Fpfu19f8wf Parts

The Freezer Leveling Leg is an OEM part for Frigidaire upright freezers. It stabilizes and balances the appliance on uneven surfaces.

Causes relate to typical bearing wear from years of weight support. Rust forms without protective finish. Cracks develop from impact damage.

Symptoms of compromised leveling legs include:

• Excessive vibrations, noise or shaking during compressor operation
• Doors that no longer close or seal properly
• Ice maker malfunctions on frost-free models

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Replacement drive motor that powers an appliance's rotating components, restoring normal operation and reliable movement. Use this motor to address rotation failures and abnormal noises so the unit can run as intended. What it does

• Turns the appliance's rotating assemblies to enable normal operation.
• Helps when the appliance won't rotate, tumble or start turning even though power is present.
• Restores consistent speed and torque for proper cycle performance.

• Disconnect power before attempting any service to avoid shock or injury.
• Verify alignment and mounting orientation; secure all fasteners to manufacturer torque where specified.
• Inspect wiring harness, connector pins and any grommets for damage; replace damaged components as needed.

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.

Fix refrigerator not cooling, temperature fluctuations, or display errors with this electronic control board. Regulates compressor and defrost cycles.

Fixes intermittent cooling, inverter error codes, and abnormal compressor operation. Direct replacement restores variable-speed compressor control.

This is a condenser fan motor assembly that includes the motor, fan blade, and shroud. It circulates air over the condenser coils to dissipate heat and keep the compressor running at the correct temperature. Replace this assembly if the refrigerator is running warm, the compressor is overheating, or the fan is making unusual noises or not spinning.

Solid surface shelf assembly that organizes frozen goods in your freezer compartment. Replace if cracked, broken, or warped to restore storage space.

The PC Board is an OEM part for Frigidaire refrigerators. It controls and regulates various functions of the refrigerator, such as temperature settings, defrost cycles, and fan operation.

A bad PC Board can be caused by electrical issues, component failure, or damage due to power surges or mishandling. When the PC Board becomes faulty, it can result in issues such as inconsistent temperature control, improper defrosting, or failure of the refrigerator to operate at all.

Symptoms of a bad PC Board include:

• Inconsistent or inaccurate temperature control
• Failure to defrost properly, leading to ice buildup
• Unresponsive or malfunctioning control panel
• Failure of the refrigerator to power on or operate

Replace your faulty PC Board with this genuine OEM part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This wiring harness routes power and signals between appliance components to restore reliable electrical connections and proper control operation. It replaces a worn or damaged connector assembly to help stop intermittent power or control failures. What it does

• Provides secure electrical connections between control, switches, and components
• Restores continuity when original wires or terminals are damaged or corroded
• Stops intermittent operation, control communication errors, or no-power symptoms
• Helps eliminate arcing or poor contact that can cause heat or burning smells

• One wiring harness assembly

• Always disconnect power (unplug or shut off breaker) before inspecting or replacing wiring
• Confirm wire routing and connector orientation before disconnecting; photograph for reference
• Avoid pinching or stressing wires; secure harness with existing clips or ties

Replace your refrigerator's interior light bulb when it burns out or flickers. Restores clear visibility inside the fresh-food compartment. Verify fit with your model number before ordering.

This wiring harness assembly routes electrical power and signals between components to restore reliable operation. It replaces damaged or worn wiring to help resolve control, power, or intermittent operation issues. What it does

• Provides factory-style electrical connections between controls, sensors, and motors
• Restores lost or intermittent power to affected components
• Replaces frayed, burned, or broken wires and connector ends
• Helps eliminate intermittent operation, failures to start, or unresponsive controls

• One wiring harness assembly

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock
• Compare new harness to the old unit before installation
• Route harness securely and fasten with existing clips or ties to prevent pinching or chafing

Fix a refrigerator that won't cool or runs constantly with this sealed compressor kit. Restores refrigeration by replacing the failed compression unit.

Fix poor cooling or overheating issues. This condenser fan shroud assembly directs airflow across the condenser to restore cooling efficiency.

Replacement mounting screw for refrigerators and freezers. Secures panels, brackets, trim, and covers. Replace if missing, stripped, or damaged.

Replaces damaged interior light assembly to restore safe, even refrigerator illumination. Install when lights flicker, dim, or fail completely. Verify fit with your model number before ordering.

This harness with reed switch detects a magnetic field and provides a ready-made wiring connection for the appliance's door/sensor circuit, restoring reliable sensing and signal routing. What it does

• Contains a reed (magnetic) switch in-line with a multi-conductor harness to detect open/closed or presence/absence of a magnetic field
• Replaces a damaged or faulty sensor harness that can cause intermittent or no signal to the control board
• Common symptoms: appliance not sensing door/cover, controls not responding, or features tied to the sensor fail to activate
• Designed to mate with the factory connector set and routing used by the original equipment

• One complete harness with reed switch

• Verify power is disconnected before accessing wiring or replacing the harness
• Handle the reed switch and connectors gently to avoid damage; secure harness with original clips or fasteners