Fuf 20Dmbrwh Ge Freezer Parts

The Evaporator Fan Motor is an OEM part for GE refrigerators. It works to circulate cold air throughout the refrigerator and freezer compartments using a compact, powerful motor.

Causes of a bad evaporator fan motor are generally related to normal wear over time. The motor must run continuously to properly distribute cool air, and this constant use can cause internal mechanisms to degrade.

Symptoms of a failing evaporator fan motor include:

• Uneven or incomplete cooling
• Unusual noises coming from inside the walls
• Less efficient operation as indicated by higher energy bills.

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

The Key Set is an OEM part for GE refrigerators that includes the necessary keys to unlock and secure your refrigerator door. 

A bad key set can be caused by misplacement, loss, or damage to the keys themselves. If you find yourself unable to access certain compartments or features because of a missing or damaged key, it may be time to replace the key set.

Symptoms of a bad key set include:

• Inability to unlock or lock 
• Keys that are bent, broken, or no longer fit into the locks
• Keys that have been misplaced or lost

Replace your missing or damaged key set with this genuine OEM part to regain control over your refrigerator. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This EZ-Set electronic temperature control board coordinates the refrigerator's cooling and defrost functions by processing thermistor inputs and user settings. When it fails, temperatures can drift or controls may be unresponsive; replacing the board restores consistent operation.

• Interprets thermistor signals to regulate cooling cycles
• Manages automatic defrost timing to help prevent frost buildup
• Responds to EZ-Set temperature adjustments from the user interface
• Common symptoms include: too warm or too cold temperatures, runs constantly or will not run, excessive frost, unresponsive/erratic controls

• Disconnect power before servicing; observe ESD precautions and handle the board by its edges
• Take photos of wiring and move connectors one at a time to the new board
• Ensure all connectors are fully seated and routed away from moving parts
• Restore power and allow up to 24 hours for temperatures to stabilize;

The Fastener Door Handle is an OEM component specifically designed for GE refrigerators. It securely attaches the refrigerator door handle in place.

Located on the exterior refrigerator door, this fastener provides the mounting point for the handle through a sturdy mechanical connection. Proper fastening of the handle is necessary for its smooth operation and to withstand regular opening/closing.

Causes of a failed fastener can include wear and tear from years of use or stripped threads due to over-tightening.

Symptoms include:

• Loose, unstable, or detached door handle
• Difficulty opening/closing the refrigerator door
• Visible damage or corrosion of fastener head/threads

This genuine OEM GE replacement ensures the handle remains reliably affixed during normal operation. Compatible alternatives include select Hotpoint, RCA, or Kenmore.

The Main Control Board is an OEM component specifically designed for GE refrigerators. As the central command center, the main control board regulates all cooling functions, monitors temperature sensors, and ensures optimal operation. 

Causes of a bad main control board can include wear through years of continual use. Exposure to moisture inside the refrigerator cabinet from occasional spillages may potentially damage electronic circuitry over time as well.

Symptoms of a bad main control board include:

• The refrigerator failing to cool or maintain proper temperatures
• Frost or ice buildup in sections of the interior  
• Inability to engage important features like the ice maker
• Fault codes or error messages displayed

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This electrical starter engages the designated circuit in your refrigerator so it starts reliably and operates as designed. Replacing a weak or failed starter can restore proper operation and prevent repeated no-start events. What it does:

• Provides initial engagement to start the specific motor/circuit it controls
• Disengages as designed after start-up to protect the circuit
• Failure symptoms may include no start, intermittent starting, repeated clicking or buzzing, and loss of cooling performance
• Helps maintain consistent refrigerator operation when matched to the correct model

• 1 starter

• Disconnect refrigerator power before servicing
• Access the part per your model's service procedure; note wire positions and orientation
• Move connectors one at a time to the new starter; seat fully without forcing terminals
• Inspect nearby wiring/terminals for heat damage and address before reassembly

The Compressor Overload Protector is an OEM component specifically designed for GE refrigerators. It plays an important safety role by protecting the compressor from damage. 

The overload protector works to monitor compressor temperature and electrically disconnect power to the compressor if it exceeds safe operating limits. This prevents overheating that could compromise refrigeration system integrity.

Causes of a bad overload protector include failing sensors, breaking off mounting tabs, or damage from physical impact over time.

Symptoms of a bad overload protector are:

• The refrigerator fails to cool and the compressor does not run  
• Abnormal compressor buzzing or rattling noises occur
• Diagnostic codes or error messages indicate compressor issues

This genuine OEM GE replacement ensures the compressor functions properly without overheating. It also helps extend the lifespan of major components. Compatible with Hotpoint, RCA, and Kenmore models as well.
 

