Ge Cgs990setss Parts

A small metal lock washer that secures fasteners and helps prevent nuts or bolts from loosening under vibration. Fits specific GE appliances where a locking washer is required to keep assemblies tight and stable. What it does:

• Provides a locking grip under a nut or head of a bolt to resist loosening from vibration
• Helps maintain secure connections on panels, brackets, or components
• Can stop intermittent rattling or movement caused by a loose fastener
• Used wherever the original equipment calls for a retaining/lock washer

• One lock washer as shown

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use appropriate tools (needle-nose pliers or small wrench) and replace only in the original orientation
• Do not over-tighten fasteners — tighten just enough to compress the washer and engage locking feature
• Keep small parts away from children and pets

The Bake Burner is an OEM component designed specifically for GE gas ranges featuring lower oven capabilities. Located beneath the lower cavity, this burner provides even flame spread to achieve precise baking results.

Causes of issues often relate to gradual corrosion or blockages within the burner ports from repeated high-temperature exposures. 

Symptoms include:

• Irregular or inefficient lower oven heating 
• Uneven browning or incomplete cooking of baked goods
• Smaller than normal flame appearance during use

This genuine GE bake burner is compatible with Hotpoint and select RCA models as well.

This cast side grate provides a sturdy, heat-resistant cooking surface for a gas range burner, helping support cookware and maintain proper flame contact for even cooking. Ideal when an original grate is cracked, warped, or missing. What it does:

• Replaces a damaged or missing side grate to restore proper cookware support and burner clearance
• Maintains correct distance between cookware and flame for consistent heating
• Resists high heat and surface wear typical of everyday stovetop use
• Helps prevent pans from tipping or sliding on the cooktop

• Install on a cooled, unlit cooktop; ensure the grate sits flat and stable over the burner
• No special tools required; lift out the old grate and position the replacement
• Verify burner head components are correctly seated before use
• If burner operation or flame shape changes after installation, turn off the appliance and inspect

A small rubber bumper that cushions contact points to reduce noise and prevent wear on moving appliance parts. Fits where a soft stop or spacer is needed to protect surfaces and quiet door or panel movement. What it does:

• Acts as a shock absorber to cushion impact between moving parts or panels
• Reduces rattling and vibration for quieter operation
• Prevents metal-to-metal contact that can cause surface wear or chipping
• Maintains proper spacing where a soft stop or spacer is required

• Typically presses or snaps into a mounting hole or onto a stud; orientation before installing
• Clean mating surfaces to ensure a secure fit and proper adhesion if applicable
• Replace only when the old bumper is cracked, flattened, or missing
• Disconnect power and remove any obstructing panels if working near electrical components

The Blower Motor is an OEM part for GE ranges. Within the oven cavity, it circulates air to help distribute heat evenly for thorough cooking.

Causes of a bad Blower Motor include wear from long term use, residue buildup on fan blades inhibiting air movement, or electrical issues such as loose wiring connections or a burned out motor coil.

Symptoms of a bad Blower Motor are:

• Inconsistent or improper baking and broiling
• Hot and cold spots inside the oven cavity
• Extended cooking times needed for foods

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This cable clamp secures the appliance power cord where it enters the cabinet, protecting wiring from pull and chafe for safer, more reliable operation. Designed to hold the cord firmly in place and prevent accidental disconnection. What it does:

• Acts as a strain relief to prevent the power cord from pulling into or away from the appliance
• Protects wiring from abrasion and sharp edges at the entry point
• Helps maintain a secure electrical connection to reduce intermittent power issues
• Commonly used where the cord passes through a rear or bottom access panel

• Disconnect power before inspecting or replacing the clamp to avoid shock or injury
• Install at the cord entry so the clamp captures the cord jacket; tighten fastener securely but do not over-torque
• Verify the cord is correctly routed and not pinched when reassembling panels
• If any wiring or the cord jacket is damaged, replace the cord before restoring power

The Pressure Regulator is an OEM component designed specifically for GE gas ranges. Located outside the range near the supply line, this regulator controls incoming gas pressure to safe operation levels. 

