Gdt6955ssj0ss Parts

This tub-mount gasket seals and cushions the washer tub where it mounts to the cabinet, helping prevent leaks and reducing vibration for quieter operation. It restores a proper seal to keep water contained inside the washer tub. What it does

• Creates a water-tight seal at the tub mounting point to help stop leaks.
• Cushions the tub and reduces noise and vibration during spin cycles.
• Helps maintain proper alignment between the tub and cabinet.
• Use when you see water pooling near the base, leaks from the tub area, or increased vibration/noise.

• Disconnect power and water supply before starting any repair.
• Drain the washer and remove panels as required for access.
• Inspect the mounting surface for damage or debris; clean before installing the new gasket for a proper seal.
• After installation, run a short cycle to check for leaks and proper operation.

This upper rack is a direct-fit replacement that restores the top-level dish storage area and allows safe, secure loading of cups, glasses and small bowls. It brings back proper rack support and organization for everyday dishwasher use. What it does:

• Supports cups, glasses and small dishes on the top rack to improve loading capacity and wash coverage
• Restores smooth sliding and proper alignment of the upper rack assembly
• Helps prevent items from tipping or blocking spray arms when the rack is installed correctly
• Addresses common symptoms like sagging, broken rack supports or bent rails that interfere with rack movement

• 1 upper rack

• Disconnect power and water to the dishwasher before servicing
• Remove the old rack by sliding it out and detaching any end caps or stops; install the replacement by aligning and sliding onto the existing track/rollers
• Keep all original rollers, end caps and supports; replace damaged hardware as needed
• After installation, run an empty quick wash to ensure proper fit and smooth operation

This front tub spacer cushions and positions the washer tub to reduce vibration and keep the inner and outer tubs properly aligned during operation. It helps maintain smooth spin cycles and prevents metal-to-metal contact. What it does:

• Centers and supports the front of the washer tub to maintain proper drum alignment
• Absorbs movement to reduce vibration and noise during spin
• Prevents rubbing or contact between the tub and cabinet components
• Can be associated with symptoms like excessive vibration, rubbing sounds, or off-center spins

• Designed for direct replacement; inspect surrounding seals and mounts during service
• Use basic hand tools; follow the washer's service manual for safe disassembly and reassembly
• Disconnect power and water supply before beginning any repair

This Button and Graphic Assembly replaces a worn or damaged control-panel button and its printed overlay so controls are readable and easy to press. It restores the button surface and visible markings for normal user operation. What it does:

• Replaces a single control-panel button and the printed graphic/overlay
• Restores legible markings and tactile button feel
• Helps resolve faded, scratched, or peeling button graphics
• Addresses buttons that stick or feel unresponsive due to worn front-surface parts

• Disconnect the appliance from power before servicing to avoid shock
• Remove any required trim or fascia carefully to access the button assembly
• Align the new assembly and press or secure per the original mounting—do not force

This button and graphic assembly replaces a worn or damaged control panel button and its overlay graphic to restore clear tactile feedback and readable markings for cycle selection and settings. It fits into the appliance's console for direct user control. What it does:

• Replaces a damaged or faded control panel button and the printed graphic overlay
• Restores readable labels for accurate selection of cycles and options
• Helps resolve issues where a button is loose, missing, or visually worn
• Works with the console's existing switch contacts to transmit user commands

• One button and graphic assembly as shown

• Remove power to the appliance before attempting any service
• Installation typically requires removing the console trim to access the button assembly
• Handle the graphic overlay carefully to avoid creasing or smudging printed markings
• If you encounter damaged mounting clips or internal switches, replace those parts as needed

This 10-18 x 5/8 screw secures panels and components on compatible appliances, restoring proper fit and preventing rattles or loose parts. It's a direct-fit fastener used where the OEM called for a #10-18 thread, 5/8" length screw. What it does

• Fastens trim, panels, brackets, and internal components to restore secure fit
• Stops vibration-related rattling or shifting caused by missing or loose screws
• Matches OEM thread and length to ensure proper engagement and alignment
• Used wherever a #10-18 x 5/8 machine/tap screw is specified in the parts list

• One screw (10-18 x 5/8)

• Disconnect power before working on the appliance and follow all safety precautions
• Use the correct screwdriver or bit to avoid stripping the head
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten
• Replace any stripped or damaged mating threads or hardware for a secure repair

A replacement rack cover handle for the dishwasher upper rack that restores a secure grip and smooth rack operation. Replaces a cracked, broken or missing handle so you can load and unload dishes more easily. What it does

• Attaches to the front of the upper rack to provide a handle for pulling the rack in and out.
• Restores proper alignment and prevents the rack cover from snagging when loading dishes.
• Replaces a handle that is cracked, loose, or broken and reduces the risk of cuts from sharp plastic edges.
• Helps maintain normal rack movement and prevents accidental rack drops.

• One rack cover handle.

• Disconnect power to the dishwasher before servicing to avoid electrical hazard.
• Empty the rack and remove any clips or stops as needed to access the handle mounting points.
• Requires basic hand tools (screwdriver or nut driver) to remove and install fasteners; keep track of any small clips or screws.
• Test rack movement after installation and do not overtighten fasteners to avoid cracking the replacement part.