Gdfe10pgj2bb Parts

This control panel assembly provides the front user interface and mounting surface for the dryer's controls, restoring a clean, operable console and original appearance. Fits in place of a cracked, faded, or non-functional panel. What it does:

• Houses the control buttons, knobs and display area so you can select cycles and options
• Replaces cracked, melted or cosmetically damaged panels that interfere with normal use
• Restores a secure mounting surface for switches and wiring to prevent loose connections
• Can resolve issues caused by damaged or warped panel surfaces that block button actuation

• One white control panel assembly as shown

• Disconnect power to the appliance before starting any repair to avoid shock
• Requires removing the dryer's top/trim and unplugging control board connectors; keep track of screws and wire harness locations
• Handle the display and plastic trim carefully to avoid scratching; do not force connectors

The Door Hinge Assembly right is an OEM component specifically designed for GE dishwashers. This door hinge assembly is located on the right side of the dishwasher door and is responsible for securely and smoothly mounting the door while enabling its opening and closing motion.  

Causes of a bad Door Hinge Assembly Right include loose or stripped screws, worn out bearings or bushings, or bent or fatigued metal from repeated use. 

Symptoms of a bad door hinge assembly include:

• The door not latching or sealing properly
• Difficulty opening and closing the door  
• Excessive noise or vibration from the door
• Misalignment that causes the door to rub or interfere

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This pump isolator hanger cushions and secures the washer drain pump to reduce vibration and noise while keeping the pump properly positioned for reliable water flow. Replaces worn or broken hangers to restore stable pump mounting. What it does

• Cushions the drain pump to reduce vibration and rattling during spin and drain cycles
• Keeps the pump aligned to prevent rubbing, misalignment noise, or premature wear
• Helps maintain a secure pump connection to reduce movement that can lead to leaks
• Used when hanger is cracked, torn, missing, or allowing excessive pump movement

• One pump isolator hanger (single piece as shown)

• Disconnect power and turn off water supply before starting any repair
• Drain remaining water from the washer and access the pump per your model's service instructions
• Inspect surrounding mounting tabs and fasteners; replace any damaged hardware

This main conduit is a molded protective channel that routes and shields the appliance's wire harness to help prevent chafing and moisture exposure. It keeps wiring organized for safer, more reliable operation. What it does:

• Protects wiring from abrasion, pinching, and contact with sharp edges
• Keeps harness routed neatly to reduce strain and prevent snagging
• Helps limit exposure to moisture and debris around electrical connections
• Can be replaced when conduit is cracked, split, or missing to restore proper protection

• Disconnect power to the appliance before beginning any work
• Remove access panels as needed to reach the existing harness conduit
• Slide or snap the conduit into place, ensuring the harness is fully seated and not pinched
• Inspect wiring for damage; repair or replace any frayed insulation before reassembly

This configured UI control board is the user interface assembly that lets you select wash settings and displays status messages, restoring normal control and feedback to the washer's front console. It replaces a damaged or non-responsive control surface to regain reliable operation. What it does:

• Registers button presses and rotary/selector inputs so the washer follows selected cycles and options
• Sends user commands to the main control so cycles start, stop, and change as intended
• Provides visual status indicators and error message reporting on the console
• Commonly used when buttons, lights, or the display are unresponsive or produce incorrect feedback

• One configured UI control board

• Disconnect power before servicing to avoid shock or damage
• Handle the board and connectors by the edges; avoid touching circuit traces or components
• Reconnect all harnesses securely and verify wire routing before restoring power

The Door Hinge Assembly Left is an OEM component specifically designed for GE dishwashers. This door hinge assembly is located on the left side of the dishwasher door and is responsible for securely and smoothly mounting the door while enabling its opening and closing motion.  

Causes of a bad Door Hinge Assembly Left include loose or stripped screws, worn out bearings or bushings, or bent or fatigued metal from repeated use. 

