Gdfe10pgj2bb Parts

Note: Left side hinge

This user interface board controls the appliance's front-panel buttons and service-configured functions, restoring reliable button response and menu control. Designed to replace a failed 4-button interface for models that use this configured service board. What it does:

• Registers button presses and sends commands to the main control board
• Restores responsive front-panel controls when buttons are unresponsive or intermittent
• Helps resolve control-related errors, unresponsive displays, or menu/navigation failures
• Works with service-configured settings tied to the appliance's control system

• One user interface board (4-button, configured service)

• Disconnect power before servicing to avoid shock or damage
• Handle the board carefully; avoid electrostatic discharge (use a grounded strap if available)

This control panel assembly is the user interface console that houses the buttons and display for your appliance, restoring full control and visible status feedback. It replaces a cracked, unresponsive, or cosmetically damaged console. What it does:

• Provides the button switches and display area used to select cycles and options
• Restores responsive button input when the original panel is unresponsive or sticky
• Returns visible status and setting feedback when the display or indicator lights fail
• Replaces a cracked, broken, or cosmetically damaged front console surface

• One control panel assembly

• Disconnect power to the appliance before starting any repair to avoid shock
• Remove outer console or trim to access mounting screws and connectors
• Handle the assembly carefully to avoid damaging the display or button contacts

This door foam block cushions and seals the appliance door, helping reduce vibration and prevent drafts or leaks where the door meets the cabinet. It replaces worn or damaged foam to restore a tight, even door fit and quieter operation. What it does:

• Replaces the foam block located on the appliance door to restore proper sealing and contact
• Helps reduce noise and vibration caused by door movement or uneven contact
• Minimizes air or water leakage at the door seal when original foam is compressed or degraded
• Simple, passive component—no electrical function

• Install by removing the door trim or access panel per your model's service instructions
• Ensure the mounting surface is clean and dry before placing the foam for best adhesion and fit
• Use basic hand tools; avoid forcing the foam into place to prevent tearing
• Disconnect power and follow manufacturer safety guidance before servicing the appliance

This is the front console control assembly that houses the user buttons and electronic control board to operate washer/dryer cycles. Replaces a damaged or unresponsive control panel to restore normal cycle selection and display feedback. What it does

• Accepts user inputs and sends commands to the appliance's main control system.
• Powers and drives the cycle display and indicator lights.
• Can cause unresponsive buttons, no display, or failure to start when faulty.
• May produce intermittent operation or erratic cycle behavior if damaged.

• Disconnect power to the appliance before starting any work to avoid electrical shock.
• Handle the board and connectors carefully; protect against static and avoid touching components.
• Basic hand tools are typically required; secure mounting screws and connector seating during reassembly.
• Refer to your model's service manual or wiring diagram for exact connector locations and removal steps.

This panel control assembly replaces the washer's user console to restore button and display control, helping return cycle selection and status feedback to normal. Designed as a direct-fit OEM-style control for affected units. What it does

• Receives user inputs (buttons/knobs) and sends cycle commands to the washer's control system.
• Controls and displays cycle status, time remaining, and option selections.
• Resolves symptoms like unresponsive buttons, blank or erratic display, or inability to select cycles.
• Works with the washer's main control to manage start/pause and option functions.

• One panel control assembly (console) as shown.

• Disconnect power before servicing to avoid shock or damage.
• Handle the assembly carefully to avoid damaging ribbon cables and connectors.
• Check connector alignment and secure mounting when installing; test basic functions before full reassembly.
• If display or control issues persist after replacement, check the main control and wiring harness for faults.

The Sump Overmold and Gasket Service Kit is an OEM part for GE dishwashers. Containing both the sump overmold and new gaskets, this kit replaces critical components in the lower dishwasher tub assembly.  

Causes of a bad sump or gaskets can include deterioration of rubber materials over multiple years of use and high heat. Mineral buildup during the wash cycle may also damage sealing surfaces.

Symptoms of a bad Sump Overmold and Gasket Service Kit include:

• Leaks or water entry in the bottom of the dishwasher 
• Excess moisture inside cabinet panels
• Inefficient or incomplete drying performance 

This genuine GE part is compatible with select Hotpoint, RCA and some Kenmore models as well.

This configured service UI control board replaces the appliance's user interface assembly to restore control and display functions. It lets the range/oven accept input from the touchpad/keys and communicates commands to the main control. What it does:

• Receives and interprets button/touchpad commands so the oven/range responds to user input
• Drives the front display and status indicators for bake, broil, timers and clock
• Sends user commands to the main control board for heating and function selection
• Resolves symptoms such as unresponsive buttons, blank or erratic display, or failure to start when inputs are ignored

• Disconnect power to the appliance before attempting any repair to avoid shock
• Handle the board by the edges and avoid touching components or connector pins
• Verify electrical connections and proper seating of ribbon/plug connectors during reassembly

This button tree is the push-button assembly for the appliance control panel, restoring reliable button actuation and user input. It replaces worn or damaged push-button contacts so the panel responds properly to selections. What it does:

• Provides the individual push-button contacts for the control/keypad area so each press registers correctly.
• Replaces cracked, sticky, or unresponsive buttons that cause missed or intermittent inputs.
• Helps resolve control-panel behavior such as buttons that must be pressed repeatedly or that do not engage.
• Restores tactile feedback and consistent operation of the front-panel buttons.

• One button tree

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock or damage.
• Replace through the control panel access area; removal of the appliance's console or trim may be required.
• Handle the assembly and ribbon/connector carefully to avoid bending contacts or damaging the connector.

This 10-18 x 5/8 screw secures panels and components on compatible appliances, restoring proper fit and preventing rattles or loose parts. It's a direct-fit fastener used where the OEM called for a #10-18 thread, 5/8" length screw. What it does

• Fastens trim, panels, brackets, and internal components to restore secure fit
• Stops vibration-related rattling or shifting caused by missing or loose screws
• Matches OEM thread and length to ensure proper engagement and alignment
• Used wherever a #10-18 x 5/8 machine/tap screw is specified in the parts list

• One screw (10-18 x 5/8)

• Disconnect power before working on the appliance and follow all safety precautions
• Use the correct screwdriver or bit to avoid stripping the head
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten
• Replace any stripped or damaged mating threads or hardware for a secure repair