Fmotea402wrko Parts

Replace your microwave's interior lamp assembly to restore clear visibility of food and cooking progress. Essential when bulb fails or light flickers.

Fix a microwave door that won't close or stay shut with this door latch. Secures the door in the closed position for safe operation and proper cycling.

The Mounting Kit is an OEM part for Frigidaire microwaves. It provides the necessary hardware to mount a built-in microwave securely above a cooktop or range. The mounting kit contains mounting brackets, and screws to facilitate a safe and sturdy installation. This kit does not include the installation instructions.

Causes of a bad mounting kit can include deterioration of mounting brackets or screws over time and repeated use, or if the original kit was missing components needed for a secure installation.

Symptoms of a bad or missing mounting kit include:

• The microwave become loose or detached from the wall
• Screws fall out or strips during installation
• Brackets bend or break over time
• Microwave is not level after installation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

White door handle for opening and closing the microwave door. Durable plastic construction. Replace if handle is cracked, loose, or broken off.

The fuse is a protective link in the appliance's power circuit. When excessive current or a short is detected, it opens the circuit to help safeguard wiring and electronics. A blown fuse often leaves the unit completely unresponsive.

• Interrupts power during an overcurrent or short to prevent further damage
• Helps protect control boards, motors, and wiring
• Typical symptoms: no power, blank display/controls, won't start
• Tests open (no continuity) when blown

• Disconnect power at the breaker or unplug before servicing
• Replace only with the same type and rating specified by the manufacturer
• If a new fuse blows again, locate and correct the underlying short or failed component before further use
• For microwave repairs, high-voltage capacitors can retain a dangerous charge.

This is a small microswitch used in the microwave's door interlock system or control mechanism. It detects whether the door is properly closed and signals the unit to allow or prevent operation for safety. Replace this switch if the microwave does not start when the door is closed, runs with the door open, blows a fuse repeatedly, or fails to respond when buttons are pressed.

This high voltage capacitor works with the diode and magnetron to generate the microwave energy needed to heat food. It stores and releases electrical energy to nearly double the voltage output from the transformer. Replace this capacitor if the microwave runs but does not heat, makes a loud buzzing noise, or if the unit trips a breaker - always discharge the capacitor before handling as it can retain a dangerous charge even when unplugged.

The Lamp is an original and genuine OEM replacement part for Frigidaire microwaves. It is located inside the microwave and provides light to easily see food and monitor cooking progress.

Causes of a bad lamp can be natural bulb burnout over time, damage from foods accidentally jostling the lamp during cooking, or general wear and tear.

Symptoms of a bad lamp include:

• Dimming or flickering light inside the microwave when in use
• No light turning on when the microwave is powered on
• Broken or cracked bulb housing

This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Replacement door handle for microwaves. Attaches to the front of the door for opening and closing. Replace if cracked, broken, loose, or missing.

The Thermostat is an OEM part for Frigidaire microwaves. The thermostat accurately monitors interior temperature levels during operation.

Symptoms of a faulty thermostat include:

• Inconsistent or uneven cooking results from inaccurate sensing  
• Continuous running even after the set time elapses
• Error lights or temperature faults displayed 

Failure usually occurs due to a gradual loss of calibration from years of thermal cycling stress or corrosion buildup damaging electrical components. Replacement is needed to restore precise temperature regulation.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore microwave models. 

This thermostat monitors the internal temperature of the microwave and helps regulate heating to prevent the appliance from overheating. It acts as a safety device that cuts power to certain components if temperatures exceed safe limits. Replace this thermostat if the microwave shuts off unexpectedly during use, fails to heat properly, or if diagnostic testing shows the thermostat is no longer opening or closing at the correct temperature.

Stamped metal mounting bracket that secures internal components to the microwave frame. Replace if cracked, bent, or missing to restore proper alignment.

Microwave not heating or making buzzing noises? This diode rectifier allows current flow in one direction and protects circuits. DIY repair takes 30 minutes.

This replacement lever restores the original lever action so your appliance opens, closes or engages controls smoothly. It's a direct-fit part that replaces a cracked, worn or broken lever to regain normal operation. What it does:

• Replaces a damaged lever that prevents a door, latch or control from operating properly
• Provides a secure pivot or release point so components engage and disengage as intended
• Common symptom fixes: lever broken, loose, stuck, or not engaging reliably
• Durable plastic construction matches the OEM fit and alignment

• Disconnect power or unplug the appliance before starting any repair
• Remove any nearby panels or fasteners to access the existing lever; retain screws for reassembly
• Align the new lever on its pivot, then snap or fasten it into place without forcing parts

This is a replacement tension spring that restores proper tension and movement on compatible Frigidaire appliance components. It helps the mechanism operate smoothly and reduces sagging, binding, or uneven motion. What it does:

• Provides tension for hinge or linkage assemblies so doors or moving parts return and stay aligned
• Restores smooth, controlled movement and reduces slapping or sudden drops
• Helps prevent binding or uneven operation caused by a weakened or broken spring
• Commonly used where a small coil spring is required to maintain part position or preload

• One tension spring

• Disconnect power and remove food/items before accessing appliance interiors or doors
• Use gloves and eye protection; springs can be under tension and may release suddenly
• Note spring orientation and attachment points before removal so reassembly matches OEM positioning

This mechanical thermostat controls refrigerator temperature by sensing evaporator or cabinet temperature and switching the compressor and fans on and off. Replaces a worn or faulty control to help restore consistent cooling and temperature regulation. What it does

• Senses temperature and closes/open circuit to run the compressor and cooling fans
• Helps maintain set temperature by cycling refrigeration system components
• Commonly linked to symptoms like warm or fluctuating temperatures, compressor not running, or continuous running
• Works as the control point for user temperature settings

• One thermostat

• Disconnect power to the appliance before accessing controls to avoid shock or injury
• Access may require removing interior panels or control housing
• Handle sensing bulb and capillary tube carefully to avoid kinks or damage