Gdt55ohsd6ss Parts

This silicon controlled rectifier (SCR) switches and regulates power to heating or motor circuits, helping the appliance control temperature and run cycles reliably. It's a direct-fit electronic switching component used in a variety of control systems. What it does:

• Acts as an electronic switch to regulate AC power to heating elements or motors
• Helps control temperature output and maintain consistent cycle performance
• Can prevent unwanted continuous current flow when functioning properly
• Commonly replaced when ovens, ranges, or dryers fail to heat or cycle correctly

• One silicon controlled rectifier (SCR) as shown

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Handle the SCR by its body; avoid touching terminals and static-sensitive areas
• Verify proper orientation and secure mounting; follow OEM wiring and torque practices

This door handle fastener secures a refrigerator/freezer door handle to the appliance, restoring stable grip and proper handle alignment. Small but essential for keeping the handle firmly attached during use. What it does:

• Secures the door handle to the door mounting post or bracket
• Stops handle wobble, shifting, or partial detachment under normal use
• Restores proper handle alignment for comfortable opening and closing
• Helps prevent further wear to handle mounts caused by a loose fastener

• One door handle fastener

• Typically installs from inside the handle area; handle removal may be required
• Use correct screwdriver or tool to avoid stripping the fastener head
• Work carefully around door edges and gasket to avoid damage

This silicone light pipe directs indicator and status LED light through the control panel lens, restoring clear, visible panel illumination for range/oven controls. Flexible, translucent design resists heat and repositions easily. What it does:

• Guides LED or indicator light from the circuit board to the front control panel for visible status indication.
• Restores dim, uneven, or blocked panel lighting when the original light pipe is cracked, torn, or dislodged.
• Helps maintain correct light direction and appearance without affecting the LED or electrical components.
• Simple replacement that returns proper visibility to touchpads and button indicators.

• Disconnect power to the appliance before beginning any repair to avoid shock or injury.
• Access the control panel per your model's service instructions; remove control housing or panel to reach the light pipe.
• Replace the light pipe carefully—ensure correct orientation and seating so the LED aligns with the pipe.
• If LEDs or mounting features appear damaged, inspect or replace those components as needed; do not force the part into position.

Replacement control box top that restores the protective cover for the appliance control housing, keeping wiring and electronics enclosed for a cleaner appearance and safer operation. What it does:

• Covers and protects the control housing and internal wiring from dust, spills, and accidental contact
• Helps secure control components in place and maintain the appliance's factory appearance
• Commonly replaced when the original cover is cracked, broken, missing, or shows visible damage
• Can prevent loose wiring from catching or being accidentally disturbed

• One control box top

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Remove any screws or retainers securing the existing cover and lift off the old top; keep fasteners if reinstalling
• Align the replacement top and secure with the original fasteners; ensure wiring is routed and seated before closing

This high loop drain hose creates the required elevated drain loop to help prevent dishwasher backflow and ensure proper drainage. It replaces a worn or damaged drain loop and restores correct drain routing for reliable performance. What it does:

• Forms the high loop in the dishwasher drain line to reduce risk of sink water siphoning back into the appliance
• Directs wastewater from the dishwasher into the household drain properly
• Helps avoid intermittent draining issues caused by a collapsed or split drain loop
• Fits into existing drain connections—used where an elevated drain loop is required

• Designed for in-line replacement; route the hose to create a high loop secured under the countertop or cabinet as shown in the appliance installer instructions
• Turn off power and water supply to the appliance before performing service
• Inspect clamps and fittings and replace if corroded; ensure all connections are snug but not over-tightened

The Diverter Assembly is an OEM part for GE dishwashers. It is a water flow management component that directs water via internal channels and ports to target specific spray arms and jets during various wash cycles. 

Symptoms of a faulty diverter include:

• Inconsistent or inadequate rinsing  
• Reduced cleaning power on certain sections of dishes
• Odd noises coming from inside the dishwasher 

Causes can be mineral buildup clogging water passages, worn diverter vanes, or cracks in the assembly housing allowing leakage.

