Fghf266pf3 Parts

Encloses the water filter housing in your refrigerator's fresh food compartment. Replace this cover if cracked, loose, or missing to restore a secure fit.

Molded support housing that mounts and protects internal refrigerator components. Replace if cracked, broken, or damaged to restore secure fit and alignment.

Refrigerator won't power on or cool? A failed main control board stops the compressor and fans. Moderate difficulty, 15-30 minutes to replace.

Fix a refrigerator light that won't turn on, flickers, or has a loose bulb. This interior light socket secures the lamp and restores reliable lighting.

Refrigerator spacer maintains proper clearance and alignment between internal parts. Replace if worn, missing, or causing parts to rub or bind together.

This small bearing fits into the upper door hinge assembly of a refrigerator or freezer door, allowing the door to pivot smoothly when opened and closed. It sits between the hinge pin and the door bracket to reduce friction and wear. Replace this bearing if the door feels stiff, squeaks when opening, or doesn't close evenly.

This is a crisper drawer that slides into the lower section of the refrigerator compartment to store fruits and vegetables at optimal humidity levels. It typically features a clear or translucent body so you can see contents without opening the drawer. Replace this drawer if it is cracked, broken, or if the slides no longer allow it to open and close smoothly.

Fridge not cooling or won't turn on? This power control board manages compressor and fan operation. Moderate DIY repair restores cooling performance.

Fix no water or ice issues with this refrigerator water tube. Restores flow from inlet valve to dispenser and ice maker when the original is cracked or leaking.

Replace a cracked, broken, or missing refrigerator shelf. Restores a stable storage surface inside your fridge for organizing food and beverages securely.

Replacement cover that restores appliance appearance and protects internal components from dirt and damage. Installs in place of a worn, cracked or missing cover to keep controls and wiring safely concealed and the unit looking finished. What it does:

• Protects the control area and internal components from spills, dust, and accidental contact.
• Hides and secures wiring and mounting points to prevent snagging or tampering.
• Restores the appliance's finished look when the original cover is scratched, cracked, broken, loose, or missing.
• Helps reduce the chance of debris entering sensitive areas that can affect performance.

• One replacement cover.

• Disconnect power (unplug or shut off circuit breaker) before attempting any service.
• Basic hand tools are typically required; support the cover while removing fasteners to avoid dropped parts.
• Handle edges carefully to avoid cuts and to prevent scratching adjacent surfaces.
• Refer to the appliance's service manual or model-specific instructions for exact removal and reinstallation steps.

This #8-32 x 3/8 screw secures appliance panels, brackets, and assemblies. Replace a missing or stripped fastener to keep parts tight and aligned, reduce vibration, and restore proper fit in compatible refrigerators and freezers.

• Machine-thread fastener sized #8-32, 3/8-inch length
• Secures control housings, trims, covers, and support brackets per model design
• Replaces missing, worn, or corroded screws that cause loose or rattling parts
• Helps maintain alignment and stability after service

• Unplug the appliance; shut off water if applicable
• Match thread size to the original and start by hand to avoid cross-threading
• Use the correct driver; do not overtighten, especially into plastic
• Verify component alignment and operation after fastening

• Thread size: #8-32
• Length: 3/8 inch

This E-ring is a small retaining clip used in Frigidaire refrigerators to hold components on a grooved shaft or pin. It keeps assemblies secure and operating smoothly by preventing parts from sliding off during normal use. What it does:

• Retains parts on a grooved shaft or pin to prevent axial movement
• Helps keep mechanisms aligned and reduces wobble or separation
• Common symptoms when missing or damaged: loose or fallen-off parts, scraping/rattling noises, or poor operation of the affected assembly

• 1 E-ring

• Unplug the refrigerator before servicing; wear eye protection (spring clips can snap)
• Use needle-nose pliers or an E-clip tool to compress and seat the ring in the groove
• Verify the ring is fully seated and flush in the groove before reassembly
• Keep any spacers/washers in the original order during removal and reinstallation

This is a left-side slide rail assembly that allows the freezer drawer to glide in and out smoothly on its track. It mounts inside the refrigerator cabinet and supports the weight of the drawer and its contents. Replace this assembly if the freezer drawer sticks, wobbles, does not close properly, or if the slide rail is cracked or bent.

Ice maker leaking water or producing malformed cubes? A cracked water fill chute allows water to leak instead of filling properly. Simple snap-in repair.

Ice maker not filling or leaking water? This water tube kit connects your water supply to the ice maker assembly. DIY-friendly repair for slow ice production.