Fgmv176ntf Parts

This temperature sensor monitors internal fridge/freezer temperature so the control board can regulate cooling and defrost cycles for more consistent temperatures and food safety. What it does

• Measures compartment temperature and sends readings to the control board.
• Helps the refrigerator maintain set temperatures by enabling accurate cooling cycles.
• Supports proper defrost control when used in defrost/evaporator applications.
• A failing sensor can produce temperature fluctuation, poor cooling, or longer run times.

• One temperature sensor

• Disconnect power before servicing to avoid shock or compressor damage.
• Handle the sensor and connector gently; avoid pulling on wires.
• Verify location and routing match the original; secure sensor to prevent contact with moving parts.

This mounting plate secures internal components to the appliance chassis, restoring proper support and alignment for reliable operation. It's a simple replacement that helps stop rattling and keeps parts positioned correctly. What it does:

• Provides a stable mounting surface for internal parts and assemblies
• Restores correct alignment to reduce vibration and noise
• Prevents components from shifting or contacting other parts
• Supports safe, continued operation by keeping parts secured

• Disconnect power to the appliance before beginning any repair
• This is a mechanical replacement; basic hand tools are typically required
• Handle edges carefully; metal parts can be sharp
• Verify part fit and orientation against the existing piece before final fastening

This evaporator fan motor circulates cold air across the freezer evaporator and through the fridge, helping maintain even temperatures and proper cooling. Replaces a failed fan motor to restore airflow and reduce frost buildup. What it does:

• Spins the evaporator fan blade that moves cold air through the freezer and fresh-food compartments
• Restores airflow when the fan has stopped running or runs intermittently
• Helps prevent uneven cooling and excessive frost on the evaporator coil
• Can reduce unusual noise if the old motor is noisy or worn

• Disconnect power to the appliance before starting any repair
• Access typically requires removing interior freezer panels or back panels; use proper tools and keep fasteners organized
• Handle sharp sheet metal and insulated components carefully; wear gloves and eye protection

This fan blade mounts to the refrigerator fan motor to move air through the appliance for proper cooling and temperature circulation. Replaces a worn or damaged blade to restore airflow and improve cooling efficiency. What it does:

• Spins on the fan motor to circulate air across the evaporator or condenser coils
• Restores proper airflow when a cracked or broken blade causes reduced cooling
• Helps stop vibration or rattling caused by bent or missing blades
• Can reduce motor strain from an imbalanced or damaged blade

• Disconnect power to the appliance before starting any repair
• Remove access panels and fan shroud to reach the blade; keep track of mounting hardware
• Replace carefully to avoid bending the blade; ensure correct orientation on the motor shaft

This coiled tension spring restores proper tension and movement for the appliance component it supports, helping doors, lids or moving mechanisms operate smoothly and reliably after the original spring wears or breaks. What it does:

• Provides restoring tension to return and hold moving parts (doors, lids, levers) in their correct position.
• Replaces worn or broken springs that can cause sagging, failure to stay closed, or loose/rattling motion.
• Reduces squeaks or abnormal noise caused by a compromised spring.
• Restores predictable, even movement when installed in the original mounting orientation.

• Always disconnect power (and water/gas if applicable) before starting any repair.
• Use appropriate tools and wear eye protection; springs can store tension and may release suddenly.
• Note the spring's orientation and attachment points before removal so the replacement installs the same way.

This mesh grease filter captures grease and food particles from exhaust air in your over-the-range ventilation system, helping protect the blower and keep the area around your cooktop cleaner. Replace a bent or saturated filter to restore proper airflow. What it does:

• Traps grease and particulates from cooking exhaust
• Helps maintain airflow through the venting system
• Common signs of replacement: torn/warped mesh, broken tabs, heavy grease saturation, or the filter falling out

• 1 mesh grease filter

• Disconnect power before servicing and let surfaces cool
• Wear gloves; filter edges can be sharp
• Access the filter from the bottom, release the latch or tabs, slide out the old filter, and seat the new one securely in the same orientation
• Do not operate the appliance without the grease filter installed

