Fgp337kwo Parts

This is a replacement screw used to secure panels, trim, or small components on compatible Whirlpool appliances. Installing the correct fastener restores proper fit and helps stop rattles or loose trim. What it does:

• Secures trim, panels, or control components to prevent movement and rattling
• Replaces missing or damaged hardware that can cause gaps or loose parts
• Helps maintain proper alignment of panels and movement-free operation
• Used wherever a factory screw of this size and head style is specified

• Always disconnect power (and water, if applicable) before servicing the appliance
• Use the correct screwdriver or driver bit to avoid stripping the head
• Install by hand until threads engage, then tighten snugly—do not overtighten
• Keep removed hardware organized before final reassembly

This is a standard replacement thermostat knob for ranges and ovens that restores manual temperature control and provides a secure, easy-grip interface. It replaces a cracked, faded, or missing knob so you can set heat levels reliably. What it does:

• Fits over the oven/range temperature control shaft to allow user adjustment of heat settings.
• Replaces knobs that are cracked, stripped, loose, or missing and won't turn properly.
• Restores a positive tactile grip for accurate setting selection.
• Matches original control ergonomics for intuitive operation.

• One thermostat knob

• Disconnect power to the appliance before servicing to avoid electrical or burn hazards.
• Most installations are push-on: pull the old knob straight off the control shaft and push the new knob on until seated.
• If the knob is retained by a set screw or adapter, retain or reinstall the screw/adapter as originally configured.
• Do not force the knob; verify correct shaft orientation and fit before applying pressure.

Color: Black. Includes two double grates.

The Oven Liner Touch Up Paint is an OEM part for Whirlpool ovens. This 2 oz warm white touch-up paint is designed to cover minor scratches, chips, and blemishes on the oven liner, restoring its appearance and protecting it from further damage. 

Causes of a bad oven liner include exposure to high temperatures, accidental impacts, and abrasive cleaning materials, which can lead to scratches, chips, and discoloration. Over time, these imperfections can worsen, making it necessary to use touch-up paint to maintain the oven liner’s integrity.

Symptoms of a bad oven liner include:

• Visible scratches or chips on the oven interior
• Discoloration or fading of the liner
• Increased difficulty in cleaning the oven liner
• Potential rust or corrosion in affected areas

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement screw secures appliance panels, brackets, and components. Using the specified #10-16 x 1/2-inch fastener restores a tight, rattle-free fit and helps prevent vibration, misalignment, and premature wear when a screw is missing, stripped, or damaged.

• Provides a secure mechanical connection at designated mounting points
• Replaces missing, rusty, or stripped screws
• Helps eliminate loose panels, gaps, and rattles
• Maintains alignment of covers, trim, and brackets

• Disconnect power and shut off gas/water before servicing
• Support the part being fastened to avoid misalignment
• Start threads by hand to prevent cross-threading; tighten snugly—do not overtighten
• Reinstall only in locations specified for this size screw

Note: This part is one screw, order quantity needed.

Small rubber bumper that cushions appliance components to reduce noise, prevent metal-on-metal contact, and protect finishes; replaces worn or missing bumpers to restore quiet operation and prevent damage. What it does:

• Absorbs shock and vibration to stop rattling or buzzing
• Prevents doors, drawers or panels from banging or scraping
• Protects painted and metal surfaces from wear and chipping
• Helps restore proper spacing and alignment of moving parts

• Always disconnect power to the appliance before servicing
• Typically installs by pressing into a mating hole or seating on a flat surface; some applications use adhesive
• Inspect mating surface for damage or debris and replace any additional worn bumpers for even contact

The Clip is an OEM component specifically designed for Whirlpool ranges. This clip plays a role in securely holding and mounting components within the appliance. 

The clip is designed to securely grip parts in place, preventing unwanted movement or dislodging that could impact the operation or result in damage. It allows for components to be effortlessly installed while remaining firmly affixed. 

Causes of a bad clip can include wear and tear over time, damage due to excessive force or impact, or deterioration from heat exposure. 

