Ffhb2470ppda Parts

The Hinge Assembly is an OEM replacement part for Frigidaire refrigerators. It is the mechanism that allows the refrigerator doors to open and close properly. The hinge assembly consists of metal brackets, pins, and bushings that connect each door to the fridge cabinet and facilitate smooth swinging movement. 

Causes of a bad hinge assembly can include wear from years of operation, excessive weight on door racks damaging components, or damage if the refrigerator is moved improperly.  

Symptoms of a bad hinge assembly include:

• Doors that do not close or align securely  
• Gaps that compromise the refrigerator seal 
• Noisy or rough door movement
• Doors difficult to open, especially when full or heavy

As a major moving component, hinges can degrade over time. Replace with this genuine OEM part to restore proper door function for Frigidaire refrigerators. It fits models also compatible with Electrolux, Gibson, Kelvinator, and Kenmore designs.

This slide assembly replaces a worn or damaged drawer glide to restore smooth, stable drawer movement and proper alignment. It helps drawers open and close without sticking or falling out. What it does:

• Guides and supports a refrigerator or freezer drawer for smooth sliding action
• Prevents drawers from binding, sagging, or coming off the track
• Reduces noise and uneven movement caused by a damaged glide
• Restores proper drawer alignment for secure storage

• Unplug the appliance or disconnect power before starting any repair
• Empty the drawer and remove it according to the appliance's service instructions
• Retain and reuse any factory screws or clips unless replacements are specified
• Install orientation must match the original part; test drawer movement before returning contents

The Shelf Assembly is an OEM part for Frigidaire refrigerators. It is designed to provide a sturdy and reliable surface for organizing and storing items in your refrigerator. 

A bad shelf assembly can occur due to accidental damage, wear and tear over time, or improper handling. Signs of a faulty assembly include cracks, chips, or a loose fit, which can compromise its functionality and pose a risk to stored items.

Symptoms of a bad shelf assembly include:

• Visible cracks, chips, or breaks
• Loose or unstable  

Replace your damaged or worn-out shelf assembly with this genuine OEM Frigidaire part to restore your refrigerator.  This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This small rubber bumper cushions the refrigerator/freezer door to reduce noise and prevent metal-on-metal contact. It helps doors close quietly and protects cabinet finish from repeated impacts. What it does:

• Acts as a soft stop between the door and cabinet/frame to absorb impact
• Reduces rattling and slamming for quieter operation
• Prevents wear and chipping where the door contacts the cabinet
• Restores proper door alignment when missing or worn

• One replacement bumper

• Push the bumper into the existing hole or slot on the door/frame until fully seated
• Inspect surrounding area for damage; replace mounting clips or retainers if required
• Wear gloves to protect hands from sharp edges during installation
• No special tools usually required; for detailed instructions

This air handler housing is the molded cabinet that supports and protects the blower and internal air-handling components, helping direct airflow and maintain proper alignment for reliable cooling and heating performance. What it does:

• Forms the structural enclosure for the blower/air handler assembly and related components
• Channels and directs airflow through the evaporator and into the ductwork
• Helps maintain component alignment to prevent rubbing, vibration, and airflow loss
• Can reduce air leaks and restore proper circulation when a cracked or damaged housing causes performance issues

• Intended for technicians or experienced DIYers; disconnect power before starting work
• Remove surrounding panels and note screw/clip locations to ensure correct reassembly
• Inspect adjacent parts (blower wheel, seals, mounting tabs) and replace if damaged
• Use care to avoid cracking plastic during removal and reinstallation; do not force parts into place

This user interface is the control panel assembly that accepts touch/button input and displays oven settings so you can select temperatures, modes and timers. Replaces a worn or unresponsive control panel to restore normal operation. What it does:

• Registers button presses and digital inputs to the oven/range control board
• Displays temperature, time and selected cooking modes for user feedback
• Helps stop false inputs when buttons are worn or intermittently responsive
• Can resolve issues where the oven won't respond to front-panel commands

• One user interface / control panel assembly

• Disconnect power (unplug or shut off circuit breaker) before starting repair
• Handle the display and ribbon/connectors with care to avoid damage
• May require removing the control/console trim to access mounting screws and connectors

This replacement door gasket seals the freezer compartment to help keep cold air in and warm air out, improving temperature stability and energy efficiency. It restores a tight seal for effective cooling and frost control. What it does:

• Creates an airtight seal around the freezer door to prevent cold air loss
• Helps reduce frost buildup and maintain consistent internal temperatures
• Can improve cooling performance and reduce run time from air leaks
• Common symptoms: visible gaps, torn or deformed gasket, frost buildup, or higher-than-normal appliance run time

• Remove the old gasket and clean mounting surface of dirt and old adhesive before installing
• Start at one corner, align the gasket, and press into the door channel evenly for a full seal
• Some gaskets seat better after a short warm water soak or gentle stretching—follow OEM guidance
• If magnets or mounting clips are present, confirm they are engaged.