Symptoms of a faulty regulator include:

• Unstable burner flame heights   
• Delayed or inconsistent ignition between burners
• Abnormal operating noises coming from the regulator

Causes usually involve wear of internal springs or diaphragms from years of sustained usage. Exposure to excessive pressure surges could also potentially damage regulator components over time.

This genuine GE regulator is compatible with select Hotpoint and RCA models as well.

This oven light gasket fits between the glass lens and the oven liner. It restores a proper seal around the light opening to help keep grease and moisture out of the light cavity and hold the lens securely in place. What it does:

• Seals the joint between the oven light lens and the cavity wall
• Helps prevent grease and moisture from entering the light assembly
• Keeps the lens snug to reduce looseness or rattling
• Replace if the gasket is cracked, flattened, brittle, missing, or if moisture/grease is visible around the lens

• One oven light lens gasket

• Disconnect power at the breaker and allow the oven to cool completely
• Remove the light lens/retainer as your model requires (unscrew lens or release clips)
• Note gasket orientation and clean the mating surfaces
• Seat the new gasket evenly and reinstall the lens; do not overtighten the glass

The Knob Assembly is an OEM component for GE gas ranges. These knobs are turned to adjust oven or cooktop burner settings. 

Symptoms of a bad knob assembly include:

• Loose, gritty, or difficult movement when adjusting the temperature 
• Faded, cracked or peeling of installed knob surfaces
• Knobs no longer stay securely in position 

Causes of bad knob assemblies include wear over many cooking cycles that degrade plastic and rubber materials. Heat, grease exposure, and cleaning chemicals also corrode superficial finishes.

This part is also compatible with some Hotpoint and RCA gas range models.

This dual water inlet valve controls water flow to the refrigerator's dispenser and ice maker, restoring normal water delivery when the original valve fails. Reliable replacement for disrupted water supply or intermittent dispensing. What it does:

• Directs water to the icemaker and dispenser via two separate inlet ports/solenoids
• Stops water flow when valves fail, causing no water or no ice production
• Can cause continuous water flow or leaks if a valve sticks
• Restores normal dispensing and ice-making when replaced

• Disconnect power and shut off the water supply before starting any repair
• Replace with matching orientation and secure mounting to avoid kinks in supply lines
• Verify connections and test for leaks after restoring power and water

This 1/4-20 screw secures panels, brackets, and other assemblies in your appliance. It restores a tight, reliable hold when an original fastener is missing, stripped, or corroded.

• Fastens components that require a 1/4-20 threaded screw
• Helps keep panels and assemblies aligned and rattle-free
• Direct replacement for worn, rusted, or lost hardware
• Common symptoms: loose or vibrating parts, misaligned brackets, missing fastener

• Disconnect power; turn off gas supply before servicing
• Allow the appliance to cool; wear gloves and eye protection
• Start threads by hand to avoid cross-threading; use the correct driver/tool
• Tighten snugly—do not overtighten to prevent stripping or damage

This knob assembly is a direct-replacement control knob for appliance cooktop/oven controls, restoring a secure grip and reliable control operation. It replaces worn, broken or missing control knobs so you can set temperatures and burners with confidence. What it does:

• Replaces a damaged or missing control knob so you can operate the control shaft properly
• Provides a firm, easy-to-turn grip to improve control accuracy
• Helps prevent slipping or intermittent contact that can cause inconsistent settings
• Restores the original look and function of the control panel

• One knob assembly

• Disconnect power to the appliance (and shut off the gas supply for gas appliances) before starting
• Pull the old knob straight off the control shaft; align and push the new knob onto the shaft until fully seated
• If the knob has a position marker, verify proper orientation before use
• If the knob does not fit or operate smoothly, stop and confirm the part number and shaft type.