Symptoms of a bad clip include: 

• Loose or detached components inside the appliance 
• Increased vibration or unwanted noise during operation
• Components that are not sitting securely or properly installed
• Difficulty accessing or removing parts that rely on the clip 

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This clip secures the oven's bottom panel to the range chassis so the floor of the oven stays properly seated during cooking and cleaning. Replacing a missing or bent clip stops rattles and keeps the panel locked in place. What it does:

• Holds the oven bottom panel securely in position
• Helps prevent the panel from lifting, shifting, or rattling
• Restores proper fit after cleaning or service
• Replace if the clip is missing, bent, or broken

• 1 clip

• Disconnect power and allow the oven to cool completely; shut off gas supply for gas models
• Remove oven racks and the bottom panel per your model's instructions
• Install the clip at the designated mounting point and ensure the panel edge seats under the clip
• Wear cut-resistant gloves; sheet-metal edges can be sharp

The thermostat bulb clip is an OEM component specifically designed for Whirlpool drop-in electric ranges, securely fastening the thermostat sensor bulb. This clip features corrosion-resistant spring coils and precision tips.  

Symptoms of a bad thermostat bulb clip include:  

• Dangling thermostat bulb
• Temperatures inside oven might be incorrect because sensor bulb is not mounted correctly.

Causes of failure involve metal fatigue weakening the thermostat bulb clip over years of expansion and contraction during heating, worn surfaces losing grip, or damaged barbs failing to anchor the thermostat bulb.

Replace yours today with this genuine OEM Whirlpool clip. Compatible with Jenn-Air, GE, and select Kenmore appliances, reinforced coils maintain constant tension assuring safety. Reliable glass retention enhances interior illumination for tasks.

This broiler pan finish is the replacement inner tray that restores the cooking surface and drip collection for oven broiling. It provides a durable surface for even browning and helps contain juices for easier cleanup. What it does:

• Replaces a worn, warped, or damaged broiler tray surface to improve broiling performance
• Collects drippings and prevents them from falling onto the oven bottom
• Helps food brown and sear more evenly by providing a stable cooking surface
• Reduces smoke from burned-on residue when the surface is restored

• Install by seating the finish tray into the broiler pan assembly per your oven's service manual
• Ensure the oven is completely cool and disconnected from power before servicing
• Handle edges carefully; use gloves if metal edges are sharp

This broiler pan is the oven tray that catches drips and holds food while broiling, helping promote even browning and easier cleanup. It replaces a worn or damaged pan so your oven broiler works as intended. What it does:

• Catches grease and drippings during broiling to protect the oven cavity
• Supports food close to the broiler element for direct, high-heat cooking
• Helps maintain even browning and searing when broiling
• Replaces warped, cracked, or heavily corroded pans that can cause uneven cooking or excess smoke

• For safety, disconnect power to electric ovens or shut off gas supply before beginning.
• Remove oven racks to access broiler area; slide the pan into the broiler slot until it seats securely.
• Inspect surrounding oven surfaces and broiler element for damage while installing.
• Clean by hand with warm, soapy water; avoid abrasive cleaners that can damage the finish.

This black standard burner cap sits atop a gas burner to shape the flame and shield the burner head from spills. Replacing a worn or missing cap helps restore smooth ignition and consistent, even heating.

• Covers the burner head to properly shape and distribute the flame
• Helps protect the burner from spills, drafts, and soot buildup
• Supports reliable ignition when correctly centered on the burner
• Common symptoms: uneven or yellow flame, delayed ignition or continuous clicking, blackened cookware, visible chips/warping on the cap

• Disconnect power and shut off gas; allow the cooktop and grates to cool completely
• Lift off the old cap and clean the burner head; ensure ports and orifice are clear
• Place the new cap on the correct burner position; it should sit level and not rock
• Light the burner and check flame shape; realign the cap if the flame is uneven

Color: White. Size: 13 oz. Spray paint primer. can.

Left hand side. For right hand use 98004953

This 18-inch supply power cord delivers a reliable electrical connection to restore appliance power and safe operation. It replaces a damaged or missing cord so the unit can receive power from the wall outlet. What it does:

• Provides the main AC connection between the appliance and household power
• Replaces frayed, melted, or broken cords that cause intermittent power or no power
• Restores secure plug and strain-relief connection to reduce arcing and overheating risks
• Matches factory-style terminal ends for a direct fit when compatible

• One 18-inch supply power cord

• Disconnect power at the breaker or unplug the appliance before starting
• Inspect terminals and cord routing; secure with the factory strain relief
• Tighten terminal connections firmly but do not overtighten; confirm proper insulation