This replacement freezer door gasket restores a tight seal to help keep the freezer cold and reduce frost buildup. Designed to fit the freezer door, it gives an easy, low-cost way to improve cooling performance and efficiency. What it does:

• Seals the freezer door to prevent warm air and moisture from entering
• Helps reduce frost buildup and maintains consistent internal temperature
• Restores proper door closure when the existing gasket is cracked, flattened, or torn
• Supports energy efficiency by minimizing cold-air loss

• Inspect door frame and mounting channel; clean and dry before installing the new gasket
• Press gasket into the door channel evenly, starting at one corner and working around the perimeter
• For best seal, level and align the door after installation; allow gasket to seat for several hours
• Disconnect power only if needed for light removal tasks

Overload protector for a refrigerator compressor that helps prevent motor damage by cutting power during overheating or electrical overloads. Replacing a failed protector can restore reliable compressor start and operation. What it does:

• Protects the compressor motor by interrupting power if the motor overheats or draws excessive current
• Works with the start device to help the compressor start and run safely
• Common symptom of a failed protector: compressor humming, clicking, not starting, or intermittent operation
• Does not include start relay or wiring; functions specifically as the motor overload protector

• Disconnect power to the appliance before inspecting or replacing the protector
• Handle compressor terminals gently and ensure the protector is seated fully on the compressor spade terminals
• Inspect the start relay and wiring while replacing the protector; replace damaged or corroded terminals

The Capacitor is an OEM replacement part for GE freezers. It is an essential electrical component that plays a role in the operation of the compressor, which is responsible for circulating refrigerant and maintaining the desired temperature within the freezer.

Symptoms of a bad Capacitor include:

• Freezer not running or turning on
• Compressor failing to start or running intermittently
• Excessive noise or humming sounds from the compressor area
• Overheating or tripping of circuit breakers

Causes of a bad capacitor can include electrical surges, age-related wear and tear, or exposure to extreme temperatures or moisture. Over time, the internal components of the capacitor can degrade, leading to failure and disruption of the freezer's cooling cycle.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore freezer models. 

This badge is the small decorative nameplate used on the appliance exterior to display the manufacturer's emblem. It restores factory appearance and covers the original mounting location for a clean, finished look. What it does

• Replaces a damaged, faded, or missing exterior emblem to restore the appliance's original look
• Snaps or adheres into the existing badge location for a factory-correct appearance
• Helps identify the appliance visually without affecting function
• Common symptom: missing, scratched, or peeled badge on the appliance front

• One replacement badge/nameplate (exact fit for the listed part number)

• Installation is typically simple: align badge with mounting location and press into place; adhesive backing or snap clips may be used depending on model
• Clean mounting surface before installing to ensure good adhesion
• Use gentle pressure; avoid sharp tools that could scratch the finish
• If clips break during removal, replace clips only if explicitly listed as included

The User Interface Control Board and Panel is an OEM replacement part for GE freezers. It is responsible for providing a user-friendly interface that allows you to easily set and adjust the temperature settings of your freezer. It allows you to conveniently monitor and control the temperature inside your freezer, ensuring your food stays fresh and frozen.

A bad user interface control board and panel can occur due to electrical issues, component failure, or damage to the panel or buttons. If you notice symptoms such as the display not lighting up, unresponsive buttons, or incorrect temperature readings, it may indicate a need to replace the control board and panel.

Symptoms of a bad user interface control board and panel include:

• Display not lighting up
• Unresponsive buttons
• Incorrect temperature readings

Restore your freezer by replacing the faulty user interface control board and panel with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This main control board is the refrigerator's central electronics module that manages temperature, defrost, and dispenser functions for reliable cooling and operation. Replaces a failed or unresponsive control board to restore electronic control. What it does:

• Controls compressor, fans, defrost heater and timing to maintain proper temperatures
• Communicates with user interface and sensors to execute selected modes and cycles
• Can resolve symptoms like no cooling, erratic temperature swings, or non-working controls
• Replaces boards that show visible damage, burn marks, or fail diagnostics

• Disconnect power to the appliance before servicing to avoid shock or damage
• Handle the board by edges and avoid touching components or connector pins
• Verify connectors and wiring harnesses are fully seated and undamaged during installation

This main control board manages the refrigerator's core electronics, coordinating cooling, defrost, fan and user-interface functions for reliable operation. Replacing a failing board restores control and helps resolve intermittent or total loss of electronic control. What it does:

• Controls compressor, evaporator/condenser fans and defrost cycle timing to regulate temperature
• Processes user inputs and runs display/indicator functions on the control panel
• Responds to sensors and relays commands to start/stop components
• Commonly replaced when the appliance shows no display, unresponsive controls, erratic cycling, or failure to cool

• One main control board assembly

• Disconnect power before servicing to avoid shock or damage
• Handle the board by edges and avoid static discharge; use anti-static precautions
• Follow the OEM wiring diagram and secure all connectors to original positions
• After replacement, verify operation and any required panel calibration

This is the refrigerator main control board — the electronic circuit module that governs compressor, fans, lights and user controls to restore normal operation and consistent cooling. What it does

• Routes power and signals between the user interface, sensors and compressor/fan circuits
• Can stop the compressor or fans from running when failed, causing warm temperatures
• May cause unresponsive display, incorrect temperature readings, or intermittent operation
• Replaces a failed control module to help restore regulated cooling and control functions

• Always disconnect power at the breaker or unplug the appliance before servicing
• Handle the board carefully and avoid touching exposed components or connector pins
• The part number on the old board matches before installing