This tube adapter connects and seals a refrigerator water line to the inlet or valve, restoring a secure water pathway for the ice maker or dispenser. Use it to stop leaks and re-establish reliable water flow. What it does

• Adapts and secures the appliance water tube to the inlet or valve, forming a leak-proof connection
• Restores proper water feed to the ice maker and/or water dispenser when the original adapter is damaged
• Helps prevent drips or steady leaks at the tube connection
• Works with standard refrigerator water tubing and compression fittings where specified

• One tube adapter

• Turn off the refrigerator power and shut off the household water supply before starting
• Remove the damaged adapter and clean tube ends; replace with this adapter using appropriate compression or push-fit method
• Tighten fittings to a snug, leak-free fit; avoid over-tightening plastic parts
• After installation, restore water and power, and check thoroughly for leaks

This anti-tip bracket secures the front of a freestanding range or oven to help prevent the appliance from tipping forward when the door is open. It provides a simple safety anchor that reduces tip-over risk and improves stability. What it does:

• Anchors the range to the floor or wall framing to resist forward tipping when the oven door is opened.
• Helps prevent appliance movement during normal use or when cookware is on the door.
• Addresses signs of a loose or shifting range: visible forward tilt, rocking at the front, or uneven gap between appliance and cabinetry.
• Works with the range's leveling and anti-tip system to maintain stable operation.

• One anti-tip bracket

• Install bracket to solid floor or wall framing per the appliance installation instructions; follow exact mounting locations and fastener types recommended by the manufacturer.
• Level the appliance and verify engagement with the bracket after sliding the range into place.
• Use appropriate fasteners for your floor/wall material.
• Disconnect power to the appliance before working in tight areas and follow all safety guidance in the owner's manual.

This beam-style crisper cover is the glass shelf that sits above the crisper drawer, providing a flat support surface and helping contain spills while keeping produce organized. It restores the shelf surface and proper crisper function. What it does:

• Replaces a broken or missing crisper cover to restore a stable shelf over the crisper drawer
• Helps contain spills and prevents items from falling into the crisper
• Supports produce and other refrigerated items above the drawer area
• Works with the refrigerator's crisper beam/track system to maintain proper clearance and operation

• One crisper cover (beam-style) as shown

• Always unplug the refrigerator or shut off power before servicing interior components
• Remove food and any items from the shelf area before installation
• Handle the glass carefully; lift straight up/out from the tracks or supports and slide the replacement into position
• If the cover uses plastic clips or rails, inspect and replace damaged hardware to ensure a secure fit

This water filter housing is the refrigerator-mounted enclosure that holds and seals the replaceable water filter cartridge, helping ensure proper water flow to the dispenser and icemaker. Fits factory filter systems and restores secure filter seating. What it does:

• Houses and secures the refrigerator water filter cartridge to maintain a sealed water path
• Directs filtered water to the dispenser and icemaker while preventing leaks when installed correctly
• Can help stop water bypass or weak flow caused by damaged or cracked housings
• Supports proper alignment for O-rings and filter locking/engagement

• One water filter housing designed for the factory filter location

• Turn off the refrigerator water supply and dispense any residual water before servicing
• Remove power to the appliance if required by your model and follow manufacturer safety guidance
• Inspect and replace associated O-rings or seals if worn; confirm proper seating to prevent leaks

This inner oven door glass replaces a cracked or cloudy panel and restores a clear view into the oven while helping maintain heat inside the cavity. Fits models that use the original OEM inner door glass panel. What it does

• Replaces damaged or broken inner oven door glass to restore visibility and containment
• Reduces heat loss by restoring the proper door seal and insulation area
• Helps prevent contact with hot oven components when installed correctly
• Useful when glass is cracked, chipped, or severely scratched and affecting appearance or function

• Requires removal of the oven door; for safe disassembly steps
• Handle with care—wear gloves and eye protection to avoid cuts from broken glass
• Inspect door clips, seals, and screws and replace any damaged hardware before reassembly

This replacement door handle restores a secure grip for opening and closing the refrigerator door, helping maintain normal use and appearance. Engineered to match the original fit and mounting points for easy swap-out. What it does

• Replaces a cracked, broken or loose refrigerator door handle to restore safe, reliable opening and closing.
• Provides the proper grip and leverage to prevent added stress on the door and hinge.
• Helps restore the appliance's finished look when the original handle is damaged or missing.
• Fits mounting bosses and screw locations to align with the factory door attachment.

• One door handle.

• Recommended: turn off power to the appliance and empty the door area before starting.
• Use proper screwdrivers; support the door while removing or installing the handle to avoid dropping or damaging the door.
• Retain and reuse any model-specific trim or mounting screws unless replacements are specified.

The Air Duct Seal is an OEM replacement part for Frigidaire refrigerators. It is a rubberized seal that creates an airtight connection between the refrigerator ductwork and internal fans/vents. This seal works to carefully direct chilled air to optimize freshness preservation in different fridge zones.

Causes of a bad air duct seal can include degradation over time from constant vibration and temperature fluctuations inside the fridge walls. 

Symptoms of a bad air duct seal include:

• audible leaks or whistling noises originating from duct areas
• inadequate air circulation causing temperature variations  
• buildup of frost or moisture near improperly sealed ducts

Replace with this genuine OEM seal to restore balanced air control for fresher stored foods. It fits refrigerator models also compatible with Electrolux, Gibson, Kelvinator, and Kenmore designs.

The Door Stop is an essential OEM replacement part for Frigidaire bottom-mount refrigerators. It functions to securely hold the refrigerator door fully open during loading and unloading of food items. 

Causes of a faulty door stop include cracking or warping due to years of resisting door closure force during access. Friction might also wear down moving lever components over time.

Symptoms of a bad door stop are:

• Refrigerator door unable to safely prop fully open  
• Door slowly closing partially while items are retrieved
• Visible wear marks or loss of lubrication where door pivots

This authentic OEM replacement is compatible for Frigidaire, Electrolux and Kenmore models.