Fghn2488lf3 Parts

This genuine replacement screw restores a secure hold for panels, trim, or internal components. It replaces worn or missing fasteners so parts stay aligned and appliances operate safely. What it does:

• Fastens panels, brackets, or trim into place
• Replaces stripped, missing, or damaged screws
• Helps stop rattling, loose panels, or misaligned trim
• Fits OEM mounting locations that require the specified machine screw

• Use the correct driver to avoid stripping the head
• Hand-start the screw, then tighten to firm snug; do not over-torque
• Disconnect power to the appliance before accessing internal components
• If other fasteners are damaged, inspect and replace as needed

This Mullion harness routes electrical connections through the refrigerator door mullion so lights, sensors and control/LED assemblies communicate with the main cabinet wiring. It restores reliable power and signal routing in the door center strip. What it does:

• Carries power and signal between the door/mullion components and the main harness
• Restores non-functioning mullion lights, LEDs or control communication caused by a damaged harness
• Prevents intermittent connections from frayed or broken mullion wiring
• Used when visible wire damage or connector failure is found in the mullion area

• One (1) mullion harness as pictured

• Disconnect power to the appliance before starting work to avoid shock or injury
• Remove the mullion/door trim and any gaskets per service instructions to access the harness
• Inspect connectors and wire routing; replace any clips or retainers to prevent pinching

This replacement mounting screw fastens panels and components in compatible Frigidaire appliances to restore secure assembly and reduce rattling or loose parts. Simple fastener sized for the original factory location. What it does:

• Secures panels, brackets, or trim to keep parts aligned and stable
• Prevents vibration and noise caused by loose fittings
• Restores proper attachment after repair or disassembly
• Matches the OEM thread and length for a correct fit when specified

• Use the correct screw hole and do not force; cross-threading can damage components
• Tighten to a snug fit—do not overtighten to avoid stripping threads or cracking plastic
• Power tools can be used with care; slow speed and proper bit help prevent slippage
• Turn off power and disconnect the appliance before accessing internal parts

This membrane switch is the flexible button panel that sits under the appliance control bezel, restoring responsive push-button input and clear button labels for the control console. It's a direct-fit replacement for a worn or damaged keypad surface. What it does

• Registers user button presses and sends input to the appliance control board.
• Replaces cracked, faded, or unresponsive keypad areas that no longer activate functions.
• Helps resolve intermittent or failed button responses when the keypad is the root cause.
• Restores correct tactile feel and button alignment under the front bezel.

• Disconnect power or unplug the appliance before beginning any service.
• Remove the control bezel or console to access the membrane; handle the thin membrane carefully to avoid creases or damage.
• Align the membrane over the control board and seating posts, then reassemble the bezel; ensure any adhesive or locating tabs are correctly positioned.

This interior divider separates and organizes items on a refrigerator shelf or inside a drawer so food stays orderly and doesn't shift during normal use. It restores the original partitioning function of the compartment. What it does:

• Provides a stable partition to separate foods and containers
• Keeps items from sliding together or tipping when the door or drawer is opened
• Replaces cracked, warped or missing dividers that no longer hold position
• Restores intended organization and usable space of the shelf/drawer

• Fits into the shelf or drawer track; no tools generally required for removal or reinstallation
• Inspect surrounding clips or tracks for damage and clean area before installing
• Handle gently to avoid cracking the plastic; align tabs and press until secure

This is a replacement screw used to secure appliance panels and components. It restores proper fastening so panels, trim, or assemblies stay tight and reduce vibration or rattling. What it does

• Fastens panels, brackets, or trim to the appliance chassis
• Helps stop loose or vibrating panels and trim pieces
• Restores proper alignment where a missing or stripped screw causes gaps or movement
• Use when the original screw is missing, damaged, or corroded

• One replacement screw as shown

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the screw head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Keep removed screws in a safe place; this screw matches the original before installation

This dispenser wiring harness connects the dispenser controls and components in the refrigerator door, restoring electrical continuity for the dispenser functions and simplifying replacement of a damaged or faulty harness. What it does:

• Carries power and signals between the dispenser switches, valve/solenoid, and indicator lights
• Replaces frayed, pinched, or damaged wiring that can cause intermittent or no dispenser operation
• Addresses symptoms like non-working water/ice dispenser, no dispenser lights, or unresponsive dispenser switches
• Provides factory-style connectors for a direct, plug-and-play replacement

• One dispenser wiring harness

• Disconnect power to the appliance before beginning any work to avoid shock
• Remove the inner door panel or dispenser bezel per your model's service instructions to access the harness
• Match connectors and routing to the original harness; avoid stretching or pinching wires when reinstalling
• Test dispenser functions after installation and reassemble panels securely

This slide assembly restores smooth support and guided travel for a freezer or range storage drawer, helping the drawer open and close evenly and preventing sagging or binding. Fits the factory mounting locations and replaces a worn or damaged slide. What it does

• Guides and supports the storage/drawer so it opens and closes smoothly
• Prevents drawer sagging, sticking, or uneven movement
• Restores proper alignment and load support for safe operation
• Reduces noise from worn or bent slide components

• Disconnect power (for ranges) or remove food and drawers before servicing (for refrigerators) to avoid injury
• Remove the drawer to access mounting screws; typically requires basic hand tools
• Inspect mating brackets and fasteners; replace any damaged hardware for a secure fit
• Do not force parts; confirm correct orientation and engagement before reassembly

This shelf channel is the metal/plastic support that secures and aligns a refrigerator shelf or door bin, helping keep stored items stable and properly positioned. It restores proper shelf fit and prevents sagging or misalignment. What it does:

• Provides a secure mounting track for a refrigerator shelf or door bin
• Supports shelf weight to prevent bowing, shifting, or falling
• Keeps the shelf aligned so items sit level and doors close smoothly
• Helps restore original shelf fit after damage or wear

• One shelf channel mounting piece

• High-level replacement; inspect adjacent clips and fasteners and replace if damaged
• Use proper hand tools; avoid overtightening to prevent cracking
• Disconnect power only if working near electrical components; otherwise power removal is not typically required

This slide assembly is the replacement drawer slide that guides and supports a refrigerator/freezer drawer for smooth opening and closing. Restores proper drawer alignment and reduces binding or falling drawers. What it does:

• Replaces worn or broken drawer guide hardware so the drawer tracks smoothly.
• Helps prevent the drawer from sticking, falling forward, or becoming misaligned.
• Restores stable support for loaded drawers to improve access and operation.
• Reduces scraping, grinding, or noisy drawer movement when operating the drawer.

• One slide assembly (single drawer slide) as pictured.

• Disconnect power to the appliance or unplug before starting work.
• Remove contents and fully remove the affected drawer per your appliance's service instructions before replacing the slide.
• Support the drawer and remove any fasteners holding the old slide; install new slide in the same orientation and secure fasteners tightly.

This defrost pan collects and channels water from the refrigerator's defrost cycle to the drain, preventing leaks and water pooling beneath the appliance. Durable plastic designed to fit underneath the freezer/evaporator area. What it does:

• Catches meltwater from the evaporator during defrost cycles to prevent leakage under the cabinet
• Guides water toward the drain tube so it can evaporate safely
• Helps avoid standing water and related odors or damage
• Fits into the refrigerator base where the original drip tray is located

• One defrost pan/drip tray

• Disconnect power to the appliance before servicing to avoid shock
• Remove lower access panels or kick plate to reach the old pan; be careful of sharp edges
• Position new pan under the evaporator/drain area and drain tube alignment
• If you find excessive frost or frequent water, inspect the drain tube and defrost system for root causes