Gdt55ohsd6ss Parts

This detergent plate is the replacement dispenser component that holds and releases detergent during the wash cycle, ensuring detergent is delivered when the machine runs for proper cleaning performance. What it does

• Holds detergent inside the dispenser area until the wash cycle calls for release.
• Opens or allows detergent to be flushed into the wash chamber at the correct time.
• Common symptom: detergent stays in the dispenser and doesn't release, leaving dishes or laundry soiled.
• Common symptom: damaged, cracked or warped plate can prevent proper release or seating of detergent.

• One detergent plate

• Disconnect power (and water if applicable) before accessing the dispenser to avoid shock or injury.
• Handle the plate carefully; plastic parts can crack if forced or over-tightened.
• Remove the door/dispenser trim per your model's service instructions to access the plate; reinstall ensuring proper alignment so the dispenser seals and operates correctly.

This gray dishwasher vent releases moist air from the tub during the dry cycle on hybrid-dry models. Replacing a damaged vent helps control steam and condensation for more consistent drying and a cleaner door area.

• Directs steam out of the tub during hybrid drying
• Helps reduce interior condensation for improved drying results
• If cracked, warped, or loose, you may notice steam escaping at the door, moisture on the console, or dishes that stay wet
• Visible damage or discoloration around the vent area can indicate replacement is needed

• Disconnect power at the circuit breaker before servicing
• Access is typically through the inner door panel; handle sharp edges and note original orientation
• Ensure the vent seats evenly and fasteners are secure without overtightening
• Run a short cycle and check for proper venting/steam control after reassembly

The Flat Chrome Badge is an OEM part for GE refrigerators. It is responsible for displaying the GE logo and model information on the front of the refrigerator. As an identifiable brand marker, the badge contributes to the overall appearance and style of the appliance.

Causes of a bad badge can include damage from impacts or bending, discoloration or tarnishing over time, or simple wear and tear that renders the badge appearance faded or illegible.

Symptoms of a bad badge include:

• A missing, loose, crooked or illegible badge
• Signs of denting, scratching or corrosion
• An outdated or inconsistent badge that doesn't match the model

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

This 10-32 x 1/4-inch zinc-plated screw secures internal panels and hardware in select dishwashers. Replace a missing, stripped, or corroded fastener to restore a tight fit and help prevent vibration or loosening during operation.

• Fastens brackets, panels, or components that use a 10-32 machine thread
• Replaces hardware that is missing, stripped, or rusted
• Helps reduce rattling or vibration from loose assemblies
• Supports proper component alignment for reliable operation

• Disconnect power and water supply before servicing the appliance
• Remove the old fastener and verify thread size and length match before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Replace damaged clips, nuts, or inserts that won't hold a 10-32 screw securely

The DC Harness is an OEM component specifically designed for GE dishwashers. This harness allows power to flow while protecting sensitive wiring from damage. It connects the control board to other electronics like the user interface, motor, heating element, and more. 

Causes of a bad harness include wire fatigue from constant bending, cuts or abrasions to the insulation over time or damage due to moisture exposure. 

Symptoms of a bad DC Harness include:

• Lights flickering or not illuminating fully  
• Delayed or sluggish response from controls
• The dishwasher failing to start cycles or stop running
• Components not receiving adequate power 

This GE OEM replacement harness is also compatible with some Hotpoint, RCA, and Kenmore models.

This dishwasher fill funnel guides water flow into the appropriate channel, helping ensure proper distribution during wash cycles. Replacing a warped or damaged funnel can prevent leaks and restore consistent spray performance.

• Directs water into the dishwasher's internal water feed path
• Helps maintain correct water pressure for spray arms
• Common failure signs: leaking at the funnel area, poor spray performance, residue on dishes, or misalignment with the water feed tube
• Physical damage, warping, or a loose fit are typical replacement indicators

• Disconnect power and turn off water supply before servicing
• Access from inside the tub; remove any retaining screws or clips
• Inspect and reuse existing hardware/seals if still in good condition
• After installation, run a short cycle and check for leaks or misalignment

This fill funnel hose directs incoming water from the inlet assembly into the tub through the fill funnel. Replacing a worn or cracked hose helps stop leaks and restores a reliable, sealed fill path for consistent wash performance.

• Carries water from the inlet assembly through the fill funnel into the tub
• Maintains a watertight path to prevent external leaks
• Symptoms of failure: dripping during fill, puddles beneath the unit, or visible cracks/splits in the hose
• A significant leak may lead to low water level or extended fill times

• Disconnect power and shut off the water supply before servicing
• Remove the toe-kick/kickplate; pulling the dishwasher forward may be needed for access
• Place a towel or pan to catch residual water; move clamps, remove the old hose, and fully seat the new hose on both fittings
• Re-secure clamps, restore water and power, and run a short fill to check for leaks before reinstalling panels

Size: 8-16 x 2 inch ss.

Restore your appliance's factory look with this badge assembly. It replaces a missing, cracked, or faded logo on the refrigerator exterior, delivering a clean, professional appearance without affecting performance or operation.

• Decorative nameplate/logo for the refrigerator exterior
• Replaces cracked, faded, loose, or missing badge
• Restores a clean, factory appearance
• Cosmetic component; does not impact cooling or function

• Disconnect power before servicing the appliance
• Protect the finish; use a plastic trim tool to remove the old emblem if needed
• Clean and dry the mounting area; align with locating marks/holes and secure per your model diagram

Right-hand door trim that replaces damaged or worn outer trim to restore the door's appearance and protect the door edge. Fits the right side and matches OEM fit and finish for a factory look. What it does:

• Covers and protects the outer edge of the refrigerator/freezer door from chips, dents and wear
• Restores a finished appearance when original trim is cracked, broken or missing
• Holds the door edge trim in place and conceals mounting points and seams
• Common symptoms: visible cracks or breaks in right-side door trim, loose or missing trim, or cosmetic wear

• Disconnect power to the appliance before starting any repair
• Handle trim carefully to avoid scratching the finish or damaging clips

The Filter Coarse is an OEM component specifically designed for GE dishwashers. It refers to the screen installed before the wash pump that traps soil and food particles. Subject to continuous wear from both water circulation and collected debris, the filter mesh can worsen over time.  

Causes of a bad coarse filter include:

• Clogged perforations blocking drainage and reducing water pressure  
• Loose mounting clips releasing trapped soils back into wash water instead of tube drain 
• Stretched or warped mesh no longer shutting tight to form a watertight seal

Symptoms of a failed coarse filter include:

• Soil tracked throughout the dishwasher unseen 
• Excessive residue left on dishes after washing and rinsing cycles
• Puddling inside the tub or continuing sound of draining after the cycle ends

This GE replacement part is also compatible with some Hotpoint and RCA models.

Size: 10-16 ab.

The AC Harness Assembly is an OEM part for GE dishwashers. As an integral part of the electrical system, this harness is designed to safely connect and supply power to critical components underneath the tub. 

Causes of failure involve cracked insulation, damaged connectors, or grounding problems developing over extended use.

Symptoms of a faulty harness include:

• Intermittent operation of systems or cycles  
• Error codes related to electrical malfunctions
• Loose, detached, or rubbed wires exposing live circuits

This OEM GE replacement is also compatible with select Hotpoint, RCA and select Kenmore models.

Replacement fill funnel hose that routes incoming water into the appliance's fill system. Restores proper water flow to the fill inlet and helps stop leaks at the funnel connection when the original hose is cracked or worn. What it does:

• Channels incoming water from the inlet to the appliance fill assembly.
• Replaces cracked, split, or collapsed funnel hoses that can cause leaks.
• Common symptoms it can fix: water leaking at the funnel connection, slow or incomplete fill, water pooling beneath the appliance.
• Simple direct-replacement part—matches the original funnel hose routing and connection points.

• Always disconnect power and shut off the water supply before servicing the appliance.
• Inspect mating fittings, clamps, and seals; replace clamps or seals if corroded or damaged.
• Use basic hand tools to remove and secure hose clamps; avoid twisting or kinking the hose during installation.

This rack clip is a small fastener used on GE dishwashers to secure components on the dishrack, such as adjustable tines or accessory holders. Replacing a damaged clip helps keep the rack stable and prevents parts from shifting during cycles.

• Secures rack components and attachments in position
• Helps adjustable tines or holders stay locked during loading and wash
• Replaces cracked, loose, or missing clips
• May correct issues like wobbly rack sections, parts falling off, or rattling noises

• Unplug the dishwasher or switch off the circuit breaker before servicing
• Pull the rack out for access
• Release the old clip (press/squeeze tabs), align the new clip, and snap it fully into place
• Verify the rack and attachments move smoothly and lock securely

The Third Rack Tray is an OEM part for GE dishwashers. It provides an additional level of loading space for smaller dishes and utensils above the lower racks. 

Causes of a bad third rack tray can include deformations from overloading or use of improper loading patterns. Repeated impact from loading or unloading can also cause damage over time. 

Symptoms of a bad third rack tray include:

• Difficulty sliding racks in/out or level rack operation
• Warping, bending, or blocking the functionality of upper spray arms  
• Dishes not receiving adequate wash coverage due to spacing issues
• Rattling noises or loose movement during wash cycles

This OEM GE part is compatible with Hotpoint, RCA, Asko, and some Kenmore models.