Gbe21dskss Parts

The Fastener Handle Assembly is an OEM part for GE refrigerators, specifically designed to securely attach the refrigerator or freezer handle to the door. This assembly includes the necessary components, such as screws or bolts, brackets, and possibly end caps, depending on the design, to ensure a sturdy and durable connection between the handle and the door. 

Causes for a Fastener Handle Assembly to fail include normal wear and tear from repeated use, excessive force applied to the handle, or corrosion of metal parts due to moisture and refrigeration environment.  

Symptoms of a bad Fastener Handle Assembly include:

• A loose handle that moves or wobbles when touched or used.
• Difficulty in opening the refrigerator or freezer door due to a compromised handle attachment.
• Visible damage or wear to the components of the fastener assembly 

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Water Valve and Tube Assembly is an OEM replacement part for GE side-by-side refrigerators. It serves as the inlet valve installed inside the fresh food compartment. 

Causes of a faulty assembly can include mineral buildup inhibiting proper valve opening or cracking/splitting of aging plastic tubes. Electrical issues affecting the valve solenoid may also develop over time.

Symptoms of a problematic assembly include:

• Ice maker or water dispenser unable to consistently produce ice/water  
• Leaks present around the rear inlet area
• Valve components failed to activate 

Compatible models also include Profile and Monogram side-by-side refrigerators.

The Ice Bucket is an OEM part for GE refrigerators. It is a component that stores ice from the icemaker in the freezer compartment. The ice bucket allows for convenient access to ice on demand, fitting seamlessly within the refrigerator design.

Symptoms of a bad ice bucket include:

• Cracks or damage to the plastic material
• Inability to easily remove or insert the bucket  
• Ice falling out of the bucket improperly
• Missing parts like the handle

Note: This is just the ice bucket. It does not include other ice maker components.

Replace your worn ice bucket before further issues arise like ice spilling in the freezer. This OEM GE part restores your refrigerator’s storage and access to ice. It is also compatible with Hotpoint, RCA, and Kenmore refrigerators.
 

The Evaporator Fan Motor is an OEM part for GE refrigerators. This part is responsible for circulating air over the refrigerator's evaporator coils to ensure a uniform distribution of cold air within the unit.  

Causes for a fan motor to fail can include electrical issues, such as blown fuses or faulty wiring, wear and tear from prolonged use, and obstruction caused by ice buildup or debris. 

Symptoms of a malfunctioning Evaporator Fan Motor include:

• The refrigerator or freezer section is not cooling efficiently.
• A noticeable increase in the temperature of the fridge or freezer compartments.
• Strange noises, such as humming or buzzing, emanating from the fan area.
• The fan fails to run when the refrigerator is active, indicating a potential motor failure.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This door shelf module replaces a damaged or missing bin on your refrigerator door, restoring secure, organized storage for condiments, jars, and bottles. It snaps into the door liner to keep items accessible and in place.

• Provides on-door storage to hold bottles, jars, and condiments securely
• Replaces cracked or broken bins and restores usable door space
• Helps correct poor fit when mounting tabs are worn or broken
• Common symptoms: bin cracked, won't stay seated, sags, or items tip/fall

• Remove items from the existing bin and open the door fully
• Lift the old bin straight up to disengage it from the door rails or tabs
• Align the new module with the mounting slots, then lower/press until it locks in place
• Confirm a secure fit before reloading items

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Center Hinge is an OEM part for GE refrigerators. It is responsible for connecting and supporting the refrigerator doors, allowing them to open and close smoothly.

A bad center hinge can be caused by wear and tear over time, excessive weight or force applied to the doors, or damage due to accidental impact or mishandling.

Symptoms of a bad center hinge include:

• Difficulty in opening or closing the refrigerator doors.
• Squeaking or grinding noises when opening or closing the doors.
• The doors not staying securely closed.
• Uneven alignment of the doors.

Replace your worn-out or damaged center hinge with this genuine OEM part. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Evaporator Harness is an OEM replacement part for GE refrigerators. This harness is responsible for connecting the evaporator fan motor and the defrost heater to the main control board, allowing for cooling and defrosting. It enables the fan motor to circulate cold air throughout the refrigerator and the defrost heater to melt any accumulated frost or ice on the evaporator coils.

A bad evaporator harness can occur due to wear and tear, damage, or loose connections. If you notice symptoms such as inadequate cooling, excessive frost or ice buildup in the freezer, or the refrigerator not defrosting properly, it may indicate a need to replace the evaporator harness.

Symptoms of a bad evaporator harness include:

• Inadequate cooling
• Excessive frost or ice buildup in the freezer
• Improper defrosting

Restore your refrigerator by replacing the faulty evaporator harness with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
 

This 12-24 screw secures brackets, panels, and other hardware in GE refrigerator assemblies. Replacing a stripped or missing fastener restores a tight, rattle-free fit and helps keep doors, handles, and internal components properly aligned.

