Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This replacement handle restores a secure, comfortable grip on your appliance's front panel, helping you open and close the door or drawer with confidence. It renews both function and appearance when the original handle is cracked or loose.
Our trash compactor requires you to step on foot pedal to open the door. After several years of people pulling on it without using the pedal cased it to crack. Several attempts to glue it failed to mend the crack. Ordered a new handle, got it in a couple days, fit right up, three screws and now it's good as new. Read more
Replacement fastener screw for appliances. Secures panels, trim, clips, and components. Needed when original screws are stripped, missing, or damaged.
Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on... Read more
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more
For use on power screw and ram pressure pads. Size: 4 oz. can.
Replace element Read more
Fix a refrigerator light that won't turn on or off when you open the door. This push-button switch senses door position. DIY repair in 30 minutes.
We actually were able to determine that one of the freezer switches was bad and taped it down for about 3 days. The beeping stopped. Our fridge has two freezer switches and one fridge side switch. I ordered all three from these guys. They were cheaper than Whirlpool by about $20 for parts and about $15 for shipping. The part numbers had superseded too many times to count, usually that doesn't matter but in this case it did. The new parts were just slightly bigger than the old parts AND... Read more
Fix a compactor that won't start, stops mid-cycle, or requires holding the pedal down. This drawer tilt switch is a quick 15-second replacement.
I replaced the upper switch that contacts the door in a closed position and more important the start switch contacted by lifting the start pedal. Read more
Decorative insert that fits into the recess on your trash compactor panel to finish the assembly. Replace if cracked, peeling, worn, or missing.
Easy repair but clean all the glue off the surface with paint thinner or some other remover otherwise it will look lumpy Read more
Size: 8-32 x 3/8 inch.
This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy! Read more
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Replaced It With New One Read more
Cracked or damaged control panel trim? This escutcheon covers and protects control switches from grease and spills. Simple install, reuse screws.
Replaced drive gear and power nuts. Read more
Fix a worn or cracked start button area on your trash compactor with this peel-and-stick control panel insert. Easy 5-minute DIY repair restores appearance.
Placed screwdriver into start button hole to pry up and remove old faceplate then cleaned surface. Peeled off adhesive backing on new faceplate and reinstalled. Looks perfect and took less than 5 minutes. Read more
Lost your trash compactor's red on/off switch knob? This key-style control knob restores operation in minutes. Simple plug-in installation—no tools needed.
It was great to know I could find a new one. The compactor is 20 years old. We received the part quickly. Many thanks. Read more
Touch-up paint for appliances. Covers chips, scratches, and worn areas on range tops, refrigerators, and other appliances. Includes brush applicator.
Ordered 2 infinite burner controls from Appliance Parts Pros and watched the online video on the replacement of them at the same time. When they arrived promptly, I was ready to take on the job. The fix only took about 15 minutes because I was prepared after watching the video. Read more
This deodorant insert helps neutralize and absorb odors inside the appliance, keeping the interior fresher between uses. Replace the insert when its scent fades or odors persist even after cleaning.
Fix a compactor that won't stop at the end of its cycle or makes banging noises. This ram stop limits ram travel for proper positioning. Easy DIY fix.
Secures the rotary control switch to your trash compactor's front panel. Replace if stripped, missing, or loose to keep the control knob stable and aligned.
Replaced nut and knob. Read more