This fan blade circulates cold air across the evaporator to help maintain even refrigerator/freezer temperatures and efficient cooling. Replacing a damaged or warped blade restores proper airflow and reduces unusual noise. What it does:

• Moves air across the evaporator coil so the appliance can cool evenly
• Helps prevent hot spots and frost buildup caused by poor airflow
• Can cause loud noise, reduced cooling, or a warm compartment when worn or broken
• Works with the evaporator/fan motor assembly to keep temperatures stable

• One fan blade

• Disconnect power before accessing evaporator compartment or fan assembly
• Handle blade carefully to avoid bending the fins; a bent blade causes vibration and noise
• May require removing evaporator cover or fan shroud; keep track of any screws or clips
• If motor is noisy or blade clearance is tight, inspect/replace motor or mounting hardware as needed

This replacement door handle restores a solid grip and smooth opening for a refrigerator door. It replaces a cracked, broken, or loose handle so you can open the door confidently and protect the door edge from further damage. What it does:

• Provides a secure grip to open and close the refrigerator door
• Replaces handles that are cracked, split, loose, or missing
• Helps protect the door surface and finish from wear at the pull point
• Matches the original mounting points for a direct swap on compatible units

• High-level, user-installable: remove the old handle hardware, align the new handle, and fasten with the original screws or hardware
• Use the correct screws and torque to avoid stripping or cracking the handle
• Always unplug or power off the appliance or follow manufacturer safety instructions if required for your model

This replacement pin is a small metal mounting shaft used to secure moving or stationary appliance components, restoring proper alignment and function. It's a simple, direct-fit replacement when a worn or broken pin prevents normal operation. What it does:

• Acts as a pivot or fastener to hold panels, levers, or hinges in place
• Restores correct alignment and prevents wobble or misrouting of parts
• Commonly replaced when pin is bent, worn, or sheared
• Helps re-establish smooth movement of the connected component

• Basic hand tools may be required; access panels or trim may need removal
• Inspect mating parts (bushings, clips, brackets) and replace if worn
• Disconnect power before servicing appliances with electrical components

This replacement cover is a molded protective housing that shields internal appliance components from dirt and accidental contact, helping keep parts secure and maintain safe operation. What it does:

• Protects internal wiring, connectors, or small components from dust and debris
• Helps prevent accidental contact with components while servicing or using the appliance
• Keeps parts held in place to reduce rattles or movement
• Restores missing or cracked covers that expose internal areas

• Disconnect power to the appliance before beginning any work
• Typically installed with a few screws or clips after removing the access panel
• Handle gently to avoid snapping mounting tabs; replace any damaged fasteners

This electronic control panel replaces the front user interface for your range or oven, restoring button control and display feedback so you can set temperatures, timers, and cooking modes reliably. What it does:

• Replaces the touchpad/display assembly that sends settings to the oven control board
• Restores response to keypad presses and menu navigation when the old panel is unresponsive or intermittently working
• Replaces a panel with cracked glass, stuck buttons, or display/indicator problems
• Helps regain normal control of bake, broil, timer and clock functions when the interface is faulty

• Always disconnect power to the appliance before beginning service
• Handle the glass and ribbon cable carefully to avoid damage
• Verify this part number matches the one on your appliance before ordering

This outer refrigerator door replaces a damaged or bent cabinet door to restore proper sealing and appearance. It provides the structural shell and mounting surfaces needed for hinges, trim and gasket to attach securely. What it does:

• Replaces dented, cracked or rusted outer door panels that prevent proper closing and insulation
• Restores hinge and latch mounting points so the door aligns and seals correctly
• Helps stop cold air loss related to damaged door structure or warped panels
• Provides the exterior surface that accepts trim, handles and door seals

• Disconnect power and empty the door of shelves/contents before removing
• Doors are heavy and awkward—use two people to avoid injury or damage
• Support the door while removing hinge fasteners and take care with attached wiring or trim
• Inspect and reuse or replace hinges, gaskets, handles and mounting hardware as needed