Fgm0205kfb Parts

This magnetron generates the microwave energy used to heat food in countertop and over-the-range microwaves. Replace a failed magnetron when the oven powers on but does not heat or shows arcing or loud humming. What it does:

• Converts high-voltage power into microwave radiation that heats food.
• Common symptom: microwave runs but does not heat.
• Other symptoms: unusually loud humming, arcing or sparking inside the cavity, or a burning/ozone-like smell.
• Not a user-serviceable electrical component — faults often require component-level replacement.

• Disconnect power before servicing; unplug the appliance and verify power is removed.
• Discharge the high-voltage capacitor before touching high-voltage components to avoid serious shock.
• Handle carefully; avoid touching the magnetron antenna or ceramic surfaces.

This evaporator fan motor circulates cold air inside the refrigerator compartment to maintain even cooling and proper airflow. Replaces a failed or noisy fan motor to restore consistent temperature distribution. What it does:

• Spins the evaporator fan blade to move air across the evaporator coils and throughout the fresh-food compartment
• Helps prevent uneven cooling, warm spots, and excessive frost buildup when operating correctly
• Reduces or eliminates grinding, rattling, or humming caused by a worn or failing motor
• Works as part of the refrigerator's airflow system to support normal compressor and defrost operation

• One evaporator fan motor (single unit as shown)

• Disconnect power before servicing to avoid shock or injury
• Access typically requires removing interior panels; handle evaporator fins and wiring with care
• Verify fan blade clearance and secure electrical connectors before restoring power

A decorative trim piece that restores the finished edge and appearance of the appliance door. Replaces worn or damaged trim to improve aesthetics and help keep the door edge sealed and protected. What it does:

• Provides a finished decorative edge to the appliance door or panel
• Helps secure and align the outer door or panel for a consistent fit
• Covers gaps and hides fasteners for improved appearance
• Commonly replaced for cracked, dented, or faded trim

• One trim piece as shown

• Disconnect power to the appliance before starting any repair
• Remove door or panel fasteners as needed to access the trim; keep hardware organized
• Use gentle prying to avoid scratching adjacent surfaces; avoid forcing the trim into place

This broiler insert is the oven pan insert that sits under the broiler burner to catch drips and help direct heat for even browning. It restores a stable cooking surface and keeps the broiler area cleaner. What it does:

• Holds food and catches grease and drips during broiling to prevent mess and flare-ups
• Directs heat from the broiler for consistent browning and searing
• Replaces damaged, warped, or corroded inserts that cause uneven cooking
• Helps prevent food from falling into the burner area

• One broiler insert

• Disconnect power to the appliance and allow the oven to cool completely before servicing
• Remove oven racks and slide the old insert out; position the new insert so it seats securely in the broiler cavity
• Wear heat-resistant gloves when testing the broiler after installation and inspect for proper fit before use
• Do not modify the part; use only as designed for the oven broiler assembly

Control transformer that supplies the low-voltage power needed for the appliance's electronic control/console, restoring reliable operation when the original transformer fails or the display and controls lose power. What it does:

• Converts incoming line voltage to the low-voltage supply used by the control board and console.
• Keeps the display, touchpad/keys and control electronics powered and stable.
• Common symptoms of a failing transformer: unlit or blank display, unresponsive controls, intermittent operation, or control board power loss.
• Replace a visibly burned, cracked, or shorted transformer to prevent further electrical damage.

• Always disconnect power to the appliance before servicing to avoid electric shock.
• Take care with wiring: match original connector positions and secure all wire nuts/terminals.
• Inspect mounting hardware and insulation; replace any damaged fasteners or wires.

This replacement shield protects internal appliance components from heat, debris and accidental contact, helping maintain safe operation. It provides a direct-fit replacement designed to restore the original protection and component routing. What it does:

• Covers and shields electrical or mechanical parts from debris and accidental contact
• Helps direct airflow or heat away from sensitive components where applicable
• Restores the original barrier that prevents rubbing, chafing, or exposure of wiring and connectors
• Reduces risk of damage that can cause noise, shorts, or premature wear

• One replacement shield

• Disconnect power to the appliance before beginning any work
• Installation typically requires removal of outer panels; keep fasteners organized
• Use appropriate tools and protective gloves to avoid sharp edges
• Refer to the appliance service manual or OEM instructions for exact placement and fastening

This harness assembly routes power and signals between components for safe, reliable appliance operation. It replaces a damaged or worn wiring harness to restore electrical connections and reduce intermittent faults. What it does:

• Connects electrical components and sensors to the appliance control system
• Restores missing or intermittent power to downstream parts
• Helps prevent shorts from frayed or broken wires
• Maintains factory routing and connector fit for proper function

• Disconnect power to the appliance before attempting replacement
• Match connectors and routing to the original harness; do not force connectors
• Inspect surrounding insulation and clips; replace any damaged mounting hardware

This refrigerator door hinge lets the door pivot smoothly and maintain proper alignment for a secure, even seal. Replace a worn or damaged hinge to stop door sag, rubbing, or uneven closing and help restore normal operation. What it does:

• Provides a stable pivot point for the refrigerator door so it opens and closes correctly
• Restores proper door alignment to improve gasket sealing and cooling efficiency
• Stops symptoms like a sagging or misaligned door, noisy hinge operation, or door rubbing
• Durable metal construction designed for repeated use under normal household conditions

• One refrigerator door hinge

• Unplug the appliance or disconnect power before starting any repair
• Support the door while removing and installing the hinge to prevent injury or damage
• Keep fasteners and any small parts organized; tighten screws snugly but avoid over-torquing
• Adjust hinge and striker positions per manufacturer guidance