Fpgh3077rf Parts

This replacement surface burner restores stovetop heating for electric ranges, providing a direct, reliable heat source for pots and pans. Designed to match the original element shape and fit for a straightforward swap. What it does:

• Heats cookware on the cooktop so you can boil, simmer, and sauté
• Replaces a cracked, warped, or non-heating burner element
• Addresses symptoms such as little or no heat, intermittent heating, or uneven hot spots
• Works with the existing burner receptacle and cooktop cutout when the correct element is used

• One round surface burner element

• Disconnect power to the range before servicing to avoid electrical shock
• Remove the cooktop or lift the burner assembly per your model's service instructions
• Align and seat the element into the socket, then secure any mounting clips or screws as originally installed

A direct-replacement motor assembly that restores the appliance's fan-driven airflow. Replaces a failed fan motor so your appliance can circulate air and maintain proper operation. What it does:

• Spins the fan to provide airflow for cooling, ventilation, or heat distribution
• Stops abnormal noises related to a failing motor
• Helps restore normal temperature regulation and airflow when the fan has stopped running
• Addresses intermittent operation or no-run conditions caused by a worn or failed motor

• Disconnect power to the appliance before starting any repair
• Handle the motor and fan blades carefully to avoid damaging wiring or connectors
• Typical install requires removing access panels and mounting screws; retain hardware for reinstallation

This spark ignition module controls the spark to gas burners and oven igniters so burners light reliably. Replacing a worn or failed module restores proper ignition and stops repeated clicking or no-spark issues. What it does:

• Sends timed high-voltage sparks to surface burners or oven igniters to initiate combustion
• Coordinates ignition sequence when a burner or bake/broil is turned on
• Commonly linked to symptoms like continuous clicking, no spark, or burners that won't light
• Works with the range/oven's control system to ensure safe ignition operation

• Disconnect electrical power and turn off the gas supply before installing
• Handle the module and connectors carefully; avoid bending pins or contaminating terminals
• After installation, restore power/gas and test all burners for proper ignition and operation

The Grate is an OEM part for Frigidaire ranges and cooktops. It serves as the cooking surface, composed of sturdy grate bars spaced to allow for drainage. This grate is responsible for withstanding high heat levels during cooking and must be durable enough for heavy pans and pots. 

Causes of a bad grate can include warping, cracks, or breaks from years of use and exposure to heat. Surface rust and degradation are common and reduce functionality over time.

Symptoms of a bad grate include:

• Warped or misshapen bars that no longer lay flat
• Loose or missing bars that create an uneven cooking surface
• Pans and pots that no longer sit level, causing food to burn more easily  
• Rust and deterioration have weakened the grate structurally

This OEM Frigidaire grate replacement is compatible with ranges manufactured by Electrolux, Gibson, Kelvinator and select Kenmore models.

This valve mounting screw secures refrigerator water/ice valve assemblies and their mounting brackets, helping keep the valve stable and properly aligned. A simple replacement to address loose or vibrating valve hardware. What it does:

• Secures the valve mounting bracket to the appliance cabinet or valve body
• Fits standard 1/4-20 threaded valve mounting points
• Restores secure mounting when original screw is loose, missing, or stripped
• Helps reduce vibration-related noise and the risk of valve movement that can lead to leaks

• Disconnect power and shut off the water supply before servicing
• Start the screw by hand to avoid cross-threading, then tighten until snug
• Do not over-tighten; replace if threads are stripped or damaged

This rubber bumper cushions doors and panels to reduce noise, prevent metal-on-metal contact, and protect finishes for smoother, quieter operation. Replace worn or missing bumpers to help restore proper seating and reduce rattling. What it does:

• Absorbs shock between moving parts to prevent bangs and scratches
• Keeps doors and panels aligned for a tighter seal and quieter close
• Reduces vibration and rattling during operation
• Helps protect painted or plated surfaces from wear at contact points

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Typically a push-in or snap-in replacement; press into the original mounting hole until seated
• Inspect nearby bumpers and replace in matched sets if others are cracked or missing

This ignitor orifice assembly supplies the gas and spark alignment needed to light an oven or range burner, restoring reliable ignition for safe, consistent cooking performance. What it does:

• Delivers the correct orifice positioning and ignitor alignment so the burner lights when the oven calls for heat.
• Helps eliminate delayed ignition, clicking without flame, or weak/uneven burner lighting when failure is caused by the orifice/ignitor assembly.
• Works as the mechanical/electrical interface between the gas supply and the ignitor for safe ignition.
• Compatible with common oven/range ignition systems that use a separate orifice and hot-surface/spark ignitor assembly.

• Shut off power and gas supply before beginning service; confirm both are off.
• Handle the ignitor carefully (it is fragile); avoid touching the ceramic or heated surfaces with bare hands.
• Use proper tools and follow the appliance manufacturer's service manual for alignment and torque specifications.
• After installation, restore gas and power and perform a leak check and test cycle to confirm correct ignition and safe operation.

