Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replace your washer's drain hose if cracked, leaking, or damaged. Connects the pump to the standpipe for proper water drainage during wash cycles.
I suspected the tub gears where ready to break so I dismantled my LG WM2032HW front load washer. I found the spyder gear corroded and broken. I also found that the stainless steel drum abraded the front tub cover so bad, it was cracked. My washer is an early model and always had standing water in the door seal after a wash. What I learned is LG stopped making the orginal front tub cover and replaced it with one that had a drain hole at the bottom front edge. I also learned that this new... Read more
Usually ships within 4 - 14 days
Seals the flood/overflow hose connection to your washer tub. Replace if water seeps from the tub area or the gasket feels soft. Confirm fit by model.
Pulled front panel off. Unbolted and removed top cover. Removed tub trim cover. Removed and replaced gasket and dampers. Put it a back together took about 20 minutes Read more
Supports the washer drum for smooth, quiet spinning. Replace if you hear grinding noises or excessive vibration during cycles. Confirm fit with your model.
Secures your washer's drain hose to the standpipe or laundry tub. Replace if cracked, broken, or missing to keep hose positioned and prevent dislodging.
Ordered new hose from appliance parts pro. Part came in 2 days. Easy to replace. Read more
Replaces the front outer tub cover that houses the door boot seal and aligns the spin basket. Order a new cover if yours is cracked or worn from use.
The upper counter-balance weight mount design is a poor design to begin with. It started to rattle loose approximately 5yrs into the 8yrs that we've owned it. As it would start to loosen up (as evidenced by the loud banging noise exhibited during operation); I'd shut it down, pull the top off, remove the weight (it was almost always half rattled off at this point), wrap the mount lugs with friction tape (the plastic lugs were being worn down/chaffed by the balance weight), put the weight back... Read more
Locking pin for shock absorber.
Pivot hanger assembly that supports and stabilizes washer components. Replace if worn, damaged, or causing misalignment to restore smooth movement.
I ordered both the hot and cold water inlet valves because I wasn't sure which one may have been faulty. I installed them exactly the way the on line video showed, tested them and reinstalled the top of the washer. Checked several days and have found no sign of water. This was such an easy fix! Read more
Replaces a worn, cracked, or missing rotary control dial on your washer. Restores clear, tactile control for selecting cycles and settings.
Order a replacement dial and control knob from Appliance Parts Pros and replaced according to their helpful instructional videos. The parts were perfect replacements and easily replaced, working exactly as they should. The parts were shipped amazingly fast and with complete satisfaction. Will happily do business again with Appliance Parts Pros. Read more
Interior support trim that secures the door assembly and provides a finished surface inside your washer door. Replace when cracked, damaged, or worn.
Replace the catch. Read more
Push-in plug button for top-load washers. Snaps into trim openings to cover unused holes and restore a clean finish. Replace if cracked or missing.
Replaces cracked, corroded, or broken inner drum assembly in your washer. Includes perforated basket, spider support, and lifters as one unit.
This was the 2nd time my husband and I had to replace the bearings in just over a year. This time we decided to replace the spider because of the corrosion on the shaft which goes through the water seal. I believe we had the corrosion on the last repair but wasn't informed enough to realize to check for this. Again the job took us days, it's a straight forward job but there are times you have problems, such as pounding the shaft out of the bearings. We had to soak overnight and still had to... Read more
Drum bearing bushing for washers. Installs between drum and bearing assembly. Replace if cracked, worn, or missing to restore proper drum support.
Replaced the bearings Read more
Fix leaks or poor water flow with a new washer inlet hose. This part channels household water supply into your machine for proper filling and operation.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.