Ffha2611pfea Parts

This door hinge replaces a worn or damaged refrigerator door pivot to restore proper door alignment and sealing. It helps stop sagging, uneven gaps, and doors that stick or don't close fully. What it does

• Provides a stable pivot point so the refrigerator door opens and closes smoothly.
• Restores proper door alignment to improve the magnetic seal and reduce cold air loss.
• Reduces binding, scraping, and rattling associated with worn hinge points.
• Helps correct a door that droops, drags on the cabinet, or sits unevenly.

• One replacement door hinge.

• Unplug the appliance or disconnect power before starting work.
• Support the door while removing hinge fasteners to prevent dropping or damage.
• Use basic hand tools; tighten fasteners securely but do not overtighten.
• Refer to OEM instructions for exact hinge location and torque specs.

This replacement handle restores a secure, comfortable grip so you can open and close your appliance door or drawer with confidence. Replacing a cracked or loose handle improves usability and appearance without affecting the door's alignment.

• Provides the handhold used to open and close the appliance
• Restores operation when the original handle is cracked, broken, loose, or missing
• Helps prevent damage from pulling on trim, frames, or the latch
• Refreshes the look when the old handle is scuffed or discolored

• Unplug or disconnect power before servicing
• Support the door/drawer while removing and installing the handle
• Remove interior/backside mounting screws; transfer original screws, spacers, or caps if required
• Align and tighten screws evenly; do not overtighten

Keep your fridge sealing tightly with this replacement door gasket. It restores the refrigerator door seal to help maintain proper cooling, reduce energy use, and limit moisture and frost buildup for consistent food storage. What it does:

• Seals the refrigerator door to prevent cold air leakage and maintain set temperature
• Helps reduce frost buildup and condensation inside the fresh-food compartment
• Lowers strain on the compressor caused by escaping cold air
• Commonly replaced when you notice warm spots, persistent moisture, visible gaps, or a door that won't seat properly

• Disconnect power and remove food from the door area before replacing the gasket
• Inspect the gasket mounting channel for debris or damage and clean before installing
• Avoid sharp tools that could tear the gasket during removal or installation
• After installing, allow the gasket to form and check the door seal; door may need to be closed slowly for final seating

This lower basket kit replaces a damaged lower dish rack to support plates, bowls and cookware in the dishwasher and restore proper loading and cleaning. It provides a stable, organized lower rack for everyday dishwashing. What it does

• Holds and separates dishes, bowls and cookware in the dishwasher's lower cavity for thorough washing.
• Restores proper rack alignment and stability when tines are bent or sections are damaged.
• Replaces worn or missing lower rack components that cause noisy rolling or improper drainage.
• Helps prevent dishes from contacting the spray arm or each other during wash cycles.

• One lower basket kit.

• Remove power and empty the dishwasher before replacing the rack.
• Slide out the old lower rack and set the new kit into the lower track; wheels/tines typically snap into place.
• Inspect for sharp edges or rust; replace the kit if structural corrosion is present.

This OEM-style refrigerator shelf divider keeps items separated and organized so groceries stay in place and drawers/shelves stack neatly. It replaces a cracked, warped, or missing divider to restore proper storage separation. What it does:

• Separates food and containers to prevent shifting and contact between items
• Restores intended shelf/drawer organization and usable space
• Helps keep contents from sliding when doors open or close
• Useful when the original divider is cracked, broken, or missing

• One replacement divider

• High-level replacement: remove the shelf or drawer as needed, align the divider in its mounting slots, and press into place
• Use caution handling glass shelves or sharp edges; wear gloves to protect hands
• Check fit and alignment before returning contents to avoid interference with door or drawer movement
• If mounting clips or tracks are damaged, replace those parts rather than forcing the divider

This retainer is a small mounting clip that secures interior components so they stay in place and operate reliably. It prevents parts from shifting or rattling during normal use and restores proper alignment. What it does:

• Holds trim, shelves or small appliance components securely to the cabinet or frame
• Prevents rattling, movement, or dislodging of the secured part
• Helps maintain correct alignment for smooth operation
• Common symptom: loose or wobbling trim, shelf, or component that won't stay seated

• Retainer mounting clip

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use appropriate hand tools; this part typically snaps or slides into place but may require a screwdriver or nut driver
• Inspect mating surfaces and surrounding fasteners; replace any damaged clips or broken mounting features