This electronic control circuit board manages a range of appliance functions, translating user inputs and sensor signals into controlled operation. Replacing a failed board restores correct control, display responses, and electronic features. What it does:

• Receives input from buttons/knobs and sends commands to motors, valves, or heating elements
• Interprets sensor signals to maintain normal cycles and safety interlocks
• Drives the user interface and display; a faulty board can cause blank or erratic displays
• Stops or prevents operation when control electronics fail, causing no-start or stalled cycles

• One circuit board assembly

• Disconnect power (unplug or shut off breaker) before starting any repair
• Take photos of wiring and connector locations before disconnecting to ensure correct reassembly
• Handle the board by its edges and avoid static discharge; use anti-static precautions if available
• If mounting hardware or connectors are damaged, replace them rather than forcing a fit.

The Grate is an OEM part for Frigidaire ranges and cooktops. It serves as the cooking surface, composed of sturdy grate bars spaced to allow for drainage. This grate is responsible for withstanding high heat levels during cooking and must be durable enough for heavy pans and pots. 

Causes of a bad grate can include warping, cracks, or breaks from years of use and exposure to heat. Surface rust and degradation are common and reduce functionality over time.

Symptoms of a bad grate include:

• Warped or misshapen bars that no longer lay flat
• Loose or missing bars that create an uneven cooking surface
• Pans and pots that no longer sit level, causing food to burn more easily  
• Rust and deterioration have weakened the grate structurally

This OEM Frigidaire grate replacement is compatible with ranges manufactured by Electrolux, Gibson, Kelvinator and select Kenmore models.

This hinge secures and guides a refrigerator door so it opens and closes smoothly and holds proper alignment. Replacing a worn hinge restores stable door operation and helps the gasket seal correctly. What it does:

• Provides a pivot point for the refrigerator door to open and close
• Keeps the door aligned so it seals properly and maintains interior temperature
• Replaces worn, bent, or damaged hinge hardware that can cause door sag or uneven gaps
• Reduces rubbing, binding, or noisy movement during door operation

• One hinge

• Unplug the appliance or disconnect power before starting work
• Support the door while removing or installing the hinge to prevent injury or damage
• Use the same mounting screws and positions; tighten hardware securely but avoid over-torquing
• Check door alignment and gasket sealing after installation; adjust hinge as needed per your model's service instructions

This mounting bracket secures internal components to the appliance cabinet, restoring proper alignment and stable support where factory brackets have broken or come loose. A direct-fit replacement that helps stop shifting, rattles, and misalignment. What it does:

• Provides a secure mounting point for panels, assemblies, or components inside the cabinet
• Restores correct alignment when a damaged bracket allows parts to sag or move
• Reduces vibration and rattling caused by loose or missing support
• Helps maintain proper clearances for doors and internal assemblies

• One replacement mounting bracket

• Disconnect power to the appliance before starting any repair
• Remove any obstructing panels, shelves, or components to access the bracket
• Keep original fasteners; replace only if explicitly specified by OEM instructions

This LP conversion kit lets a compatible gas range or oven be converted from natural gas to liquid propane, restoring proper burner performance and safe operation when using LP fuel. What it does:

• Replaces factory natural-gas orifices and components so burners run correctly on liquid propane
• Helps correct yellow or lifting flames, weak or uneven burners, or hard lighting caused by using the wrong fuel orifices
• Ensures fuel delivery is sized for higher-pressure propane versus natural gas
• Supports safe switching between fuel types when used per the manufacturer's instructions

• LP conversion kit components

• Installation must follow the OEM instructions exactly; keep original parts and documentation
• Shut off the gas supply before beginning work and test all fittings for leaks after installation
• Do not operate the appliance until conversion is complete and burner flames are verified safe

The Grate is an OEM part for Frigidaire ranges. As the cooking surface directly above each burner, this metallic grate distributes heat evenly while allowing burner flames visibility.

Causes of a bad burner grate can include warping or bending from oversized cookware. Gas leaks may develop due to cracks or holes worn through the grate over repeated heating cycles.

Symptoms of a bad range burner grate include:

• Uneven cooking temperatures across the grate surface
• Flames not being visible through obstructions or damage
• Detached or misshapen grates that no longer lay flat
• Potential gas leaks or safety hazards from compromised metal

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Range Lamp Assembly is an OEM part for Frigidaire stoves and ranges. It consists of the halogen light bulb, lens cover, and wiring harness necessary to illuminate the oven cavity. This lamp assembly provides light to the cooking and baking space, making it easier to view food and monitor cooking progress.  

Symptoms of a bad range lamp assembly include:

• The oven light not turning on at all  
• Dim, flickering, or intermittent light
• Burned out or blown light bulb
• Cracks or damage to the lens cover

Causes of failure can be a burned out light bulb, broken wiring, or damage from impact or heat over time. 

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.