Ffmb162lba Parts

Color: White. Only includes control panel frame and touchpad.

This electronic control board manages oven functions and the user interface so the range can run timed cycles and temperature commands reliably. Replacing a faulty board restores control and display operation for affected bake/oven features. What it does:

• Receives input from the console and sends commands to heating elements, igniters, and timers
• Controls oven temperature regulation and cycle timing based on user settings
• Can cause symptoms like a blank or unresponsive display, no heating, incorrect oven cycles, or error codes when failing
• Works as the central logic module for oven/range electronic control

• One electronic control board

• Always disconnect power at the breaker or unplug the appliance before service
• Handle the board carefully to avoid static damage; use anti-static precautions if available
• Verify wiring connections and mounting are secure; replace only with the exact part number
• Test function after installation; for any required control calibrations

This fan blade mounts to the refrigerator fan motor to move air through the appliance for proper cooling and temperature circulation. Replaces a worn or damaged blade to restore airflow and improve cooling efficiency. What it does:

• Spins on the fan motor to circulate air across the evaporator or condenser coils
• Restores proper airflow when a cracked or broken blade causes reduced cooling
• Helps stop vibration or rattling caused by bent or missing blades
• Can reduce motor strain from an imbalanced or damaged blade

• Disconnect power to the appliance before starting any repair
• Remove access panels and fan shroud to reach the blade; keep track of mounting hardware
• Replace carefully to avoid bending the blade; ensure correct orientation on the motor shaft

This temperature control thermostat regulates the refrigerator's cooling cycle to help maintain set temperatures in the fresh food compartment. Replaces a failed thermostat to restore proper compressor cycling and temperature control. What it does:

• Senses cabinet temperature and cycles the compressor on and off to maintain the selected setting.
• Stops cooling when the set temperature is reached and restarts cooling as temperatures rise.
• Commonly used when the refrigerator is running constantly, not cooling, or temperatures are inconsistent.
• Works with the control knob/capillary assembly to provide user-adjustable temperature control.

• Disconnect power to the appliance before attempting service.
• Access typically requires removing the control knob and control housing; handle the capillary tube gently to avoid kinks.
• Verify correct replacement location and routing before reassembly; test operation after restoring power.

This transformer supplies low-voltage power to the refrigerator's control circuits so electronic components receive stable power for reliable operation. Replace a failed transformer to restore power to controls and related functions. What it does

• Converts line voltage to low-voltage power used by control boards and electronic modules.
• Commonly linked to symptoms like non-working control displays, no response from dispenser or ice controls, or intermittent electronic behavior.
• Works as a direct replacement part when the original transformer fails or shows electrical faults.
• Designed to mount and wire into the appliance's control compartment per OEM configuration.

• One transformer

• Disconnect power to the appliance before starting any repair to avoid electrical shock.
• Verify wiring locations and harness orientation before removal; label connectors if needed.
• Use proper tools and follow the appliance's service manual for access and mounting instructions.

This replacement lever restores reliable manual control of the appliance component it attaches to, letting the door, dispenser or mechanism operate smoothly and predictably. Durable molded construction resists wear from normal use. What it does

• Replaces a broken, cracked or worn lever that no longer engages or pivots correctly
• Restores proper mechanical linkage so doors, latches or dispensers can open and close as intended
• Prevents slipping, binding or intermittent operation caused by damaged lever geometry
• Matches the OEM shape to fit mounting posts and pivots without modification

• One replacement lever

• Disconnect power (and water if applicable) before starting any repair
• Remove the panel or housing that covers the lever mounting area to access fasteners and clips
• Keep small screws and clips organized; lever typically secures on a post or with a retaining clip

The Door Assembly is an OEM part for Frigidaire microwaves. It is responsible for enclosing the microwave cavity and providing a secure seal when the microwave is in operation.

A bad microwave door assembly can be caused by normal wear and tear, accidental damage, or faulty components. Signs of a faulty door assembly include a loose or sagging door, difficulty in opening or closing the door, or the door not latching properly.

Symptoms of a bad microwave door assembly can include:

• The microwave door not closing or sealing properly
• Excessive heat escaping from the microwave
• The microwave not starting when the door is closed
• Visible damage to the door, such as cracks or broken hinges

Replace your damaged microwave door assembly with this genuine OEM part to restore your microwave. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This coiled tension spring restores proper tension and movement for the appliance component it supports, helping doors, lids or moving mechanisms operate smoothly and reliably after the original spring wears or breaks. What it does:

• Provides restoring tension to return and hold moving parts (doors, lids, levers) in their correct position.
• Replaces worn or broken springs that can cause sagging, failure to stay closed, or loose/rattling motion.
• Reduces squeaks or abnormal noise caused by a compromised spring.
• Restores predictable, even movement when installed in the original mounting orientation.