• Fastens components where a #12-24 screw is specified
• Replaces damaged, stripped, corroded, or missing hardware
• Helps resolve loose handles/panels, vibration noises, or minor misalignment caused by missing screws
• OEM-grade hardware for a precise fit in the designated locations

• Disconnect power; turn off water supply if working near water lines
• Match the new screw to the original; start threads by hand to avoid cross-threading
• Support the part being secured (door/handle/panel) during removal and installation
• Use the correct driver/bit that matches the screw head; tighten snugly without overtightening

This replacement freezer drawer gasket seals the freezer drawer to help maintain consistent temperatures and limit frost and moisture buildup. It restores the drawer seal to help the freezer run more efficiently and reduce visible frost. What it does:

• Forms a tight seal around the freezer drawer to help keep cold air inside.
• Helps reduce frost and ice buildup around the drawer opening.
• Addresses symptoms like warm/freezer temperature fluctuation, visible gaps around the drawer, or excess condensation.
• Restores intended door/drawer contact for improved cooling performance.

• Disconnect power to the appliance before beginning any service.
• Remove the drawer per your model's service instructions to access and replace the gasket; inspect the mounting channel for damage.
• Clean the sealing surface before installing the new gasket and seat the gasket evenly around the drawer; avoid sharp tools that could nick the seal.

This evaporator wire harness delivers power and control signals to the evaporator fan and defrost components. Replace a damaged harness to restore stable cooling and dependable automatic defrost performance. What it does:

• Provides plug-in electrical connections for evaporator-compartment components
• Carries power and control signals for cooling and defrost cycles
• Enables proper airflow across the evaporator and effective frost removal
• Common clues of a failing harness: heavy frost on the back wall, evaporator fan not running, intermittent cooling, or burned/brittle wires or connectors

• 1 evaporator wire harness assembly

• Disconnect power to the refrigerator before servicing
• Access the harness behind the freezer/evaporator cover; remove drawers/shelves and the rear panel
• If iced over, allow ice to melt—do not use sharp tools on coils or wiring
• Route and secure the new harness exactly like the original; fully seat each connector

This evaporator cover and fan assembly routes cold air over the evaporator and circulates it through the freezer compartment to help maintain even cooling. Replaces a damaged cover or noisy/non-spinning fan for more consistent temperature. What it does:

• Covers the evaporator coils to direct airflow and protect the fins from debris.
• Spins air across the evaporator so cold air moves into the freezer and refrigerator sections.
• Helps reduce frost buildup when the fan runs properly and air moves as designed.
• Commonly used when the freezer is noisy, not cooling evenly, or shows visible damage to the cover or blade.

• One evaporator cover with fan assembly

• Disconnect power to the appliance before starting any repairs to avoid shock or injury.
• Access is typically behind the freezer rear panel; remove shelves and panels as needed for clearance.
• Handle evaporator fins carefully to avoid damage; take care when routing wiring and clips during reassembly.

This condenser fan and housing assembly circulates air across the condenser coils to help your refrigerator dissipate heat and run efficiently. Replaces a damaged or worn housing and fan to restore proper airflow and cooling performance. What it does

• Moves air over condenser coils so the compressor can shed heat and maintain cooling
• Prevents overheating and helps the system run more efficiently
• Can stop loud fan noise, rattling, or reduced cooling when the fan or housing is damaged
• Restores correct airflow when the original housing is cracked, bent, or obstructed

• One condenser fan and housing assembly

• Disconnect power to the appliance before starting any repair
• Access may require removing rear or bottom access panels; keep track of fasteners
• Handle sheet metal edges and fan blades carefully to avoid cuts and damage
• After installation, verify fan spins freely and recheck connections; confirm proper cooling

This is a replacement vegetable drawer for the refrigerator's lower storage area, restoring sealed storage for fruits and vegetables and helping keep produce organized and visible. What it does:

• Provides a dedicated bin to store fruits and vegetables away from main shelving
• Helps contain spills and prevents produce from rolling onto shelves below
• Restores smooth sliding and secure placement when the old or cracked bin is damaged
• Fits into the refrigerator's crisper compartment to maximize usable storage space

• 1 vegetable drawer

• Remove any contents and gently lift the old bin out of its tracks to uninstall
• Slide the replacement into the same tracks until it seats and operates smoothly
• No tools are typically required; unplug appliance or disconnect power before performing any repairs if access requires moving internal panels

This top LED cover is the replacement light lens that protects and diffuses the refrigerator's top LED assembly for even interior lighting and a finished look. Replaces a cracked, yellowed, or missing lens to restore light distribution. What it does:

• Protects the LED module from dust, moisture, and impacts
• Diffuses and softens LED output for even interior illumination
• Prevents glare and visible hot spots from exposed LEDs
• Helps maintain a clean, finished appearance inside the appliance
• Can address symptoms like uneven lighting, visible LED bulbs, or a cracked/warped lens

• Disconnect power to the appliance before starting any work.
• Handle the lens gently to avoid scratching or cracking; wear gloves if needed.
• Removal/installation typically involves releasing retaining clips or removing a few screws—retain fasteners for reuse.
• Align the cover over the LED assembly and secure until it snaps or fasteners are tightened; test lighting after restoring power.