Fgid24466qf Parts

This hose clamp secures flexible water or drain hoses to fittings to prevent leaks and keep connections tight. It's a simple replacement that restores a secure seal and helps stop drips or loose hoses. What it does:

• Holds a rubber or plastic hose firmly to a barb or nipple to prevent leaks
• Restores a tight connection when original clamp is corroded, bent, or broken
• Helps eliminate water dripping, puddling, or intermittent leaks at hose joints
• Prevents hoses from slipping off during vibration or normal appliance use

• Disconnect power and shut off water supply before starting any repair
• Tighten clamp securely with pliers or the appropriate tool; avoid over-tightening which can damage the hose
• After installation, restore water and power, then check the connection for leaks

This is a genuine replacement mounting screw used to secure components in compatible Frigidaire appliances. It restores proper fastening so panels and parts stay aligned and stable during normal operation. What it does:

• Fastens appliance components, panels, or brackets to maintain secure assembly
• Replaces worn, stripped, or missing screws that cause rattling or loose parts
• Helps eliminate vibration-related noise by restoring correct fastening
• Matches OEM fit and function for reliable, long-lasting hold

• One replacement mounting screw, as pictured

• Use the proper size driver to avoid stripping the head; tighten until snug but do not overtighten
• Match screw location and length to the original for correct fit; keep any removed hardware for reference
• Disconnect power to the appliance before working in internal areas to reduce shock risk

This is a replacement screw used to secure appliance panels and components, restoring proper fit and stopping looseness or rattling. It's a direct-fit fastener that helps maintain safe, stable operation when original hardware is missing or worn. What it does

• Secures panels, brackets, trim pieces or internal components in place
• Stops rattling or vibration caused by loose fasteners
• Helps maintain proper alignment of parts for reliable operation
• Restores missing or damaged mounting hardware

• Screw

• Disconnect power (and water if applicable) before accessing internal parts
• Use the correct screwdriver or driver bit to avoid stripping the head
• Do not overtighten; snug until secure to avoid damaging threads or parts
• Keep removed hardware organized before final assembly

This electronic control board replaces the refrigerator's main user interface control, restoring reliable temperature management and cycle sequencing. It lets the appliance receive user inputs and run timed defrost, compressor, and fan operations. What it does:

• Houses the control circuitry that manages cooling cycles, defrost timing and fan/compressor operation
• Responds to user input from the front control panel and translates commands to the appliance systems
• Can stop or reset erratic cycling, display control errors, or fix non-responsive controls when the board is faulty
• Common symptom: unresponsive control panel, incorrect temperatures, or failure to start compressor or defrost cycle

• High-level replacement only — disconnect power before accessing electrical components
• Handle the board by its edges and avoid static discharge; use an anti-static wrist strap if available
• Verify connectors are fully seated and wiring matches original locations before restoring power

This display assembly is the user-facing control panel that shows settings and status for your appliance, restoring clear indicator lights and touch/selection feedback so you can set cycles and monitor operation. What it does:

• Replaces the appliance's front display and indicator interface so controls and status lights are visible
• Restores readable cycle, temperature, and error indicators that may be blank or dim
• Helps resolve symptoms like unlit or unresponsive display, missing icons, or incorrect status readouts
• Works with the existing user interface and button mechanisms when mechanically compatible

• High-level replacement: remove the control housing or fascia to access the display assembly; follow manufacturer service instructions
• Disconnect power (unplug or shut off breaker) before starting work to avoid shock or damage
• Handle the display and ribbon/connectors carefully to avoid bending or damaging contacts

The NUT is an OEM component specifically designed for Frigidaire dishwashers. This nut plays a vital role in maintaining stability and secure positioning of internal dishwasher components. 

Symptoms of a bad nut include movement or wobbling of interior dishwasher parts, odd noises emanating from within the unit, or leaks developing around improperly positioned or tightened components.

Causes of a bad nut can include wear and tear over time, damage from excess strain on connectors and joints, or improper installation during assembly. 

Some symptoms of a bad nut include:

• Vibration or shaking of internal parts 
• Loose interior panels or assemblies
• Difficulty latching or securing the dishwasher door
• Water leaks into areas not designed for moisture

This OEM Frigidaire replacement part is compatible with Electrolux, Gibson, Kelvinator, and select Kenmore models. 