• Always disconnect power (and water/gas if applicable) before starting any repair.
• Use appropriate tools and wear eye protection; springs can store tension and may release suddenly.
• Note the spring's orientation and attachment points before removal so the replacement installs the same way.

This replacement handle restores a solid, comfortable grip on your appliance, so you can operate the door or drawer normally. Use it to replace a loose, cracked, or broken handle and refresh appearance and usability.

• Provides the external grip used to open and close the appliance door or drawer
• Replaces handles that are cracked, broken, stripped, or loose
• Restores a clean, finished look when the original is scuffed or discolored

• Disconnect power to the appliance before service; shut off gas if applicable
• Protect surrounding finishes; support the door to avoid strain while removing the old handle
• Transfer existing screws, end caps, or brackets to the new handle; match orientation
• Tighten fasteners evenly without overtightening; verify smooth operation after installation

This mesh grease filter captures grease and food particles from exhaust air in your over-the-range ventilation system, helping protect the blower and keep the area around your cooktop cleaner. Replace a bent or saturated filter to restore proper airflow. What it does:

• Traps grease and particulates from cooking exhaust
• Helps maintain airflow through the venting system
• Common signs of replacement: torn/warped mesh, broken tabs, heavy grease saturation, or the filter falling out

• 1 mesh grease filter

• Disconnect power before servicing and let surfaces cool
• Wear gloves; filter edges can be sharp
• Access the filter from the bottom, release the latch or tabs, slide out the old filter, and seat the new one securely in the same orientation
• Do not operate the appliance without the grease filter installed

This replacement motor restores power to the appliance's fan or blower assembly so airflow and cooling performance resume. Use it to replace a failed or noisy motor and get your appliance running normally again. What it does

• Spins the fan/blower or driven component to circulate air or operate the mechanism.
• Replaces motors that stall, hum, or do not run at all.
• Can resolve reduced airflow, warm compartments, or uneven cooling when motor failure is the cause.
• Designed to match the appliance's original motor function and mounting.

• Disconnect power to the appliance before starting any repair to avoid electrical shock.
• Verify the motor part number and physical fit against the unit before installation.
• Basic hand tools required; access may require removing panels or shelves.

This front control panel provides the user interface for your appliance, protecting switches and displaying settings while keeping controls organized and accessible. It restores a clean, functional console surface. What it does:

• Replaces damaged or worn control surface to return a tidy, usable interface
• Protects underlying switches and electronic controls from spills and debris
• Helps restore clearly visible button/label layout for easier operation
• Helps resolve issues with stuck or unreadable controls caused by panel damage

• One front control panel

• Disconnect power before attempting any repair to avoid shock or damage
• Remove screws or clips securing the old panel, then lift out and unplug any connectors
• Align and reconnect wiring harnesses, then secure the replacement panel with the original fasteners

A complete outer door assembly that replaces a damaged or dented refrigerator door to restore function and appearance. Fits as a full replacement to simplify repairs and avoid patchwork fixes. What it does:

• Replaces the exterior door panel and attached hardware so the cabinet seals and appearance are restored
• Provides the mounting surface for hinges, handles, and door-mounted components
• Helps maintain proper cold retention when door closes fully (symptom: poor sealing or visible damage)
• Restores cosmetic finish where dents, deep scratches, or crushed edges are present

• Disconnect power and empty the door before starting; have a helper for safe handling
• Installation may require hinge alignment and adjustment for proper closing
• Use included hardware; otherwise reuse existing fasteners only if in good condition
• Follow manufacturer service instructions and wear gloves to protect finish and hands

This complete outer door assembly replaces a damaged or dented refrigerator door to restore proper closure, seal performance, and the appliance's appearance. It ships ready to install so you can get the fridge working and looking right again. What it does:

• Replaces a damaged, dented, or warped outer refrigerator door to restore fit and appearance
• Re-establishes correct door alignment and sealing surface to help maintain internal temperature
• Addresses issues like visible damage, bent trim, or doors that no longer close flush
• Works with existing hinges, gaskets, and interior components when compatible

• One complete outer door assembly

• Disconnect power and remove food and door-mounted items before starting
• This heavy exterior assembly typically requires two people to move and align safely
• Transfer hinges, trim, and interior components per OEM instructions; use proper fasteners
• Check door alignment and gasket seal after installation; adjust hinge mounting if necessary