - Lc Wash Timer G1/R1

By: Frigidaire

Part Number: 131977201

Genuine Frigidaire part

Transmission Assy

5.0 (1)

By: Frigidaire

Part Number: 134735700

Do-It-Yourself Stories from Customers like You Frigidaire laundry center not agitating goes through whole wash process including spin cycle no agitation Keith Y. • Murrieta , CA • February 19, 2016

Replaced transmission. If you have a laundry center like me, you don't have alot of space. Replacing the parts want difficult. Just limited space made it harder. Also couldn't find a removal video for one of these but using a video for a frigidaire stand alone washer ouput me in the ball park and figured it out from there. Appliance parts pros had the best process too! Read more

Genuine Frigidaire part

Power Resistor

4.0 (1)

By: Frigidaire

Part Number: 134446800

Do-It-Yourself Stories from Customers like You Dryer timer would not advance in automatic dry mode worked fine in timed mode Michael S. • Bear , DE • February 05, 2016

Replaced the power resistor on the timer assembly. Solved the problem. Read more

Genuine Frigidaire part

Push Start Switch (Momentary Start Button)

4.5 (2)

By: Frigidaire

Part Number: 131628900

This push start switch is the user-operated momentary button that completes the start circuit so the appliance begins its cycle. It replaces a worn or unresponsive start button to restore reliable start control. What it does:

Acts as a momentary contact to send the start signal to the control
Commonly used when the appliance does not begin a cycle after pressing the start button
Can fail from wear, corrosion, or broken actuator, causing no response or intermittent starts
Works with the factory wiring and mounting for direct replacement

What's included:

One push start switch

Install notes:

Always disconnect power to the appliance before performing service
Handle terminals carefully; ensure secure, corrosion-free connections
Test the switch for continuity with a meter after installation and before restoring full use

Do-It-Yourself Stories from Customers like You Start button for dryer Larry M. • Protem , MO • May 14, 2019

Wednesday stopped working, leaving out of town in 3 days, just knew I would not get part in time to not come home with 4 days laundry, 2 peeps to a broken dryer but there was hope found on your site picked medium shipping they said 91 % of there stuff gets there in 2 days medium shipping it was at my door Friday and was back in order before 48 hrs was up! Three words for these guys! proud, proud, proud! Read more

Genuine Frigidaire part

Terminal Block Screw

By: Frigidaire

Part Number: 5303208586

This terminal block screw secures the power cord leads to the appliance's terminal block, helping maintain a tight, reliable electrical connection. Replace missing, stripped, or heat-damaged screws to restore proper clamping of the wire lugs.

Clamps incoming power wires to the terminal block for a secure electrical connection
Replaces stripped, corroded, or missing terminal screw
Designed to fit the original terminal block hardware locations

What's included: 1 terminal block screw Install notes:

Disconnect power at the breaker or unplug the appliance before servicing
Access the terminal block (location varies by model); note wire positions
Inspect terminal block and wire lugs; replace any heat-damaged components
Install and tighten the new screw securely without over-tightening; reinstall access cover and verify strain relief is in place before restoring power

Genuine Frigidaire part

Guide Clip

4.9 (9)

By: Frigidaire

Part Number: 5303281074

Do-It-Yourself Stories from Customers like You Nothing worked Roger D. • Lengby , MN • December 15, 2015

Replaced the fuse by the heating element Read more

Genuine Frigidaire part

End Cap

5.0 (1)

By: Frigidaire

Part Number: 131288211

White. Right hand side

Do-It-Yourself Stories from Customers like You Washer wouldn't run but as dryer did it obviously wasn't a circuit breaker E James W. • Wilmington , NC • September 29, 2014

First attempt was to replace the door latch mechanism...didn't fix it. Kept researching and the washer control knob had been hard to turn so it seemed logical that was the problem. Also, at some point the end cap had broken. As it has the main grounding point inside it and as I was taking the control panel apart anyway it made sense to replace it. Read more

Genuine Frigidaire part

Transmission Pulley

By: Frigidaire

Part Number: 131498301

Genuine Frigidaire part

Temperature Switch

By: Frigidaire

Part Number: 134410100

Genuine Frigidaire part

Insert

4.8 (5)

By: Frigidaire

Part Number: 5303212877

Vertical spring adjuster insert.

Do-It-Yourself Stories from Customers like You My washer started banging bad on the spin cycle and i would have to force the top open rearange the load and then it would work to finish after further review it was the springs David H. • Englewood , FL • April 06, 2018

Watched a few of your videos and ordered the springs and a insert, and actually got the parts right. I am not a Appliance repair guy but I am retired and I am pretty handy so I thought what the heck. I watched the videos, a lot of common sense, common tools, and plenty of time. My knuckles are busted up and a little blood, but I got it done. Was actually kind of rewarding. Works like a champ. The Videos, ARE AWESOME. Read more

Genuine Frigidaire part

Lid Lock Switch Assembly

4.9 (22)

By: Frigidaire

Part Number: 134101800

This washer switch is both the lid lock and lid switch. New mounting bracket replaces older design. Which means in some applications you may need to drill off old design mounting bracket prior to mounting the new lock. If your replacing the 4 wire switch you will need to tape off light switch leads. The light will no longer be used. Instructions included.

Do-It-Yourself Stories from Customers like You My 20 year old frigidaire stackable washer needed the lid switch replaced so it would trigger the spin cycle Maryann S. • Owosso , MI • March 13, 2014

I unplugged the power source to the appliance. I unscrewed 2 screws and unplugged the lid switch. I replaced the old switch with the new switch and screwed in the same 2 screws that held the old switch in place and plugged the new lid switch back in under the lid. that's it . I plugged in the washer and started a load of clothes. works just fine. NO HUGE REPAIR BILL. Gosh it makes me happy to do such a simple repair to my old machine and for a very reasonable part price, my washer is... Read more

Genuine Frigidaire part

Front Panel

By: Frigidaire

Part Number: 131104303

White

Genuine Frigidaire part

Knob, Start

By: Frigidaire

Part Number: 131111501

Genuine Frigidaire part

Stud - Agitator Cap

5.0 (1)

By: Frigidaire

Part Number: 131206800

Do-It-Yourself Stories from Customers like You The agitator was not working John H. • Auburn , NY • October 11, 2016

The agitator stopped functioning and there was a squeaking sound occurring in agitation mode. I found that if I cranked down on the agitator cap, screwing in as hard as I could, the agitator would work briefly, then the cap would loosen and agitator stop moving. I removed the agitator cap, along with which came the agitator stud cap and a rubber washer/seal which was jammed up into the underside of the cap. I lifted out the agitator from the drum and inspected it and the hub best I could.... Read more