Symptoms of a bad door hinge assembly include:

• The door not latching or sealing properly
• Difficulty opening and closing the door  
• Excessive noise or vibration from the door
• Misalignment that causes the door to rub or interfere

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This grounding plate is a stamped metal bracket that provides a secure electrical ground connection for the appliance, helping protect components and reduce shock risk. It's a direct-replacement part used where the appliance chassis requires a dedicated grounding point. What it does:

• Provides a reliable chassis-to-ground connection for electrical safety.
• Maintains a stable grounding path for control boards and metal panels.
• Helps address symptoms such as intermittent electrical faults, tripped breakers, or grounding-related error codes when a damaged or missing bracket is suspected.
• Replaces a corroded, bent, or broken grounding/mounting plate to restore proper contact.

• One grounding plate

• Turn off power to the appliance at the breaker and unplug before servicing.
• Mount to the specified chassis location using the original screws or fasteners; ensure clean, bare metal contact for a good ground.
• Do not modify the part; if screw holes or fasteners are missing, replace with OEM-specified hardware.

This control box bottom is the lower housing that protects and supports the appliance's control electronics, helping keep wiring and components secure from debris and moisture. Fits into the control assembly to restore proper enclosure and support. What it does:

• Provides a protective lower enclosure for the control board and wiring harness
• Helps keep dust, lint and moisture away from sensitive electronics
• Secures the control board and related connectors in their correct position
• Prevents rattling or movement that can cause loose connections or noise

• One control box bottom (base cover) as pictured

• Disconnect power before servicing to avoid shock or component damage
• Handle electronics carefully and avoid touching circuit contacts
• Installation typically requires basic hand tools and removal of the control housing

This black control panel assembly restores the user interface and front-facing controls for your appliance, providing a clean, finished look and reliable button/touch operation so you can select cycles and settings with confidence. What it does:

• Houses the push buttons/touch controls and display used to select cycles, temperatures, and options
• Transmits user inputs to the appliance control board so functions start as expected
• Replaces cracked, faded, or damaged panels that interfere with button access or readout visibility
• Commonly used when buttons are unresponsive, physical damage is present, or the panel cosmetics need renewal

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Remove surrounding trim or fascia to access mounting screws and connectors
• Handle the panel and any attached ribbon cables or connectors carefully to avoid damage

This small plastic clip secures a refrigerator's wiring conduit or harness to the cabinet, keeping wires routed and protected from abrasion. It helps reduce strain on connections and prevents wires from contacting moving parts. What it does:

• Holds wiring conduit or harness in place to maintain neat routing
• Prevents wires from rubbing on sharp edges or moving components
• Reduces strain on electrical connections that can cause intermittent faults
• Helps maintain safe separation between wiring and high-heat or mechanical areas

• Turn power off at the appliance and unplug before inspecting or replacing wiring clips
• Remove access panels only as needed to reach the clip; avoid stressing surrounding wires
• Snap the clip into the original mounting slot or replace any damaged fasteners for a secure fit
• If wires show damage or burns, replace the wiring/harness

This drain pump hanger secures the washer's drain pump to the outer tub, keeping the pump and hoses aligned so the pump can remove water reliably. Use it to replace a cracked or broken support that lets the pump shift. What it does

• Holds the drain pump firmly in place and maintains proper pump alignment.
• Helps reduce pump vibration and noise from a loose or mispositioned pump.
• Prevents the pump from pulling on hoses or becoming dislodged during the spin/drain cycle.
• A worn or broken hanger can contribute to poor draining, intermittent drainage, or unusual pump noise.

• One drain pump hanger.

• Disconnect power to the washer before beginning any repair.
• Access typically via the washer's lower front or rear panel; follow for disassembly.
• Inspect and reuse mounting hardware and grommets if undamaged; replace if corroded or broken.

This 4-button control panel membrane switch replaces a worn or unresponsive front-panel button assembly to restore control input on the appliance. It provides direct tactile buttons for common cycle and function selections. What it does:

• Replaces the appliance's 4-button user interface so button presses register correctly
• Restores reliable touch/press input when existing buttons are sticky, cracked, or non-responsive
• Works as the primary input surface for start, stop, cycle select, or similar basic commands
• Helps avoid miscommands caused by damaged or worn button contacts

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Installation typically requires removing the console or control bezel to access the switch assembly
• Handle the membrane carefully; avoid folding or creasing the flex contact area