Properly replacing with the authentic GE OEM part restores like-performance water distribution. With uniform coverage, all dishes receive thorough cleaning and drying. Compatible with Hotpoint, RCA, and Kenmore models.

The Fine Filter is an OEM part for GE dishwashers. Located at the bottom of the dishwasher tub, the fine filter traps small food particles and debris to prevent clogs in the wash pump and other components. It is a critical filter that helps optimize cleaning performance and protect internal mechanisms.

Symptoms of a bad fine filter include:

• Reduced or inefficient water spraying from the arms  
• Accumulation of debris inside the tub
• Foul odors emitting from the dishwasher
• Drainage or water flow issues 

Over time, particles can accumulate in the fine filter mesh causing it to become clogged. Choosing this genuine GE replacement ensures optimal filtration. It upgrades your dishwasher with a new filter to once again trap particles and keep the wash system running smoothly. This OEM GE part aligns with specifications for Crosley, KitchenAid, and select Kenmore dishwashers as well.
 

The Pulley Cable is an OEM part for GE dishwashers. As a component for proper door operation, the pulley cable works with internal springs to balance the door during opening and closing movements. 

Symptoms of a bad door pulley cable include:

• The door lacks proper closing assistance and slams shut  
• Difficulty opening or requiring extra force to move the door
• Door unable to fully latch or lock into position

Causes can be fractures in wire strands weakening cable strength over thousands of uses. Extreme bends also damage internal wiring over time. 

This OEM part is compatible with select Hotpoint, RCA, and Kenmore models, 

The Plastic Coarse Filter is an OEM replacement part for GE dishwashers. It refers to a screen fitted over the wash impeller that traps soil and food debris. Subject to constant exposure to water and detergents, plastic parts can wear down over many cycles. 

Symptoms of a bad coarse filter include:

• Clogged or blocked mesh no longer prevents large particles from entering the wash arm spray jets  
• Cracks along seams or mounting points where water can seep behind
• Brittle or broken crosspieces within the screen compromising structural integrity

Causes of failure relate to the chemical deterioration of plastic combined with physical stresses as debris repeatedly builds up and then dislodges during high-velocity rinse cycles.

This GE replacement part is also compatible with some Hotpoint and RCA models.

The Rack Roller is an OEM component compatible with GE dishwashers. Located on the rack guide rails inside the washer tub, it facilitates smooth gliding of rack shelving in and out for easy loading and unloading. 

Causes of failure can include cracked/warped rollers from years of continual movement, accumulation of debris preventing free motion, or detachment of roller heads compromising installation.

Symptoms include:

• Difficulty fully extending or retracting racks  
• Off-tracking of shelving from left to right rails
• Scratches or damage to dishware from improper rack functioning 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Black Tub Trim is an OEM part for GE dishwashers. This trim piece attaches to the inner tub and provides an attractive black accent around the wash chamber. It helps improve the aesthetic design and appearance of the dishwasher interior.

Causes of a bad tub trim can include damage from impact or exposure to moisture over time, which can lead to cracking or discoloration of the plastic. 

Symptoms of a bad tub trim include:

• Visible cracks or splits in the plastic material
• Sections of trim no longer securely attached 
• Discoloration that detracts from the look of the dishwasher interior

This authentic OEM GE replacement tub trim restores the dishwasher's appearance and design integrity. It is constructed of durable plastic designed to last through years of wash cycles.
 

The Sump Overmold and Gasket Service Kit is an OEM part for GE dishwashers. Containing both the sump overmold and new gaskets, this kit replaces critical components in the lower dishwasher tub assembly.  

Causes of a bad sump or gaskets can include deterioration of rubber materials over multiple years of use and high heat. Mineral buildup during the wash cycle may also damage sealing surfaces.

Symptoms of a bad Sump Overmold and Gasket Service Kit include:

• Leaks or water entry in the bottom of the dishwasher 
• Excess moisture inside cabinet panels
• Inefficient or incomplete drying performance 

This genuine GE part is compatible with select Hotpoint, RCA and some Kenmore models as well.

Note: This kit contains both the Circulation Pump and Drain Pump along with a harness and clamps. Due to a factory revision, the pumps are no longer offered individually.