Gdt655ssjss Parts

The Clamp is an OEM replacement part for GE dishwashers. It holds and secures critical components such as tubing or hoses securely in place. Clamps play an important supporting role by fastening tubing and preventing kinking, both of which are essential for proper water flow and circulation within the dishwasher.

Causes of a bad clamp can include cracks, corrosion, or fatigue that causes the clamp to fail in its gripping function over time. Hoses or tubes may also wear down a clamp through constant vibration. 

Symptoms of a bad clamp include:

• Leaks from hoses, tubes or connections  
• Reduced water pressure or uneven spray patterns
• Moisture or water damage around connections
• Loose hoses that rub or chafe

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Button and Graphics Asm is an OEM replacement part for GE dishwashers. This assembly includes the distinct buttons used to select cycles and settings as well as the surrounding decorative graphics display. 

Causes of a bad button and graphics asm can include cracks, fading, or damage to the visual graphics over time. The responsive buttons may exhibit failures in electrical switching mechanisms or non-responsiveness due to normal wear.

Symptoms of a bad button and graphics asm include: 

• Illegible, fading, or damaged graphics making the control interface confusing
• Non-functional or unresponsive buttons preventing selection of desired cycles
• Detached or loose assembly potentially allowing water intrusion
• Chipped or cracked enclosure compromising the seal and integrity of the control panel

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Bottle washer clip is an OEM part for GE dishwashers. Located on the upper rack, it secures slender items like baby bottles, utensils, and cups in an upright position for optimal cleaning. 

Causes of a bad bottle washer clip include wear and tear over time which leads to cracking or breaking of the plastic. Accidental mishandling during loading could also damage it.

Symptoms include: 

• Bottles and other items falling over during the wash 
• Inability to stand items up securely
• Missing or broken plastic clips

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Float Mounting Tube O Ring is an OEM component specifically designed for GE dishwashers. This float mounting tube o-ring creates a watertight seal around a tube that helps monitor water levels using a float and switch assembly.  

Causes of a bad float mounting tube o-ring can include cracks, tears or warping that prevents proper sealing. Chemical exposure from regular dishwasher use can cause o-rings to degrade over time.

Symptoms of a bad Float Mounting Tube O Ring include:

• Water leaks in the area around the tube fitting  
• Moisture or water damage near water level monitoring components
• Irregular or improperly timed cycles from inaccurate water level readings
• Safety issues from undetected pooling or overflow of water

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Bottle Hose Cover is an OEM replacement part for GE dishwashers. It refers to the protective plastic sheath that sleeves the circulation hose carrying water between the appliance and sink. Subject to prolonged exposure to heat and chemicals, the hose cover material can degrade.

Causes of a bad bottle hose cover include:

• Brittle or cracking vinyl from chemical deterioration over time
• Loose fit or sliding off the hose allowing kinks or sharp bends to form
• Holes or gaps exposing the underlying tubing to potential punctures

Symptoms of a failed hose cover include:

• Water leaks at connections if tubing is unprotected 
• Restricted water flow due to crimped tubing from improper routing
• Unsightly tubing detracting from the overall aesthetic

This GE replacement part is also compatible with some Hotpoint and RCA models.

The Friction Washer is an OEM component specifically designed for GE dishwashers. This friction washer is a thin circular part that creates resistance through surfaces rubbing together. It is often used beneath a mounting nut to prevent components from loosening during operation.  

Symptoms of a bad friction washer include loose or separating connections where the washer is installed, such as:

• Drain pump mounting fittings that become detached    
• Water connections that leak at the threaded joints
• Door handle mounts that allow play in the mechanism

Causes of failure can be cracks, wear or deformities in the washer that reduce its friction capabilities over time. Vibrations from use may also cause premature wear.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This left-hand attachment strip secures trim and panels for a clean, finished fit on compatible GE appliances. It helps maintain proper alignment and prevents gaps that can collect dirt or allow panels to shift during use. What it does:

• Attaches and stabilizes a side trim or panel to the appliance cabinet
• Keeps door/side trim aligned to reduce rattling or shifting
• Helps maintain an even, finished appearance along the appliance edge
• Addresses symptoms like loose trim, visible gaps, or panel movement

• One left-hand attachment strip

• Remove power to the appliance (or disconnect power source) before starting work
• Use basic hand tools; avoid forcing parts to prevent breakage
• Replace with OEM-specified hardware if fasteners are missing or damaged

This dishwasher hose clamp secures internal hoses to pumps or fittings, helping prevent leaks and disconnections. Replace a weakened or damaged clamp to restore a tight, reliable seal at the connection.

• Provides clamping pressure to hold a hose on pump, sump, or drain fittings
• Helps stop water leaking at hose joints
• Resolves: loose or disconnected hoses, water under the unit/base, or poor draining from a slipped drain hose
• Replaces worn, rusted, or deformed clamps after service

• Disconnect power and turn off the water supply before servicing
• Pull the dishwasher forward as needed for access; place a towel or pan to catch residual water
• Seat the hose fully, then compress or tighten the clamp per its design; position just behind the hose barb bead
• Run a short cycle and inspect for leaks at the connection

This right-hand door hinge arm assembly supports and guides the dishwasher door as it opens and closes. Replacing a bent or worn hinge restores smooth, balanced door motion and helps prevent abrupt, uncontrolled door movement.