This upper hinge cover is a molded plastic trim piece that protects and conceals the refrigerator door hinge assembly while keeping the cabinet opening neat. It restores the finished appearance and helps prevent dirt buildup around the hinge. What it does:

• Covers and protects the upper door hinge area from dust, debris, and incidental contact
• Conceals hinge hardware for a clean, factory appearance
• Replace if cracked, broken, missing, or if the hinge area looks exposed or unsightly
• Matches OEM fit and shape to maintain proper clearance around the hinge

• High-level: installation typically requires removing or supporting the door; follow the appliance manufacturer's service instructions
• Use basic hand tools; take care not to damage surrounding trim or paint
• Always disconnect power to models with connected electronics before doing service that could affect wiring

This wire freezer basket provides a removable storage bin for organizing frozen foods and maximizing usable freezer space. It replaces a broken, missing or warped basket so items stay contained and accessible. What it does:

• Holds and organizes frozen food items to prevent clutter and make retrieval easier
• Slides or lifts out for convenient loading, unloading and cleaning
• Stops items from falling into lower compartments or vents
• Restores secure storage when original basket is cracked, bent or missing

• One wire freezer basket

• Typically installs without tools—lift into place on freezer rails or hooks;
• Handle edges carefully to avoid pinches; wear gloves if needed
• Verify fit and orientation before loading heavy items
• If freezer shelves or rails are damaged, replace them first to ensure proper basket support

This is a refrigerator door gasket that restores a tight seal to maintain proper cooling and help reduce frost and energy loss. Replacing a worn gasket improves temperature stability and keeps food fresher longer. What it does:

• Seals the refrigerator door to prevent warm air and moisture from entering the fresh-food compartment.
• Helps stop frost buildup and water pooling caused by a failing seal.
• Can reduce excessive run time from the compressor associated with air leaks.
• Common symptom: visible gaps, brittle or torn rubber, or a door that no longer seals evenly.

• One refrigerator door gasket.

• Remove stored food and shelves as needed for safe access before starting.
• Clean and dry the mounting surface thoroughly before installing the new gasket.
• Seat the gasket evenly around the door frame and check the door closing and seal.

This wiring harness routes power and signals between the appliance control and internal components, restoring reliable electrical connections for normal operation. It replaces a damaged or worn harness to help resolve intermittent power and control issues. What it does:

• Provides secure electrical connections between the control board and components
• Restores circuit continuity when a frayed or broken wire causes intermittent function
• Helps eliminate symptoms such as no power to affected components, control errors, or components that won't start
• Maintains OEM routing and connector fit for correct installation and operation

• One complete wiring harness assembly exactly as shown

• Disconnect power to the appliance before beginning work to avoid shock or damage
• Handle connectors by the housings; avoid pulling on individual wires
• Route harness following original cable paths and secure with clips; verify connector seating

This wire storage basket provides a durable place to hold food and accessories inside your appliance, restoring organized storage and easy access. It replaces a missing, bent or damaged basket to keep items contained and visible. What it does:

• Holds and organizes items in a freezer or refrigerator compartment
• Keeps loose items from shifting or falling through vents and shelves
• Restores easy access to frequently used foods or accessories
• Replaces bent, rusted or broken baskets that impede storage

• Use gloves to avoid sharp wire edges during removal and installation
• Remove shelves or drawers as needed for access before installing the basket
• Slide or snap the basket into the existing support rails or ledges; do not force

This drain tube insulation cushions and thermally protects the refrigerator's defrost drain tube to help prevent condensation and ice buildup. It keeps the drain line insulated so water flows freely to the drip pan and reduces drip/ice-related issues. What it does:

• Wraps around the defrost drain tube to limit heat transfer and condensation.
• Helps prevent drain freeze-ups that can cause water pooling or slow drainage.
• Reduces the chance of water dripping inside the cabinet or onto the floor.
• Supports reliable defrost water routing to the drain pan.

• Always unplug the appliance or disconnect power before servicing.
• Access may require removing the back or inside panel; keep track of fasteners.
• Slide the insulation over the drain tube so it fully covers the exposed section; ensure it sits flat without kinks.
• If corrosion or heavy buildup is present, clean the drain tube before installing new insulation.