Gdt655mj2es Parts

The Console Cover and Graphics Assembly is an OEM part for GE dishwashers. It covers the control panel and touchscreen, allowing for easy operation and monitoring of cycles. Over years of use, the console can become brittle or discolored from chemicals and temperature changes during cleaning. The screen may develop dead spots or lines interfering with input.  

Causes of a bad part include repeated heating and cooling causing materials to degrade as well as splashes of harsh detergents.

Symptoms of a bad part include:

• Cracked, faded, or peeling console material
• Unresponsive or glitchy touchscreen  
• Loose or misaligned fit that allows water intrusion

This GE replacement is also compatible with Hotpoint, RCA, and select Kenmore models.

The Console Cover Graphics Assembly is an OEM replacement part for GE dishwashers. It is responsible for covering and protecting the control panel and touchpad of the dishwasher.

Symptoms of a faulty console cover graphics assembly include:

• Cracked or damaged cover
• Faded or worn-out graphics
• Inability to read or operate the touchpad

A bad console cover graphics assembly can occur due to wear and tear over time, physical damage, or fading of the graphics. If you notice cracks, discoloration, or missing pieces on the console cover, it may be time to replace it.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Fill Funnel Cap seals the dishwasher's water inlet funnel at the rear of the tub. It creates a tight docking point for the upper rack feed tube, helping prevent leaks and maintain spray pressure for effective upper-rack cleaning.

• Seals the water inlet funnel and helps guide water into the upper wash system
• Helps maintain spray pressure to the upper rack for better cleaning results
• Reduces splashing and potential leaks at the funnel connection
• Symptoms include a cracked/missing cap, water dripping near the rear funnel, or weak cleaning on the upper rack

• Disconnect power and shut off the water supply before servicing
• Pull the upper rack forward to access the rear funnel area
• Release and remove the old cap; clean the sealing surface
• Align and snap/secure the new cap; verify the rack feed tube docks smoothly

This replacement hose feeds the Bottle Jets/Bottle Blaster feature on compatible dishwashers. It carries wash water to the jet manifold so tall, narrow items receive targeted spray and helps prevent leaks from a cracked or brittle line. What it does:

• Routes wash water to the Bottle Jets/Bottle Blaster manifold for targeted cleaning
• Maintains a sealed path so jets can spray inside bottles and other narrow containers
• Common symptoms: leaks at the hose or connections, weak/no bottle-jet spray, visible cracks, kinks, or a loose hose
• Helps restore bottle-jet performance when the original hose is damaged

• 1 hose

• Disconnect power at the breaker and shut off the water supply before servicing
• Pull the dishwasher forward and/or remove rack components as needed to access both hose ends
• Transfer/secure clamps, fully seat the hose on each barb, and route it to avoid kinks or rubbing
• Reassemble and run a short test cycle while checking all connections for leaks

The Clamp is an OEM replacement part for GE dishwashers. It holds and secures critical components such as tubing or hoses securely in place. Clamps play an important supporting role by fastening tubing and preventing kinking, both of which are essential for proper water flow and circulation within the dishwasher.

Causes of a bad clamp can include cracks, corrosion, or fatigue that causes the clamp to fail in its gripping function over time. Hoses or tubes may also wear down a clamp through constant vibration. 

Symptoms of a bad clamp include:

• Leaks from hoses, tubes or connections  
• Reduced water pressure or uneven spray patterns
• Moisture or water damage around connections
• Loose hoses that rub or chafe

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Button and Graphics Asm is an OEM replacement part for GE dishwashers. This assembly includes the distinct buttons used to select cycles and settings as well as the surrounding decorative graphics display. 

Causes of a bad button and graphics asm can include cracks, fading, or damage to the visual graphics over time. The responsive buttons may exhibit failures in electrical switching mechanisms or non-responsiveness due to normal wear.

Symptoms of a bad button and graphics asm include: 

• Illegible, fading, or damaged graphics making the control interface confusing
• Non-functional or unresponsive buttons preventing selection of desired cycles
• Detached or loose assembly potentially allowing water intrusion
• Chipped or cracked enclosure compromising the seal and integrity of the control panel

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Bottle washer clip is an OEM part for GE dishwashers. Located on the upper rack, it secures slender items like baby bottles, utensils, and cups in an upright position for optimal cleaning. 

Causes of a bad bottle washer clip include wear and tear over time which leads to cracking or breaking of the plastic. Accidental mishandling during loading could also damage it.

Symptoms include: 

• Bottles and other items falling over during the wash 
• Inability to stand items up securely
• Missing or broken plastic clips

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The GE control panel is an OEM part for GE dishwasher models. It houses the touchscreen controls, buttons and digital display used to program wash cycles, temperatures and options.

