Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Traps grease and smoke from cooking. Replace when clogged or damaged to maintain ventilation efficiency. Verify compatibility with your model number.
Just installed it to the wall & presto... Read more
Microwave won't start or light stays on when door closes? A faulty door latch prevents proper switch engagement. DIY repair typically takes 15-20 minutes.
With parts from you my son repaired the door and now microwave is operating perfect.,.... A 10 minute job for him!... Thanks for not having to buy a new one!!!!! Read more
Microwave door won't open when you press the button? This door release lever connects the button to the latch mechanism. DIY fix in 30 minutes.
Turn off breaker, remove all screws { 4 on mine } inside oven door holding oven and microwave to kitchen cabinet and slide oven assembly out of cabinet {on to a temporary shelf of {4} 5 gallon buckets/plywood/bricks/shims that I made on the floor atop a scrap of carpet} just enough to access the side and rear screws of microwave's protective metal housing, then remove a total of 16 screws { there were 2 screws just inside top of "opened" microwave door that were holding top flat silver metal... Read more
The Door Switch is an OEM replacement part for Frigidaire wall ovens. It is a component located on the oven door that detects when the door is opened and closed. The door switch works alongside the control board to regulate oven operations based on door position.
Symptoms of a bad door switch can include:
Causes relate to normal wear over extended use as the door switch mechanism cycles with frequent door openings and closings. Moisture exposure or impacts could also degrade switch performance.
This OEM Frigidaire switch is compatible with Amana, Jenn-Air, KitchenAid, and some Electrolux wall oven models as well.
I diagnosed this problem via the web and the advice was spot on. The problem was a failure of the bottom door switch. I used a multimeter to verify that the switched never closed properly. It took me a minute to figure out how to remove the old switch (press a release tab under the switch while simultaneously rotating counter-clockwise). That was about the most difficult part of the repair. Read more
Microwave not heating or making loud buzzing noise? The magnetron converts electricity into microwave energy. Common DIY repair, typically done in 30 minutes.
Micro stopped working with accompanying loud hum and burning smell. Pulled out of cabinet (micro/stove combo by Electrolux) and found blown (and partially melted) magnetron. Easily found exact replacement on Appliance Parts Pros--ordered, and had micro back working in 2 days! Great search engine and pictures of parts are so helpful;. Have ordered from these folks in the past and will probably do it again. $100 part versus big cost for repair service or a replacement. Read more
Restores interior and cooktop lighting in your microwave. Replace when bulb burns out or dims for clear visibility. Verify fit with your model number.
I replaced the bulbs in my over stove microwave light. Read more
Replacement spring for microwave door latch mechanism. Restores return tension so the latch engages and releases correctly. Needed when spring is broken or worn.
This replacement motor restores reliable rotation to the component it drives—bringing back proper airflow or mechanical movement so your appliance runs as designed and noise is minimized.
Start bye removing the three screws that hold the underside of the microwave up. Once those are undone, the panel pivots down. You then need to un-attach the lights so the panel will totally come off and out of the way. The motor is plainly visible. Remove the power plug and remove the one screw then it twists out of its slot. Install the new motor and reverse the directions. Read more
Replacement glass turntable tray for your microwave. Installs on the rotating support to hold food during cooking. Replace if cracked, chipped, or broken.
A phone call to your company where a very helpful sales associate took the information I gave him including the model number of my Microwave oven. He assured me the one he recommended would be the correct size--and it was!! The item came to my address in 2 days in perfect condition and I washed it and placed it on the turntable. Couldn't have been easier, I just wish I'd done it sooner because trying to use a plate from another used Microwave oven was not successful! A very satisfied... Read more
Fix a microwave door that won't close or sticks when opening. This latch hook secures the door mechanism for proper sealing. DIY repair in under an hour.
This part was an exact replacement. I removed the door and took out the old part and replaced it with the new one. Getting the door off was the hardest part. Read more
Controls airflow in your microwave's exhaust vent system. Installs between blower and duct. Replace if cracked, broken, sticking, or missing.
It took less than a minute to find the replacement part on your website and another minute to order it. The damper was delivered well packed and in good condition in a day and a half. It took about 15 minutes to install using only a small straight slot screwdriver to lift the tabs on the oven top. Read more
Secures microwave components to cabinet or frame. Replace when bracket is broken, cracked, or worn causing misalignment or excess vibration during operation.
New part worked fine. Read more
Checked on AppliancePartsPros and found the parts, once I received the parts I pulled the outer cover of the microwave and replaced the three switches. For the price of the three switches it was cheaper to install all new. Total repair time, 15 minutes. Microwaves back up and running. Very easy fix. Read more
Protective panel that shields microwave magnetron from grease and food splatter. Snaps into interior cavity. Replace when cracked, burned, or missing.
Replaced the cover took care of the sparking and replaced the motor to fix the plate not turning. Read more
This switch/fuse kit replaces a worn or failed control switch and associated fuse to restore reliable power control. It provides the exact components needed to address common start and power interruptions. What it does:
Microwave won't turn on, made popping noise, or smells like burned electrical? The noise filter often fails when solder joints arc or short out.
When using the microwave it made a frying sound and completely stopped working. Took cover off (after unplugging) and found filter coil solder joints fried. Took a chance on replacing filter. Works perfectly now. Looking at the solder joints again, under magnification, discovered they were not done properly in the first place. Use caution with cover off, there is a capacitor near the filter that could prove dangerous. Also need tamper proof torx bit to remove 2 of the cover screws, or small... Read more