Flcg7522aw4 Parts

The Start Capacitor is an OEM part for Frigidaire combination washer/dryer laundry centers. It refers to an electronic component located within the motor control circuit board. 

This capacitor helps initiate drum movement by providing a boost of electrical current to the drive motor during appliance activation or changes in rinse/spin speed. Smooth start-ups and shifts in agitation depend on proper current delivery.

Causes of a bad start capacitor can be cracking of the outer casing from extended duty cycles or voltage fluctuations degrading dielectric plates inside over many years.

Symptoms include:

• Struggling motor that strains excessively to turn the drum
• Cycles failing to advance after starting or resume spinning  
• Unsteady or intermittent pulsing agitation noises

Replacing with a Frigidaire OEM capacitor ensures dependable motor torque for each phase of the cycle. Compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
 

Unresponsive control panel or display? This user interface wiring harness connects your display to the control board, restoring communication.

This clip is a small plastic retainer designed to secure trim and lightweight panels so they stay in place and reduce rattling or gaps. It restores proper fit and helps keep parts aligned for a finished look. What it does:

• Secures trim pieces, panels, or grill components to the appliance frame
• Prevents loose or rattling parts that can cause noise or misalignment
• Holds components in correct position so doors and panels close properly
• Replaces worn or broken clips that no longer grip reliably

• Remove power or disconnect the appliance before servicing when applicable
• Clip installs by snapping into pre-existing mounting hole or slot; no special tools usually required
• Inspect mating surfaces and replace any additional damaged fasteners for best fit

The Nut is an OEM part for Frigidaire washers. It secures the washer's motor in place, ensuring stability and proper functioning during operation.

A bad nut can be caused by wear and tear, damage, or improper installation. Signs of a faulty nut include the motor becoming loose, excessive vibration during operation, or unusual noises coming from the washer.

Symptoms of a bad lock nut include:

• The motor becoming loose or shifting position 
• Excessive vibration or shaking of the washer
• Unusual noises coming from the washer

Replace your worn-out or damaged nut with this genuine OEM part to restore your washer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Fix unresponsive buttons or a cracked display with this laundry center control panel. Restores user interface functionality. Moderate DIY repair.

Secures wiring and hoses to your laundry center frame. Replace if cracked, broken, or missing to keep wire bundles organized and protected from wear.

Phillips pan head screw for securing panels and components in appliances. Replace missing, stripped, or corroded screws during repairs or maintenance.

Pan head mounting screw for dryers. Secures internal components and panels. Replace if stripped, missing, or damaged during appliance maintenance.

This is a replacement screw used to secure appliance panels and components. It provides a direct-fit fastener to restore secure mounting and proper alignment of parts after repair. What it does:

• Secures panels, brackets, trim, or small components to the appliance frame
• Restores proper alignment and prevents rattling or loose parts
• Helps maintain safe, stable operation when used in the intended mounting location
• Works as a direct replacement for the original fastener when the correct PN is specified

• Use the matching screw hole and thread engagement; do not force or cross-thread
• Tighten to snug fit—avoid over-tightening which can strip threads or crack plastic
• If replacing multiple fasteners, use identical part numbers for consistent fit
• Disconnect power and follow appliance safety guidelines before accessing internal parts

This outer trim cover replaces a worn or damaged cosmetic panel to restore a clean appearance and protect underlying components from dirt and debris. It's a simple, direct replacement that keeps the appliance looking and functioning as intended. What it does:

• Covers and protects internal components and wiring from dust and spills
• Restores the appliance's finished appearance after damage or wear
• Helps maintain proper airflow/clearance around controls or openings
• Prevents accidental contact with underlying fasteners or edges

• One outer trim cover

• Disconnect power to the appliance before attempting any service
• Installation typically requires removal of adjacent trim or fasteners; retain all screws
• Handle cover edges carefully to avoid scratches; use soft cloth if needed
• If any clips or fasteners are damaged, replace them to ensure secure fit

Mounting screw secures panels, trim, or brackets in dryers, washers, and ranges. Replace lost, stripped, or corroded screws to restore stability.

Replacement mounting bracket that secures washer panels and components. Needed when original bracket is cracked, broken, or missing, causing loose or misaligned parts.

Replacement mounting collar secures and aligns dryer components for proper fit. Replace when worn or damaged to restore original spacing and support.

Flat metal washer that distributes load from nuts or bolts in your laundry center assembly. Replace if worn, missing, or damaged to maintain proper fastener seating and prevent loosening over time.

The  Bracket assembly is an OEM replacement part for Frigidaire washing machines. This bracket assembly contains an arm that detects any out of balance vibrations in the washing tub during the spin cycle. If excess vibrations are sensed, the arm will trip an internal switch to stop the cycle and prevent potential damage.

Symptoms of a bad bracket include: 

• Inability to complete high-speed spin cycles
• Premature ending of the spin portion of cycles  
• Error codes related to tub imbalance
• Excessive shaking felt in the washer cabinet or surrounding floor area

Causes of failure can be worn or loose mounting points that reduce the arm's sensitivity over time. Constant back-and-forth movement also causes fatigue that impairs the bracket's balance detection capabilities.

This OEM part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Top-loading washer lid for laundry center units. Replace if cracked, bent, or no longer closes securely. Installs with hinge screws at the rear.