Flce7522aw4 Parts

The Agitator Cap is an OEM part for Frigidaire washing machines. It fits securely atop the central agitator shaft located inside the washing machine tub. During the wash cycle, the agitator cap rotates along with the agitator to help agitate clothes and ensure water is properly distributed.

Causes of a bad agitator cap can include wear and tear over time, exposure to excessive loads or loads containing sharp or abrasive items that cause damage.

Symptoms of a bad agitator cap include:

• Water not properly dispersing during wash cycles
• Agitator not rotating or moving as it should
• Excessive rubbing or grinding noises coming from the agitator area
• Damaged or missing pieces on the cap

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.

• Fastens the drum baffle/lifter (vane) to the rotating drum
• Helps maintain proper tumble and load turnover
• Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
• Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes

• Disconnect power before servicing; shut off gas
• Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
• Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
• Start all screws before final tightening to seat the baffle evenly

Connects your washer tub to household plumbing to drain water after each cycle. Replace if cracked, kinked, leaking, or too short for your installation.

White door handle for laundry center dryer door. Replaces cracked, loose, or missing handles. Restores secure grip for opening and closing the door.

Secures the dryer motor in proper position for stable operation. Replace if motor shifts, buzzes, or clamp strips out. Confirm fit with your model number.

This sensor monitors appliance conditions and relays a signal to the control so heating, cooling, or cycle functions occur at the right time. Replacing a failing sensor restores accurate feedback and more reliable operation.

• Detects operating conditions and sends signals to the control board
• Helps regulate heating/cooling output or cycle timing
• Common symptoms of a failed sensor: erratic operation, incorrect readings, cycles that won't start/finish, or related error codes
• Restores proper control feedback when the original is damaged or out of range

• Disconnect power to the appliance before servicing
• Access the sensor per your service manual; note wire colors/orientation and connector locks before removal
• Transfer any mounting clips or brackets from the original if required
• After installation, run diagnostics or verify resistance/continuity per the tech sheet to confirm proper operation

Washer not filling with water or won't stop filling? This water inlet valve controls water flow into your washer. Moderate DIY repair for most models.

Fix a washer that won't spin or agitate with this laundry center drive belt. Connects motor to drum for spinning and washing. Moderate DIY repair.

The Control Board is an OEM part for Frigidaire electric dryers. It is the central processing unit that monitors and regulates all dryer functions including temperature, cycles, timers, and control panel interfaces. 

Symptoms of a bad control board include:

• Failure to initiate or maintain proper heat levels 
• Inoperable buttons and cycles or unexpected resetting 
• Error codes indicating motherboard or sensor malfunctions

Causes of a bad control board can include moisture damage disrupting circuitry, power surges burning out components, or physical impact rendering it non-functional.

This OEM Frigidaire replacement control board is also compatible with some Electrolux, Gibson, and Kenmore dryer models.

The Suspension is an OEM part for Frigidaire top-loading agitator washing machines. It refers to springs and vibration-dampening mounts underneath the wash tub. 

These components absorb mechanical stresses from unbalanced loads and support the heavy rotating assembly without added noise transfer to adjacent surfaces. Keeping tub components properly isolated is important for structural integrity over many years.

Symptoms of a worn suspension include: 

• Visible movement and shaking of the entire machine on top of the unit  
• Screeching or screeching noises when agitating heavy loads
• Fastener screws backing out or washing tub no longer level

Replacing with Frigidaire OEM suspension parts renews shock absorption to maintain steady cycles and protect connected plumbing. This is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore top load models.
 

Adjustable leveling leg that mounts underneath your laundry center to balance and stabilize the unit. Replace if cracked, bent, or missing threads.

This air duct seal creates a tight barrier between the dryer's lint housing and cabinet. Replacing a worn seal helps prevent air leaks, maintain proper airflow through the lint filter, and restore consistent drying performance.

• Seals the air duct/lint housing to the front panel to direct airflow through the lint screen and drum
• Helps maintain dryer efficiency and temperature control by preventing bypass air leaks
• Common symptoms of a failed seal include longer dry times, weak exhaust airflow, excess lint inside the cabinet, or lint around the door opening
• Replaces a deteriorated or missing seal to restore the intended air path

• Disconnect power; shut off gas supply for gas models
• Access the air duct by removing the lint screen and top/front panels as needed
• Remove the old seal and any residue; clean mating surfaces before installing the new seal
• Seat the duct evenly against the panel when reassembling to ensure a uniform seal

Pulley assembly powers tub rotation during wash cycles. Replace if worn from use, damaged by broken belts, or rusted from water exposure. Confirm fit.

Keep your dryer tumbling smoothly by restoring proper belt tension. This idler spring attaches to the idler arm and maintains tension on the drive belt so the drum turns reliably without slipping or squealing. What it does:

• Applies constant tension to the idler pulley to keep the drive belt tight around the drum and motor
• Helps resolve a drum that won't turn or tumbles intermittently
• Addresses belt issues such as slipping off, appearing loose, or premature breakage from low tension
• Can reduce squealing/chirping from the idler area caused by belt slip

• 1 idler spring

• Disconnect power; for gas dryers, also shut off the gas supply
• Access the idler assembly by removing the front or lower access panel per your model
• Relieve belt tension, unhook the old spring from the idler arm/frame, and install the new spring in the same orientation and holes
• Rotate the drum by hand to check smooth operation before reassembly

If your washer won't agitate or spin properly, the transmission may have failed. This mechanical component engages the drum during wash and spin cycles.

Replacement mounting screw that fastens panels and components in laundry centers. Needed when original is missing, stripped, or damaged to restore secure fit.