This control assembly is the appliance's main electronic console that manages cycles, settings, and user inputs for proper operation. Replacing a faulty control restores responsive controls and reliable cycle selection. What it does:

• Receives and processes user commands from the front console
• Sends signals to timers, motors, valves, and heaters to run selected cycles
• Prevents or causes erratic operation when the control fails (unresponsive buttons, no start, or incorrect cycles)
• May display error codes or no display when the control is faulty

• One control assembly

• Disconnect power to the appliance before beginning any work
• Handle electronic boards and ribbon connectors carefully to avoid static or physical damage
• Retain all mounting hardware and transfer any brackets or connectors from the old control if needed

This is a small mounting clip used to secure panels and trim on compatible Frigidaire appliances, helping keep exterior parts aligned and stable. Replaces a worn or broken clip to reduce rattling and loose panels. What it does:

• Secures trim, panels or small components to the appliance frame
• Prevents movement that can cause rattling, gaps or misaligned panels
• Replaces clips that are cracked, bent or missing, restoring proper fit
• Designed for a discreet, low-profile hold without affecting appearance

• Turn off and unplug the appliance (or shut off power) before accessing panels
• Remove surrounding trim or screws as needed to reach the clip location
• Press or snap the clip into place; use care to avoid cracking plastic parts

No.7 plastic .375

This wiring harness is an electrical connector assembly that routes power and signals between components to restore reliable appliance operation. It replaces damaged or worn wiring to help re-establish secure electrical connections. What it does:

• Connects power and control signals between internal components to enable normal appliance functions
• Replaces frayed, melted, or broken wires that can cause intermittent operation or failure to start
• Helps resolve flickering controls, loss of power to parts, or unreliable component response
• Maintains correct routing and connector fit to prevent shorts and poor connections

• One wiring harness assembly

• Disconnect all power to the appliance before starting any repairs to avoid shock or injury
• Verify connector orientation and secure all terminal connections; do not force connectors into place
• Route the harness to match factory wiring paths and use existing clips or tie points to prevent rubbing

These side strips are exterior cabinet trim pieces that restore a finished look and protect the refrigerator cabinet edges. They replace damaged, loose, or missing side trim to improve appearance and help keep edges covered. What it does:

• Covers and protects the vertical cabinet edges from chips, dings, and everyday wear
• Conceals gaps between the cabinet and the door or liner for a neater appearance
• Replaces cracked, warped, or missing trim that can make the appliance look worn
• Helps maintain a continuous exterior finish along the refrigerator sides

• Service-friendly trim; typically snaps or screws into place—inspect fasteners before removal
• Remove damaged strips carefully to avoid scratching the cabinet; use appropriate trim tools if needed
• Keep work area clear and support panels during installation to prevent drops or damage
• If working near electrical components, unplug the appliance or turn off power at the breaker

This replacement rail restores smooth sliding and support for a drawer or shelf assembly, helping the component open and close reliably. Use when a worn or damaged rail causes sticking, misalignment, or instability. What it does

• Provides a guided track for a drawer or shelf to slide in and out
• Replaces bent, cracked, or worn rail surfaces that cause sticking or catching
• Helps eliminate wobbling, uneven travel, or a drawer that falls out of the track
• Restores proper alignment so the drawer or shelf seats and locks correctly

• One replacement rail

• Disconnect power to the appliance and remove contents before servicing
• Remove the drawer or shelf to access mounting fasteners
• Use basic hand tools; keep track of clips and screws for reassembly
• Inspect the opposite rail/sides; replace matching components if worn for best performance

These are replacement countertop mounting screws that secure the appliance to the countertop or cabinet, restoring a stable, flush fit and preventing movement or gaps. Sold as a 2-pack for quick, direct replacement. What it does

• Secures the appliance countertop or trim to the cabinet or counter to keep the unit from shifting.
• Helps eliminate rocking, gaps, or uneven alignment caused by missing or loose mounting screws.
• Restores proper fit and finish where original mounting hardware has been lost or damaged.
• Works with factory mounting points and standard driver heads for straightforward replacement.

• Two countertop mounting screws.

• Use the correct-size driver to avoid stripping the screw head.
• Tighten until snug; avoid over-tightening which can strip threads or damage the cabinet/countertop.
• Keep original brackets and hardware; replace only the missing or damaged screws as needed.

This replacement leveling foot provides a stable, height-adjustable support for your appliance so it sits level and reduces rocking. It restores proper alignment for smooth door operation and even weight distribution. What it does:

• Replaces a worn or damaged support foot to stop rocking and improve stability
• Allows small height adjustments to level the appliance on uneven floors
• Helps maintain proper door closure and reduce vibration noise
• Fits under the appliance cabinet and bears operational weight

• One leveling foot

• Unplug the appliance or disconnect power before working underneath it
• Use a helper or an appliance dolly to safely raise and support the unit while replacing the foot
• Thread the foot into the mounting bracket or cabinet insert until it contacts the floor, then adjust as needed