Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Double-style bushing supports the washer lid hinge pin. Replace worn or cracked bushings to restore smooth, quiet lid operation and proper alignment.
Not hard when you have videos and a mechanical background....piece of cake.... Read more
Cushions where the washer lid meets the top panel to soften closure and protect the finish. Replace worn, cracked, or missing bumpers to reduce noise.
The problem was most likely the evaporator fan motor but it could have been a bad blade, loose parts or bad motor mounts. Hard to tell without taking everything apart and inspecting. Since fridge was 17 years old I decided to order the entire evaporator fan assembly as shown in the parts diagram including fan blade, motor brackets, motor, motor mounts, screws, etc. Getting to the assembly involved removing the ice maker unit plus the entire rear inside of the freezer section. Parts cost around... Read more
Adjustable leveling leg threads into washer base to stabilize cabinet and reduce vibration. Replace if cracked, broken, or missing for proper support.
Took the old leveling legs out and put the new ones in Read more
Replaces a cracked or leaking wash tub to restore water containment and drum support. Fixes leaks, rubbing noises, and vibration. Confirm fit by model.
I ordered a new mode selector and new tub bearing. Upon disassembly, I noticed that the plastic outer tub had actually heated up around the tub bearing and tub seal area, such that the new tub seal did not fit tightly. I ordered a replacement outer tub, and reassembled all the new parts. During assembly, I installed the new tub seal upside down, but recognized it while re-watching the how-to video. I pulled the assembly back off and flipped the seal over, then reassembled it again. I also put... Read more
Plastic bushing that fits inside your washer's lid hinge for smooth pivoting. Replace if worn, cracked, or causing lid misalignment and squeaking.
Secures the drive pulley to the transmission shaft in top-load washers. Replace if the original nut is backing off, stripped, or missing.
10-18 hex washer screw for securing panels, trim, brackets, and components in appliances. Replaces lost, stripped, or corroded fasteners.
The auger motor failed and wouldn't turn. I replaced the motor and it works without a problem. Make sure you dont throw away the motor boot or buy one if you don't have one. Otherwise, the temperature will freeze up the motor and lead to premature failure. Read more
Size: 14-10 a trt 7/8 s.
Replaced the hub nut, tub bearing split ring, tub seal, hub washer and agitator coupler. I watched multiple times the APP video. It was extremely helpful and I would not have attempted this without seeing the video. I had a lot of trouble getting the hub nut off. I used an 1 5/8" 6 point strike box wrench and a 4# hammer to get it off. I sprayed it with WD 40 5 or 6 times over of the course of a week to let it soak. I finally got it off. Had I known that the shaft is not round I would have... Read more
12-pack of inlet hose washers for washers and washer dryer combos. Replace cracked, worn, or missing washers to prevent leaks at water connections.
I called on your service, a person on the phone name Mr.Berry ask what the matter was . I told him the said a water valve should fix it . it sure was the right fix. thank you guys and thank you Mr. Berry. john m Read more
Size: 8-32 t. Includes 12 screws.
Includes 12 screws.
Washer won't advance through cycles or drains at the wrong time? This timer controls cycle sequencing through wash, rinse, and spin steps. DIY repair.
Replaced the Timer We bought the part over the phone with appliance parts pro they were super nice shipping was fast!!! Thanks so much!!! Read more
This backsplash assembly replaces the rear panel on a freestanding range to restore wall protection and the appliance's finished rear appearance. It covers openings at the back and helps keep wiring and components protected and tidy. What it does:
I took of the backsplash and took the hose off of the pressure switch and accidently broke off the stem of the pressure switch and the catch parts of the pressure switch. I put some Krud Cutter into the pressure switch hose and blew into it until I got air to flow. I stopped the tub from over flowing and replace the pressure switch and backsplash. Read more
8-18 hi/lo 5/8
Secures washer components with a molded sleeve that protects surfaces and reduces vibration. Replace if cracked, worn, or missing to restore secure fit.
Thanks to your video's really helped. I now know how to completely break my washer down. Actually these parts are the only parts I haven't change out, besides the motor. Your computer system is wrong on the belt. I still haven't received the correct belt I have talked to 3 different tech. They keep saying I am wrong. I am not a dummy. I do know the belt ya shipped is TO SHORT. It doesn't even go around the pulley much less reach the motor. I am lucky for right now my belt is still in good... Read more
This shipping bar assembly secures the oven door and internal components during transport to prevent movement and damage. Replacing a damaged or missing shipping bar helps ensure the range or oven door stays protected while moving the appliance. What it does: