Gdt55ohsd6ss Parts

This replacement vent restores proper air flow for non-fan appliance models, helping exhaust heat and cooking odors while protecting internal components from debris. A direct-fit OEM-style vent for units that do not use a powered blower. What it does:

• Channels exhaust air and heat away from the appliance to maintain safe operating temperatures
• Helps prevent buildup of debris and grease in the vent opening
• Can reduce intermittent overheating and cooking odors caused by a damaged or missing vent
• Restores proper fit and appearance at the appliance vent outlet

• One replacement vent

• Disconnect power to the appliance before beginning any service
• Access may require removing the lower kick panel or outer cover
• Use basic hand tools; align clips or screw holes and avoid forcing the part into place

This console bracket secures the appliance control panel to the cabinet so the console stays aligned and stable during use. Replacing a worn or damaged bracket restores a snug, rattle-free control panel and proper button alignment. What it does:

• Anchors the console/control panel to the appliance cabinet to prevent movement and sagging
• Keeps switches, buttons and displays properly aligned for reliable operation
• Stops rattling, vibration noise or loose-feeling controls caused by a broken or bent bracket
• Helps maintain safe fitment so controls and wiring stay secure

• One console bracket

• Disconnect power (unplug or turn off breaker) before starting work to avoid shock
• Handle the control assembly and any attached wiring carefully to avoid damage
• Basic hand tools are typically required; keep all mounting screws and clips for reuse unless damaged

This vent (dark grey) replaces a damaged or faded exterior vent cover on compatible GE appliances, helping restore appearance and maintain proper airflow. Use it to address visible damage or improve a loose or rattling vent. What it does:

• Covers and protects an appliance vent opening while allowing airflow through the cabinet or housing.
• Helps prevent drafts and keeps debris, lint, and small pests from entering the appliance interior.
• Stops rattling or vibration caused by a cracked or loose vent cover.
• Restores the original look by replacing a faded, cracked, or broken vent piece.

• Disconnect power (and gas, if applicable) before service and work on a cool, unplugged appliance.
• Remove trim or access panels as needed; keep screws and parts organized for reassembly.
• Check fit and orientation before final fastening to ensure proper airflow and sealing.

This rail and end cap assembly replaces a worn or broken rack rail so the appliance rack glides smoothly and stays secured. It restores proper support and reduces catching, slipping, or noisy movement during use. What it does:

• Supports the appliance rack and provides a smooth sliding track.
• Replaces damaged or cracked rails and end caps that cause the rack to catch or bind.
• Helps prevent the rack from slipping off the track or dropping when extended.
• Reduces grinding, scraping, or other abnormal noises tied to worn rail components.

• Turn off power to the appliance (unplug or shut off the breaker) before starting.
• Remove the rack and align the rail with the track; snap or slide the end cap into place per the appliance's service instructions.
• Use basic hand tools if needed; avoid excessive force to prevent breakage.

Size: 8-32 t. Includes 12 screws.

This rubber grommet provides a protective seal where hoses, wires or components pass through openings, helping prevent chafing and moisture intrusion. Use it to restore a tight fit and reduce wear at the penetration point. What it does:

• Seals and cushions openings to help prevent water leaks and air gaps.
• Protects wiring and hoses from rubbing on sharp metal edges that can cause wear or shorts.
• Reduces vibration and rattling by holding parts securely in place.
• Common symptoms of failure: visible cracking, missing or torn grommet, water dripping near the opening, or rubbing noises.

• Disconnect power to the appliance and turn off water supply before beginning any repair.
• Remove the access panel or boot as needed to reach the opening; press the grommet into the hole until fully seated.
• Inspect surrounding seals, hoses and wiring; replace any damaged components to prevent repeat issues.

This SCR 8-18 silicon-controlled rectifier replaces the control semiconductor that switches and regulates power to heating or motor circuits in compatible appliances, restoring proper power delivery and control. It's a direct-fit electrical replacement part. What it does

• Acts as a switching device on control boards to allow or block current flow when signaled.
• Regulates power delivered to heating elements or motor circuits to enable proper operation.
• Commonly linked to symptoms like no heat or intermittent heating, motors that won't start, or erratic control-board behavior.
• Helps restore reliable on/off control when a failed SCR is causing open or shorted conditions.

• One SCR 8-18 silicon-controlled rectifier (WD02X10160).

• Always disconnect power before servicing the appliance to avoid shock.
• Handle the part carefully; avoid touching leads and use anti-static precautions if available.
• Inspect surrounding connectors and wiring for damage; replace any corroded terminals.

A silicon-controlled rectifier (SCR) used on appliance control boards to regulate power to motors, igniters or other loads. Replacing a faulty SCR can restore proper power switching and steady operation of the driven component. What it does:

• Acts as a power-switching semiconductor in appliance electronic control circuits to allow current flow only when triggered.
• Enables controlled delivery of voltage/current to motors, igniters and similar loads on the control board.
• A failing SCR can cause symptoms such as no power to a motor or igniter, intermittent operation, or complete failure of the driven component.
• Match the SCR package and electrical ratings to the control board before replacing.

• Disconnect all power to the appliance before accessing control electronics to avoid shock or damage.
• Take electrostatic-discharge (ESD) precautions; handle the SCR by its body and avoid touching leads.
• Package orientation and electrical ratings on the control board and wiring before installation.

This is a stainless steel hex washer-head screw used to fasten and secure components. Its integrated washer head provides a broad bearing surface for a tight, durable hold in appliance assemblies.

• Secures panels, brackets, and hardware to prevent looseness and vibration
• Restores proper fastening when originals are stripped, missing, or corroded
• Stainless construction helps resist rust in moisture-prone areas
• Common symptoms of a needed replacement include rattling, loose panels, or missing hardware

• Disconnect power and, if applicable, shut off water before servicing
• Use the correct nut driver or socket for the hex head to avoid stripping
• Replace any damaged or missing fasteners in matched pairs or sets for even clamping
• Do not overtighten; snug to manufacturer torque guidance when available

This manual floor plate is the replacement cover that mounts at the appliance base to protect internal components and provide a finished surface. It restores the dryer's base appearance and helps prevent debris from entering the cabinet. What it does:

• Covers and protects the lower cabinet opening and components from dust and lint
• Helps maintain proper clearance and a finished look at the dryer base
• Replaces damaged, bent, or missing base plates that allow debris entry
• Can reduce rattles or vibration caused by a loose or warped floor plate

• One floor plate

• Disconnect power (and gas, if applicable) before servicing to avoid shock or injury
• Remove the dryer front or lower access panel per manufacturer instructions to access mounting screws
• Use correct-size screws and tighten to manufacturer torque; avoid over-bending the plate during installation

Left side roller cover.

The User Interface Housing is an OEM replacement part for GE dishwashers. Located at the front of the console, it houses the control panel responsible for cycle/option navigation.

The housing protects sensitive electronic components from water damage and physical impact. Its sturdy construction allows for responsive touch inputs without flex or play in the assembly. 

Symptoms of a bad user interface housing include:

• Warping or cracks exposing circuitry to damage
• Faulty sealing allowing moisture penetration
• Difficulty registering button presses from structural defects
• Ill-fitting installation negatively impacting usability

Causes can be repetitive openings allowing entry of dirt/moisture into critical areas and use over the years breaking down seals and weakening materials.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This block foam door is an insulated panel that fits inside the appliance door to help reduce heat transfer and maintain consistent internal temperatures. It restores door insulation for more efficient cooling and temperature stability. What it does:

• Provides thermal insulation inside the door to reduce heat gain or loss
• Helps prevent frost buildup and cold spots by improving temperature consistency
• Supports efficient compressor cycling and can reduce energy waste when functioning properly
• Common symptom: uneven temperatures, visible condensation or frost on the door, or reduced cooling performance

• One block foam door

• Disconnect power before servicing and follow the appliance manufacturer's disassembly instructions
• May require removing the inner door liner and fasteners to access and replace the foam; keep hardware for reassembly
• Handle carefully to avoid damaging the foam or door liner; use appropriate hand protection

The Screw is an OEM part for GE dishwashers. This screw is designed for various applications, including securing and fastening components in your GE appliance.

A bad screw can result in issues such as loose or unstable components, improper functioning, or even potential damage to other parts. Causes of a bad screw can include wear and tear over time, improper installation, or exposure to extreme conditions.

Symptoms of a bad Screw include:

• Components becoming loose or detached
• Parts not securely fastened
• Unusual noises or vibrations during operation
• Visible signs of damage or wear on the screw

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

A white plastic tub trim that restores the washer's front appearance and helps seal the gap between the outer cabinet and inner tub. Replaces worn or cracked trim to improve fit and finish. What it does:

• Covers and protects the tub edge, providing a finished look around the washer opening
• Helps maintain a snug seal between the tub and cabinet trim to reduce snagging and debris buildup
• Common replacement for cracked, warped, or discolored trim that affects appearance or clearance
• Matches factory finish and mounting locations for a correct, secure fit

• One tub trim (white)

• Turn off and unplug the appliance before beginning any repair
• Removal typically requires opening the access panel or unhooking clips; handle trim gently to avoid snapping mounting tabs
• Keep mounting hardware and clips; reuse if undamaged or replace with manufacturer parts

This rail and end cap assembly secures a refrigerator shelf or door bin and restores a stable mounting surface for stored items. It replaces worn or damaged rails that allow shelves to sag or detach. What it does

• Replaces a damaged shelf rail and end cap to restore proper shelf support
• Holds the shelf/bin in position so items stay level and don't slide off
• Stops rattling or movement caused by a loose or broken rail assembly
• Fits where an original molded rail/end cap has cracked, worn, or failed

• One rail and end cap assembly as shown

• Remove food and bins from the area before starting; support the shelf while removing the old part
• Use basic hand tools; avoid forcing parts — align tabs and slide the rail into place until it snaps or seats
• Disconnect power if required by your model before working near electrical components