Gcrg3060af Parts

The stainless drawer panel is an OEM replacement part for Frigidaire gas ranges. It is a cosmetic component that serves as the front panel or façade of the drawer compartment located beneath the oven cavity. This panel is typically made of high-quality stainless steel, designed to complement the overall aesthetic of the range and provide a sleek, modern appearance.

Symptoms of a bad or damaged Panel,Drawer,Stainless include:

• Visible dents, scratches, or discoloration on the panel surface
• Difficulty in opening or closing the drawer due to misalignment
• Rust or corrosion on the panel, especially in areas exposed to moisture or spills

Causes of a bad panel can range from accidental impacts or mishandling during installation or use, to prolonged exposure to heat, moisture, or harsh cleaning chemicals. Over time, regular wear and tear can also lead to the deterioration of the panel's appearance or functionality.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore gas range models.

This wiring harness connects a fridge's electrical components to the control assembly, restoring reliable power delivery and signal routing for proper operation. It replaces a damaged or frayed harness to reduce intermittent faults and electrical shorts. What it does:

• Routes power and control signals between the control board and internal components.
• Replaces damaged, frayed, or burnt wiring that can cause intermittent operation.
• Helps stop component failures caused by loose or corroded connector contacts.
• Restores proper operation when specific circuits show no power or erratic behavior.

• One wiring harness as shown.

• Disconnect all power before starting any repair to avoid shock or damage.
• Observe connector orientation and routing; match wire colors and terminal positions.
• Use existing clips or fasteners to secure the harness away from heat and moving parts.

The Lens is an OEM component for Frigidaire freezers. It acts as a transparent cover and protective barrier for the freezer compartment lights. Crafted for durability and clarity, the lens avoids frost and minimizes condensation while allowing visibility inside the freezer.

Causes of a bad lens can include deep scratches or cracks developing over time from repeated wiping or exposure to chemicals like frost removers.

Symptoms of a bad freezer lens include:

• Cloudiness, fogginess, or smears inhibiting internal visibility
• Cracks or breaks compromising the protective barrier
• Distorted views make it difficult to assess food levels
• Diffused lighting with shadows instead of a clear view

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Door Lock Motor and Switch Assembly is an OEM component specifically designed for Frigidaire ranges. This locking system safely secures oven doors during cleaning or self-clean cycles through the electromagnetic operation. 

Symptoms of a defective assembly include: 

• Failure to engage or release the door lock function
• Loud buzzing or grinding noises from internal mechanisms  
• Error codes related to door lock detection problems

Causes relate to wear from continual operation of locking solenoids over extended use. Exposure to cooking residues and cleaning chemicals can deteriorate switches. 

This OEM Frigidaire part is also compatible with some Kenmore and GE appliance brands. Replacing worn components restores reliable door locking to automatically secure during high-heat cycles. Timely maintenance preserves safety functionality.
 

The Cap-Burner is an OEM replacement part for Frigidaire cooktops. It is a component located at the top of each burner element on the cooktop. The cap-burner sits directly over the burner element to distribute and maintain heat levels evenly across the heating surface. 

Causes of a bad cap-burner can include warping or distortion from excessive heat exposure over time. Wet or sticky messes can also lead to clogging or blockages.

Symptoms of a bad cap-burner include: 

• Uneven or inefficient heating of pots and pans placed on the burner surface
• Hot spots or areas of excessively high heat 
• Burner elements that do not ignite or power on as expected
• Smoke or burning smells coming from below the cap-burner

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

The Surface Burner Cap is an OEM part for Frigidaire ranges. It fits over the surface burner, providing a protective cover while ensuring proper gas flow and flame distribution.

A bad surface burner cap can be caused by wear and tear, damage, or improper cleaning. When the burner cap becomes faulty, it can result in issues such as uneven flames, inefficient heating, or difficulty in maintaining a consistent temperature.

Symptoms of a bad surface burner cap include:

• Uneven or flickering flames
• Difficulty in reaching desired temperatures
• Excessive gas odor during burner operation

Replace your faulty surface burner cap with this genuine OEM Frigidaire part to restore your cooktop. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This hex head screw secures panels, brackets, and small components on appliances, restoring proper fit and stability. It's a direct replacement fastener when an original mounting screw is missing, loose, or damaged. What it does:

• Secures panels, brackets, trim, and internal components to prevent rattling or movement
• Replaces stripped, missing, or damaged mounting screws that cause loose parts or misalignment
• Restores reliable mechanical fastening so doors and panels sit flush and operate correctly
• Works as a general-purpose appliance mounting screw when original fasteners are worn

• Always disconnect power to the appliance before starting any repair
• Match the screw to the original location and thread engagement; start by hand to avoid cross-threading
• Use the correct driver or socket for the hex head and tighten until snug—do not overtighten
• If the original hole or threads are damaged, repair or replace the mating hardware before installing the screw

This replacement glide helps a refrigerator or freezer drawer open and close smoothly and keeps the drawer aligned for reliable operation. It restores proper sliding action and reduces sticking or scraping. What it does

• Replaces a worn or broken drawer glide to restore smooth drawer movement
• Supports the drawer to prevent sagging and misalignment
• Helps reduce rubbing, sticking, and noisy operation during use
• Maintains proper drawer tracking so the drawer seats correctly

• Disconnect power to the appliance and remove food or contents from the drawer before starting
• Remove the drawer per your model's service instructions to access the glide
• Most installations are simple push-in or screw-replace procedures; keep fasteners from the original assembly

This part is a genuine main top assembly made for use with ranges.The main top assembly provides a safe and secure surface for the user to balance cookware and heat up food. Over time, the current main top might become worn or damaged, including being dented, bent, corroded, detached, or excessively dirty. In such cases, this part will require replacement. This repair can be done with regular household tools. Make sure the range has been powered off and allowed to cool down entirely before attempting to replace the main top.It is manufactured by Frigidaire and has been sourced directly from the manufacturer. It is sold individually. This main top assembly is manufactured from high-quality, durable, non-corrosive metal. It is an authentic replacement part and thus is compatible with ranges manufactured by Frigidaire, Electrolux, Gibson, Kelvinator, and Westinghouse.