Fgid2474qfob Parts

These side strips are exterior cabinet trim pieces that restore a finished look and protect the refrigerator cabinet edges. They replace damaged, loose, or missing side trim to improve appearance and help keep edges covered. What it does:

• Covers and protects the vertical cabinet edges from chips, dings, and everyday wear
• Conceals gaps between the cabinet and the door or liner for a neater appearance
• Replaces cracked, warped, or missing trim that can make the appliance look worn
• Helps maintain a continuous exterior finish along the refrigerator sides

• Service-friendly trim; typically snaps or screws into place—inspect fasteners before removal
• Remove damaged strips carefully to avoid scratching the cabinet; use appropriate trim tools if needed
• Keep work area clear and support panels during installation to prevent drops or damage
• If working near electrical components, unplug the appliance or turn off power at the breaker

This replacement rail restores smooth sliding and support for a drawer or shelf assembly, helping the component open and close reliably. Use when a worn or damaged rail causes sticking, misalignment, or instability. What it does

• Provides a guided track for a drawer or shelf to slide in and out
• Replaces bent, cracked, or worn rail surfaces that cause sticking or catching
• Helps eliminate wobbling, uneven travel, or a drawer that falls out of the track
• Restores proper alignment so the drawer or shelf seats and locks correctly

• One replacement rail

• Disconnect power to the appliance and remove contents before servicing
• Remove the drawer or shelf to access mounting fasteners
• Use basic hand tools; keep track of clips and screws for reassembly
• Inspect the opposite rail/sides; replace matching components if worn for best performance

This replacement leveling foot provides a stable, height-adjustable support for your appliance so it sits level and reduces rocking. It restores proper alignment for smooth door operation and even weight distribution. What it does:

• Replaces a worn or damaged support foot to stop rocking and improve stability
• Allows small height adjustments to level the appliance on uneven floors
• Helps maintain proper door closure and reduce vibration noise
• Fits under the appliance cabinet and bears operational weight

• One leveling foot

• Unplug the appliance or disconnect power before working underneath it
• Use a helper or an appliance dolly to safely raise and support the unit while replacing the foot
• Thread the foot into the mounting bracket or cabinet insert until it contacts the floor, then adjust as needed

This Overflow Hose is an OEM part for Frigidaire dishwashers. This ensures proper water drainage during the dishwasher's operation, preventing overflows and leaks.

Causes of a Bad Part: Over time, the overflow hose can degrade due to exposure to heat, chemicals, or physical damage. Blockages or kinks might also impede proper water flow.

Symptoms of a Bad Part:

• Water leaks from the dishwasher
• Inadequate drainage leading to overflows
• Visible cracks or damage on the hose

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Detergent Dispenser is an OEM part for Frigidaire dishwashers. It dispenses the necessary doses of detergent at precisely timed intervals during cycle operation. 

Causes of dispenser malfunction stem from normal wear over extended use. Mineral buildup can accumulate inside inhibiting proper dispensing action. Mechanical or electronic components controlling release functions are also susceptible to failure.

Symptoms of a bad dispenser include:

• Dishes not getting completely clean after cycles
• Residual food or film left on dishware   
• Error codes related to detergent supply issues
• Leaks or spills from the dispenser area

This OEM Frigidaire part is also compatible with some Electrolux, Gibson, and Kenmore appliance models. 

This replacement screen is a mesh filter used in select appliances to block debris from entering the assembly it protects. It helps maintain proper flow and reliable operation when the original screen is missing, torn, or clogged.

• Acts as a protective mesh that traps debris before it reaches critical components
• Helps maintain proper airflow or water flow, depending on the application
• Replace if the mesh is torn, warped, brittle, or heavily contaminated
• Symptoms can include restricted flow, reduced performance, or rattling/vibration near the affected area

• Disconnect power; shut off water supply if applicable before servicing
• Allow hot surfaces to cool and wear cut-resistant gloves
• Note the orientation of the original screen and install the new one the same way
• Do not overtighten fasteners or fittings during reassembly

This replacement refrigerator water filter cartridge reduces common tastes and odors from drinking water and ice, helping restore clear flavor and improve water quality. Easy-to-replace cartridge fits into compatible filter housings. What it does

• Filters chlorine taste and odor and other common impurities to improve water flavor
• Helps keep ice clearer and fresher-tasting
• Maintains water flow through the dispenser when replaced per manufacturer guidance
• Commonly replaced when water tastes or smells off or ice has an unusual odor

• One replacement refrigerator water filter cartridge

• Replace cartridge with the refrigerator power on and dispenser valve closed per your model's instructions
• Flush several gallons of water through the dispenser after installation to remove air and loose carbon fines
• Dispose of used cartridge per local regulations for filter media

A replacement lower spray arm that restores water distribution for effective cleaning in compatible Frigidaire dishwashers. Replaces a worn or damaged rotating arm to help improve spray coverage and rinsing performance. What it does:

• Spins to direct wash water across lower rack dishes for better cleaning
• Helps reduce spots and leftover food when functioning properly
• Commonly needed if the arm is cracked, clogged, or no longer rotating
• Works with the dishwasher's lower wash cycle and water feed assembly

• Disconnect power and water supply before beginning any repair
• Remove lower rack to access and snap or screw the old arm free per your model's instructions
• Inspect the spray holes and hub for debris; clean before installing the new arm

This water sump assembly collects and channels defrost and condensation water to the refrigerator drain system, helping prevent leaks and ice buildup in the cabinet. It restores proper water flow from the evaporator to the drain. What it does

• Collects defrost/condensation runoff from the evaporator area
• Directs water to the drain to prevent pooling inside the cabinet
• Helps reduce ice buildup around the evaporator and drain area
• Restores normal defrost water flow when a cracked or clogged sump is causing leaks

• One water sump assembly

• Disconnect power to the appliance before beginning any service
• Remove food, shelves and access panels as needed to reach the sump
• Inspect surrounding seals and mounting points; replace damaged clips or gaskets