Causes of a bad control panel can include cracks, water damage or flexing of the assembly over time. Moisture is circulated throughout dishwashers and constant pressure is placed on sensitive electronic parts.

Symptoms of a failed control panel include:

• Unresponsive or non-functional buttons
• Glitches where cycles cancel mid-wash or fail to start properly
• Fault codes or error messages appearing
• Inoperable or unclear touchscreen that no longer registers inputs

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

The Float Mounting Tube O Ring is an OEM component specifically designed for GE dishwashers. This float mounting tube o-ring creates a watertight seal around a tube that helps monitor water levels using a float and switch assembly.  

Causes of a bad float mounting tube o-ring can include cracks, tears or warping that prevents proper sealing. Chemical exposure from regular dishwasher use can cause o-rings to degrade over time.

Symptoms of a bad Float Mounting Tube O Ring include:

• Water leaks in the area around the tube fitting  
• Moisture or water damage near water level monitoring components
• Irregular or improperly timed cycles from inaccurate water level readings
• Safety issues from undetected pooling or overflow of water

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Bottle Hose Cover is an OEM replacement part for GE dishwashers. It refers to the protective plastic sheath that sleeves the circulation hose carrying water between the appliance and sink. Subject to prolonged exposure to heat and chemicals, the hose cover material can degrade.

Causes of a bad bottle hose cover include:

• Brittle or cracking vinyl from chemical deterioration over time
• Loose fit or sliding off the hose allowing kinks or sharp bends to form
• Holes or gaps exposing the underlying tubing to potential punctures

Symptoms of a failed hose cover include:

• Water leaks at connections if tubing is unprotected 
• Restricted water flow due to crimped tubing from improper routing
• Unsightly tubing detracting from the overall aesthetic

This GE replacement part is also compatible with some Hotpoint and RCA models.

The Friction Washer is an OEM component specifically designed for GE dishwashers. This friction washer is a thin circular part that creates resistance through surfaces rubbing together. It is often used beneath a mounting nut to prevent components from loosening during operation.  

Symptoms of a bad friction washer include loose or separating connections where the washer is installed, such as:

• Drain pump mounting fittings that become detached    
• Water connections that leak at the threaded joints
• Door handle mounts that allow play in the mechanism

Causes of failure can be cracks, wear or deformities in the washer that reduce its friction capabilities over time. Vibrations from use may also cause premature wear.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This left-hand attachment strip secures trim and panels for a clean, finished fit on compatible GE appliances. It helps maintain proper alignment and prevents gaps that can collect dirt or allow panels to shift during use. What it does:

• Attaches and stabilizes a side trim or panel to the appliance cabinet
• Keeps door/side trim aligned to reduce rattling or shifting
• Helps maintain an even, finished appearance along the appliance edge
• Addresses symptoms like loose trim, visible gaps, or panel movement

• One left-hand attachment strip

• Remove power to the appliance (or disconnect power source) before starting work
• Use basic hand tools; avoid forcing parts to prevent breakage
• Replace with OEM-specified hardware if fasteners are missing or damaged

This dishwasher hose clamp secures internal hoses to pumps or fittings, helping prevent leaks and disconnections. Replace a weakened or damaged clamp to restore a tight, reliable seal at the connection.

• Provides clamping pressure to hold a hose on pump, sump, or drain fittings
• Helps stop water leaking at hose joints
• Resolves: loose or disconnected hoses, water under the unit/base, or poor draining from a slipped drain hose
• Replaces worn, rusted, or deformed clamps after service

• Disconnect power and turn off the water supply before servicing
• Pull the dishwasher forward as needed for access; place a towel or pan to catch residual water
• Seat the hose fully, then compress or tighten the clamp per its design; position just behind the hose barb bead
• Run a short cycle and inspect for leaks at the connection

This right-hand door hinge arm assembly supports and guides the dishwasher door as it opens and closes. Replacing a bent or worn hinge restores smooth, balanced door motion and helps prevent abrupt, uncontrolled door movement.

• Serves as the right-side pivot for the dishwasher door
• Interfaces with the door spring/link mechanism to counterbalance door weight
• Helps maintain proper door alignment and smooth opening/closing
• Common signs of wear: door drops quickly, feels heavy, binds/creaks, or sits unevenly

• Disconnect power at the breaker before servicing; wear cut-resistant gloves
• Support the door to prevent sudden drop when removing the hinge arm
• The spring/link is under tension—release and reattach carefully
• After installation, check door balance and alignment; adjust spring/link tension if applicable