• Serves as the right-side pivot for the dishwasher door
• Interfaces with the door spring/link mechanism to counterbalance door weight
• Helps maintain proper door alignment and smooth opening/closing
• Common signs of wear: door drops quickly, feels heavy, binds/creaks, or sits unevenly

• Disconnect power at the breaker before servicing; wear cut-resistant gloves
• Support the door to prevent sudden drop when removing the hinge arm
• The spring/link is under tension—release and reattach carefully
• After installation, check door balance and alignment; adjust spring/link tension if applicable

The Door Arm Hinge Assembly is an OEM component specifically designed for GE dishwashers. It is the mechanism responsible for securing the dishwasher door in place and facilitating smooth opening and closing motions. Reliable door hinges are essential for proper door alignment and a securely closed operation environment during cycles. 

Symptoms of a bad door arm hinge include:

• Squeaks or grinding noises heard from the door area
• Difficulty opening or closing the door  
• Door that does not stay securely shut
• Potential door or door frame damage from loose hinges

Replacement ensures your door operates safely and precisely as intended. Replace yours today with this genuine OEM GE part for trouble-free use.

Note: Left side

This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models.

The Sump Manifold is an OEM component specifically designed for GE dishwashers. It is located within the sump pan and functions as an integral part of the dishwasher's drainage and circulation system. The sump manifold directs water flow during draining and refilling, ensuring proper water distribution to different areas of the dishwasher for cleaning and rinsing cycles. 

Symptoms of a bad sump manifold include:

• Issues with draining and water drainage
• Leaks within the sump pan area 
• Reduced or uneven water pressure during wash cycles
• Improper filling or distribution of water

Over time, components inside the sump manifold can break down or become clogged due to mineral buildup or leftover food particles. Regular maintenance is recommended to keep the sump manifold functioning optimally. 

This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models.

The Harness Assembly is an OEM part for GE dishwashers. It is a comprehensive wiring kit that includes all of the necessary electrical cables and connectors to power the control board and various components within the dishwasher. The harness assembly ensures that power and signals are transmitted correctly throughout the dishwasher, facilitating its operation.

Symptoms of a bad harness assembly include: 

• Lights, motors, or other components not functioning
• The control board receiving incorrect or inconsistent signals
• Intermittent or unpredictable dishwasher behavior

Causes of a bad harness assembly can be damage to the wires from abrasion, cuts, loose connections, or short-circuiting over time. Proper replacement of the harness assembly is necessary to restore full electrical performance to the dishwasher. 

This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models. Replacing with a new OEM harness assembly can help avoid potential electrical issues down the line.

The Pan Leak is an OEM part for GE dishwashers. It is a machined pan located at the bottom of the tub that collects any residual water after a wash cycle finishes. 

Symptoms of a faulty leak pan include: 

• Puddles or residual water remaining in the bottom of the tub after a cycle
• Water not properly draining from the bottom tub area
• Potential for water damage issues if left unaddressed

Causes can be cracks in the molded pan housing, mineral deposits clogging the drainage channels, or warping preventing a proper seal.

Replacing with this authentic GE OEM part restores the tub's intended draining and drying functionality. It is compatible with Hotpoint, RCA, and Kenmore models as well to help prevent future water problems underneath the dishwasher.

This control board clip secures the dishwasher's electronic control board to its mounting location, keeping it properly seated during operation. Replacing a damaged or missing clip helps prevent vibration, movement, and wire-connector strain.

• Holds the electronic control board firmly in its designated mount or housing
• Helps prevent board movement, rattling, and connector stress from vibration
• Replace if the clip is cracked, deformed, or missing
• Symptoms include a loose control assembly, rattling noises, or a board that won't stay seated

• Disconnect power at the breaker before servicing
• Access the control area; support the board when removing/installing the clip
• Handle the control board by the edges and observe ESD precautions
• Ensure the new clip is fully seated and the board is secure before reassembly

This dielectric shield is a small heat-resistant insulator that protects ignition wiring and components from heat and prevents electrical arcing near burners. It helps maintain reliable spark ignition and reduces risk of shorts or damage from high temperatures. What it does:

• Shields spark module wires and electrode areas from direct heat exposure
• Helps prevent arcing and electrical shorts that can interrupt ignition
• Reduces risk of melted or damaged wire insulation near burners or ovens
• Commonly replaced when cracked, deformed, or showing burn marks that affect ignition

• Disconnect power (and gas if applicable) before servicing electrical or ignition components
• Inspect surrounding wiring and connectors; replace any damaged insulation or terminals
• Reinstall using original mounting hardware and ensure the shield fully covers the wire/electrode area