We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement shelf support for refrigerators. Secures and stabilizes shelves to hold stored items. Replace if cracked, broken, or worn from impacts or overloading.
Ice not dispensing or auger won't turn? The drive bar transfers motor rotation to crush and dispense ice. Moderate DIY repair with video guide.
My problem started with a rusting condition in the ice bin that spiraled out of hand. I took apart the ice bin and all the hardware thinking I could clean it with the suggested baking powder. Plastic parts cleaned up like new, metal parts were pitted. I wire brushed and sanded the parts put it all back together and gave it a try. All appeared fine then two days later the ice dispenser stopped. I watched a couple of videos and most pointed to the ice auger motor. One video specifically said you... Read more
Grey plastic grille kickplate that covers the base of your refrigerator. Includes mounting clips. Replace if cracked, melted, broken, or missing.
Easy to replace. Took me less than a minute. Read more
The Main Power Board is an OEM part for Frigidaire refrigerators. This board controls and manages the primary functions of the refrigerator, including temperature regulation, defrost cycles, and the operation of other electronic components. It serves as the central hub that ensures the appliance runs efficiently and effectively.
Causes of a bad power board can include electrical surges, overheating, or component wear over time. Exposure to moisture or accidental impact can also damage the board, leading to operational issues.
Symptoms of a bad Main Power Board include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
We replaced the controller board and installed a surge protctor. The challenge was accessing the board It was underneath the refrigerator. We tipped the appliance and placed a couple of 2 x 4 pieces under the front edge. Read more
Covers and protects the dishwasher pump assembly. Replace if cracked, broken, or if plastic guides are stripped causing spray arm support issues.
The cover was easy to remove with 3 star head screws. I entered my model number on AppliancePartsPros.com dreading the cost I was about the encounter. However, the parts were very cheap, in stock, and shipped within an hour of my order. I had a question about the tracking number and received an email back in less than an hour. The cost for both parts and standard shipping was under $30. Once I received the parts, the new cover was installed, the rest of the assembly was put back back... Read more
Fix a dishwasher that won't start or run because the door won't latch. This strike receiver allows the latch to engage and signal a closed door.
I have a Kenmore dishwasher and this is the second time doing this repair. The dishwasher door wouldn’t click in place when closed and the lights on the control panel wouldn’t turn on. My kids like to push on the handle to get onto the counter causing the latch assembly piece to break after awhile. It’s a simple fix with the hardest part being getting the front panel lined back up to put back on. I ended up not needing the strike piece but got it just in case it had been bent. Read more
Fix inconsistent cooling or frost buildup with this refrigerator thermistor. Monitors internal temperature for accurate cycle control. Easy DIY repair.
I replaced the thermistor. Read more
Side rail that supports and guides your refrigerator's sliding freezer basket. Replace this hanger if cracked, broken, or worn to restore smooth sliding.
I was able to view the video then order parts on Appliancepartspros.com. Initially, I received the wrong part but we were able to resolve the issue quickly and I fixed my issue in 10 minute with the right part. Read more
Vertical flipper mullion assembly mounts to fresh-food door and pivots to seal center gap between French doors. Replace if cracked, broken, or rusting.
Replaced with new part. Read more
Frost buildup or no defrosting? This defrost thermostat monitors evaporator coil temperature to trigger defrost cycles. DIY-friendly repair, 30-45 minutes.
Replaced thermostat and heater. Read more
Refrigerator not cooling or compressor not running? The inverter control board regulates the variable-speed compressor. Restore normal cooling performance.
Fastens the auger shaft in your refrigerator's ice maker assembly. Replace if cracked, broken, or missing to secure the auger and prevent rubbing.
Replaced "Ice Crusher Housing" and "Fixed Blades Spacer, both of which had broke. Read more
Secures the crisper slide rail to the refrigerator liner for smooth drawer operation. Replace if broken or missing to restore proper alignment and support.
The Fill Tube Kit is an OEM part for Frigidaire refrigerators. It contains the tubes used to direct water from the water supply line into the refrigerator's water dispenser and ice maker. As these tubes can degrade over time due to mineral buildup or cracking, this kit provides a like-new replacement to ensure optimal water flow.
Causes of a bad fill tube include mineral or limescale deposits restricting water flow, cracks or leaks developing from general wear and tear, or accidental damage from installation or maintenance issues.
Symptoms of a bad fill tube are:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Ice jams or won't dispense? This complete ice container assembly with integrated auger stores ice and feeds cubes to your dispenser. Easy DIY fix.
Had to replace the ice container assy. They do not sell just the Ice Crusher assy. Bummer. It is a very easy fix. Just pull out old Ice Container Assy and replace with new one. Read more
This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.
Replace dispenser micro switch. Also replaced broken faceplate and rusty screws. Appliance parts Pro YouTube video was helpful in diagnosis and disassembly. Parts arrived quickly. Read more