Fgi337esc Parts

Dishes not getting clean? A clogged or damaged spray arm prevents proper water distribution. This part restores spray coverage across your rack. Easy DIY fix.

Replacement sensor assembly that detects appliance operating conditions and sends readings to the control system for proper operation. Installing a working sensor restores reliable feedback and helps resolve related error codes or inconsistent performance. What it does:

• Detects operating conditions and provides electrical feedback to the appliance control.
• Enables the control board to monitor and adjust cycles based on measured readings.
• Faulty or intermittent sensors can cause incorrect readings, error codes, or unstable/incorrect appliance operation.
• Replacing a failed sensor restores accurate sensing and helps return the appliance to normal function.

• Always disconnect power to the appliance before starting work to avoid shock or injury.
• Handle the sensor and wiring gently; avoid pulling on wires or bending sensor probes sharply.
• Ensure connectors are fully seated and routed clear of moving parts or heat sources.
• After installation, restore power and verify proper operation and that any previous error codes are cleared.

This micro switch detects door or lid position and tells the appliance when the door is closed so cycles can start or safety interlocks stay engaged. It restores reliable door sensing and helps prevent operation with the door open. What it does:

• Acts as a position sensor that completes or breaks the control circuit when the door/lid is closed or opened
• Keeps the appliance from starting or continuing a cycle if the door is open (safety interlock)
• Common symptom fix: appliance won't start, stops mid-cycle, or shows door-related error codes
• Small electrical switch designed to mount at the door latch or frame and connect to the appliance wiring harness

• Disconnect power (unplug or shut off breaker) before attempting service
• Access may require removing panels, trim, or the door latch assembly; keep track of screws and fasteners
• Observe wiring orientation and connector positions; replace exactly as removed or tag wires

A small spring-style hose clamp that secures flexible tubing to fittings to help prevent leaks and hose separation. Replaces a worn or loose clamp to restore a tight seal on water and drain connections. What it does

• Compresses around a hose to hold it firmly on a barbed or smooth fitting
• Helps stop leaks and reduces chance of hose slip-off under pressure
• Commonly used on water, drain, and vent hoses where space is limited
• Simple, spring-action design keeps consistent tension as hoses expand/contract

• Disconnect power and shut off water supply before servicing appliance
• Use pliers to expand the clamp, slide into position, then release to seat it
• Inspect hose and fitting for damage; replace hose if cracked or brittle
• Do not overtighten or modify the clamp; replace with the exact style/size for a proper seal

Restores dishwasher display and controls when lights dim, buttons fail, or screen goes blank. Shows cycle settings and status indicators clearly. Verify fit with your model number before ordering.

Replacement mounting nut for dishwashers. Secures internal components in place. Order a new nut if yours is stripped, cracked, or missing.

Replace your dishwasher's outer door assembly when the panel is dented, scratched, discolored, or damaged. Restores the exterior appearance of your unit.

Replacement mounting screw for dishwasher panels and components. Secures loose panels, brackets, and trim. Needed when original fasteners are missing, stripped, or worn.

1/4"diameter - 93" long, plastic, cut-to fit

This is the upper spray arm assembly that rotates beneath the top rack of the dishwasher, distributing water to clean dishes on the upper level. It connects to the water supply through a hub in the center of the dishwasher tub. Replace this spray arm if dishes on the top rack are not getting clean, if the arm is cracked or clogged, or if it no longer spins freely.

The Tubing is an OEM part for Frigidaire dishwashers. As a key component of the spray arm assembly, the tubing works to distribute water throughout the dish rack during wash and rinse cycles. 

Causes of bad tubing can include mineral or limescale buildup reducing water pressure over time. Cracks or kinks from constant bending also jeopardize tubing integrity.

Symptoms of damaged tubing include:

• Poor or uneven spray pattern across the dish rack
• Reduced water pressure noticed during cycles  
• Leaks at tubing connections

Replacing the tubing restores the proper water flow needed for thorough cleaning. This OEM Frigidaire part replaces both the tubing segment and needed clamps/fasteners for hassle-free installation. It is also compatible with dishwasher models by Westinghouse, Crosley, and KitchenAid.

Exterior side trim strip that covers and protects dishwasher cabinet edges. Replace worn, damaged, or missing trim to restore a finished appearance.

Fix leaking connections in your dishwasher with this rubber o-ring seal. Prevents water damage at valve, hose, and fitting joints. Simple repair.

This is the display assembly board located on the dishwasher's control console. It shows cycle selections, time remaining, and status indicators so you can monitor and operate the dishwasher. Replace this assembly if the display is blank, flickering, showing incorrect information, or if buttons on the control panel are unresponsive.

Fix a dishwasher that won't start, shows error codes, or has unresponsive buttons. This electronic control board restores cycle operation and display function.

This is a control assembly that includes the user interface board and display panel for a range or oven. It processes input from the touchpad controls and displays cooking settings such as temperature, time, and mode selections. Replace this assembly if the display is blank, shows error codes, buttons are unresponsive, or the oven does not respond to input commands.