Fggh3047vf Parts

This ignitor orifice assembly replaces the gas feed and ignition interface on compatible gas ovens and ranges, restoring reliable spark and proper gas delivery for burner ignition. Use it when ignition or burner performance is inconsistent. What it does:

• Directs gas flow to the igniter/burner and provides the correct orifice opening for safe ignition
• Allows the igniter to light the burner reliably for even cooking heat
• Commonly used when burners won't light, take too long to ignite, or flame is weak/uneven
• Matches OEM mounting and gas-port alignment for straightforward replacement

• One ignitor orifice assembly

• Turn off gas supply and electrical power before beginning work
• Follow manufacturer instructions and local codes for testing for leaks after installation

Replace your range oven door hinge to restore proper door alignment and smooth operation. Fixes door sag and improves seal. Verify fit with your model.

A replacement hex-head screw used to secure appliance regulator brackets and similar small components. Restores proper fastener fit so panels and brackets stay firmly attached. What it does

• Fastens regulator bracket and related sheet-metal components
• Provides a secure threaded connection for components where an 8-18 thread is specified
• Helps eliminate looseness or rattling caused by a missing or damaged screw
• Matches the nickel/chrome finish commonly used on interior mounting locations

• One hex head screw (8-18 x 3/8), nickel finish

• Intended for use where an 8-18 x 3/8 hex screw is specified by the manufacturer
• Tighten to snug; avoid over-torquing which can strip sheet-metal threads
• Turn off power to the appliance before accessing internal components
• If the original screw used a lock washer or threadlocker, replace or reapply as appropriate

This is a metal cover that fits over the convection fan assembly in the back wall of the oven cavity. It protects the fan and heating element while allowing hot air to circulate evenly during convection cooking. Replace this cover if it is warped, cracked, or corroded, which can cause uneven heating or rattling noises during convection baking.

This is a black metal side panel that attaches to the left exterior side of the range, providing a finished appearance and structural support. It helps enclose and protect the internal components of the oven cavity. Replace this panel if it is dented, rusted, scratched, or damaged from heat exposure.

Seals gaps at the rear of your range while maintaining proper ventilation. Replace if damaged, cracked, or allowing air leaks. Confirm fit with your model.

Replacement control knob for gas range front panel. Installs on control shaft to adjust burner heat and oven temperature. Needed when original is cracked, broken, stripped, or missing.

Support plate that mounts to the bottom of your range oven cavity. Replace if the original plate is cracked, warped, or damaged from heat exposure.

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

Secures the motor assembly to the range chassis. Replace if your bracket is cracked, bent, or broken to restore proper motor alignment and stability.

Oven rack glide that allows smooth sliding of oven racks. Replace this guide if it's broken, cracked, or missing to restore proper rack operation.

Replacement drawer glide for electric and gas ranges. Guides storage drawer along its track for smooth opening and closing. Replaces cracked or worn glides.

The Bushing is an OEM part for Frigidaire cooktops. This part serves as an interface between the control knob and the appliance, ensuring smooth operation and protecting both the knob and the control panel from wear and tear. The bushing fits snugly around the valve's stem, reducing friction and providing stability as the knob is turned to adjust the heat settings of the cooktop.

Causes of a bad Bushing can include degradation from frequent use, exposure to high heat, or accidental damage during cleaning or use, which can lead to the bushing becoming loose or worn out.

Symptoms of a malfunctioning Bushing include:

• Loose-feeling knobs that wobble or are difficult to turn
• Excessive wear or visible damage to the knob or panel area
• Difficulty in achieving precise temperature control
• Unusual noise when turning the knobs

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Stainless steel front panel for the drawer beneath your range oven cavity. Replace if cracked, dented, scratched, or discolored to restore appearance.

Replace a dented or damaged control panel to restore your gas range's appearance. Direct fit for select models. Straightforward installation process.

This ignitor orifice assembly mounts at the oven burner to deliver and direct gas to the ignitor so the burner can light reliably. Designed to restore proper ignition where the orifice and ignitor meet. What it does:

• Directs gas flow to the ignitor area so the burner can light
• Supports stable ignition and consistent burner lighting
• Works with the burner/ignitor interface; not a standalone ignitor

• Turn off gas supply and electrical power before starting any service
• Basic hand tools required; follow OEM service instructions for safe removal/installation
• Inspect nearby fittings and gaskets for damage and replace if leaking
• If you smell gas or are unsure, stop.