Fgid24466qf Parts

This bezel is a trim piece for Frigidaire dishwashers that finishes and protects an opening on the door/control panel, helping the mating component sit properly while restoring a clean, factory look.

• Frames and protects the panel opening for a control or latch component
• Helps keep the mating part aligned and seated correctly
• Covers raw edges and gaps to reduce wear and debris buildup
• Common symptoms: broken or missing trim, loose/wobbly bezel, cracked retaining tabs, cosmetic damage

• Disconnect power to the dishwasher before servicing
• Remove the control knob or latch handle to access the bezel
• Release the bezel's retaining tabs/clips and lift it out from the panel
• Align the new bezel and snap/secure it into place; reinstall any removed parts and test operation

The Rack Adjustment is an OEM replacement part for Frigidaire dishwashers. It consists of sliding side rails, rollers, and rack guides that allow upper and lower racks to smoothly glide into multiple positions as needed.  

Causes of failure can be worn plastic rollers binding on metal tracks over extended usage cycles. Corrosion buildup within moving guide assemblies may also restrict proper functioning over time in dishwashers.

Symptoms of a problem with the rack adjustment include:

• Racks failing to extend fully or retract correctly
• Difficulty adjusting rack levels by hand  
• Squeaking or grinding noises coming from rails
• Dishes not washing as expected due to improper rack placement

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement screen is a mesh filter used in select appliances to block debris from entering the assembly it protects. It helps maintain proper flow and reliable operation when the original screen is missing, torn, or clogged.

• Acts as a protective mesh that traps debris before it reaches critical components
• Helps maintain proper airflow or water flow, depending on the application
• Replace if the mesh is torn, warped, brittle, or heavily contaminated
• Symptoms can include restricted flow, reduced performance, or rattling/vibration near the affected area

• Disconnect power; shut off water supply if applicable before servicing
• Allow hot surfaces to cool and wear cut-resistant gloves
• Note the orientation of the original screen and install the new one the same way
• Do not overtighten fasteners or fittings during reassembly

This Shield is a protective cover used in select appliances. It helps guard nearby components and guide airflow or heat as designed, restoring proper protection when the original shield is cracked, warped, damaged, or missing.

• Acts as a barrier/deflector to protect components from heat, moisture, grease, or debris as designed for your model
• Helps maintain intended airflow, heat path, or splash control inside the appliance
• Replace if the shield is cracked, warped, burned, broken, or missing
• Symptoms can include visible damage, scorched or discolored areas near the shield, rattling/vibration, or exposed areas that were previously covered

• Disconnect power before servicing; also shut off gas
• Wear gloves—edges can be sharp on metal shields
• Reuse original screws/clips unless your model provides replacements
• Seat the shield flat and do not overtighten fasteners

This replacement door handle provides a secure grip and restores the appliance's original look and function. Designed to replace a cracked, loose or damaged handle so the door opens and closes confidently. What it does:

• Replaces a broken, cracked or worn door handle to restore safe opening and closing
• Provides a stable grip for everyday use and helps prevent cabinet or door damage
• Stops rubbing or catching that can cause noise or uneven door movement
• Matches the OEM fit and mounting points for a straightforward swap

• Disconnect power and/or water and use two people to support heavy doors
• Remove trim or screws securing the old handle; keep hardware if reuse is specified by the OEM
• Align the new handle to the factory mounting points and tighten fasteners securely but do not overtighten
• Test door operation and handle stability before returning the appliance to regular use

This replacement refrigerator water filter cartridge reduces common tastes and odors from drinking water and ice, helping restore clear flavor and improve water quality. Easy-to-replace cartridge fits into compatible filter housings. What it does

• Filters chlorine taste and odor and other common impurities to improve water flavor
• Helps keep ice clearer and fresher-tasting
• Maintains water flow through the dispenser when replaced per manufacturer guidance
• Commonly replaced when water tastes or smells off or ice has an unusual odor

• One replacement refrigerator water filter cartridge

• Replace cartridge with the refrigerator power on and dispenser valve closed per your model's instructions
• Flush several gallons of water through the dispenser after installation to remove air and loose carbon fines
• Dispose of used cartridge per local regulations for filter media

A replacement lower spray arm that restores water distribution for effective cleaning in compatible Frigidaire dishwashers. Replaces a worn or damaged rotating arm to help improve spray coverage and rinsing performance. What it does:

• Spins to direct wash water across lower rack dishes for better cleaning
• Helps reduce spots and leftover food when functioning properly
• Commonly needed if the arm is cracked, clogged, or no longer rotating
• Works with the dishwasher's lower wash cycle and water feed assembly

• Disconnect power and water supply before beginning any repair
• Remove lower rack to access and snap or screw the old arm free per your model's instructions
• Inspect the spray holes and hub for debris; clean before installing the new arm

This water sump assembly collects and channels defrost and condensation water to the refrigerator drain system, helping prevent leaks and ice buildup in the cabinet. It restores proper water flow from the evaporator to the drain. What it does

• Collects defrost/condensation runoff from the evaporator area
• Directs water to the drain to prevent pooling inside the cabinet
• Helps reduce ice buildup around the evaporator and drain area
• Restores normal defrost water flow when a cracked or clogged sump is causing leaks

• One water sump assembly

• Disconnect power to the appliance before beginning any service
• Remove food, shelves and access panels as needed to reach the sump
• Inspect surrounding seals and mounting points; replace damaged clips or gaskets

This rack adjustment assembly helps secure and guide a range or oven rack so it slides smoothly and stays aligned during use. It restores proper rack positioning to reduce tipping and binding for safer, easier access. What it does:

• Replaces a worn or broken rack guide to restore smooth sliding and stable rack positioning
• Helps prevent racks from tilting or catching when pulled out or pushed in
• Reduces rattling or misalignment caused by damaged adjustment components

• One rack adjustment assembly

• Basic hand tools are typically all that's required; disconnect power/cool appliance before starting
• Remove the rack and any trim or fasteners blocking access to the adjustment area
• Align and secure the new adjustment in the original mounting location; verify smooth rack motion before use
• If parts are corroded or mounting points are damaged, inspect adjacent components and replace as needed

Note: Contains Left Hand and Right Hand hinges.

This rack assembly is a replacement wire shelf that restores stable support for items inside your appliance. It provides a secure, even surface so dishes, pans, or food containers sit level and slide smoothly. What it does:

• Replaces a bent, rusted, or damaged wire rack to restore usable storage space
• Supports dishes and cookware so items stay stable during use and loading
• Helps prevent items from tipping or sliding when the rack is moved
• Restores proper alignment with the appliance's track or guides

• Disconnect power to the appliance or unplug before repair if applicable
• Handle edges carefully—wire racks can have sharp points or burrs
• Slide into existing rack guides or clips; confirm secure seating before use
• If extra parts are damaged or missing, replace them separately