Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Ge Gsd2001j01ww Parts

Float Switch (Drain-Pan Sensor)
Genuine Ge part
By: Ge
Part Number: WD21X479

This float switch detects rising water in the refrigerator drain pan or lower cabinet area and signals the appliance control to help prevent overflow and water damage. Use it to replace a failed or intermittent water-level sensor. What it does:

  • Senses high water level in the drain pan or collection area and closes the circuit to alert the control.
  • Helps identify causes of leaks and pooling under or behind the appliance.
  • Commonly used when symptoms include water on the floor, drip pan overflow, or water-related error/alert conditions.
  • Matches OEM function for refrigeration units that include a float-based water-detection circuit.
What's included: One float switch. Install notes:
  • Disconnect power to the appliance before starting any repairs; shut off the water supply if working near water lines.
  • Access may require removing lower kick plate or back panel; handle plastic clips and fasteners carefully.
  • Disconnect electrical connector gently and note orientation before installing the replacement; secure wiring and verify float moves freely.
  • Restore power and run a short test cycle or simulate water level to ensure proper operation.

Do-It-Yourself Stories from Customers like You The dish washer was not fill with water   Stanley B. • Newberry Springs , CA • December 14, 2014

1. Removed the water inlet/shut off valve, removed and cleaned the screen. while the valve was removed applied electrical power to the valve and it worked just fine. 2. replaced the broken float switch. Read more

More
$20.38

IN STOCK
Ships Today Guaranteed
Add to Cart
Float Stem (Water Level)
Genuine Ge part
By: Ge
Part Number: WD12X335

This float stem is part of the dishwasher's water-level/overfill system. It guides the tub float and actuates the float switch so the unit fills correctly and shuts off on time. Replace a worn or broken stem to restore reliable fill protection.

  • Connects the float to the switch mechanism beneath the tub
  • Provides smooth vertical travel of the float through the opening
  • Triggers the float switch to stop filling at the proper level
  • Causes symptoms such as no fill, continuous filling/overfilling, a stuck or wobbly float, or intermittent fill issues
What's included: 1 float stem Install notes:
  • Disconnect power at the breaker and shut off the water supply before servicing
  • Remove the lower rack; lift off the float cap from inside the tub
  • On some models, release the retainer/clip from beneath the tub; pull out the old stem
  • Guide the new stem through the opening and ensure it engages the float switch lever; confirm the float moves freely and actuates the switch before restoring power

Do-It-Yourself Stories from Customers like You 1 not draining properly 2 not cleaning properly 3 not filling properly 4 not running properly 5 sump and sump cap was filthy 6   James W. • San Diego , CA • March 19, 2017

1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve. Parts $220 for Dishwasher Estimated Labor $400.00 Labor $0.00 Parts $100.00 for Pullout Faucet Estimated Labor $175.00 Labor $0.00 Read more

More
$25.57

IN STOCK
Ships Today Guaranteed
Add to Cart
Dishwasher Sump Clamp
Genuine Ge part
By: Ge
Part Number: WD1X1392

Secures dishwasher sump to tub, maintaining seal compression to prevent leaks. Replace if corroded or weak. Confirm fit with your model number.

Do-It-Yourself Stories from Customers like You Leaking pump connector.   David M. • Ypsilanti , MI • October 13, 2018

Took the impeller out, removed the pump, replaced connector, put new clamps on, reassembled and checked for leaks. I just followed Arts video, went smooth. Wifes happy, things are good. Thanks AppliancePartsPros.com Read more

More
$15.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Dishwasher Inner Door Panel
Genuine Ge part
By: Ge
Part Number: WD31X10004

Replaces the interior face of your dishwasher door. Ideal when the door liner is cracked, dented, melted, or visibly worn. Restores a clean surface.

Do-It-Yourself Stories from Customers like You Rinse aid dispenser didn't work and soap dispenser door would not close ge dishwasher   Jerry C. • Lily , KY • March 18, 2017

Replaced the inner door panel and rinse aid tank. The videos from AppliancePartsPros.com were very helpful. Everything works as designed now. Read more

More
$290.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Dishwasher Mounting Bracket Kit
Genuine Ge part
By: Ge
Part Number: WD35X200

Secures dishwasher cabinet to chassis for improved stability. Replace if original brackets are broken, missing, or causing movement and panel gaps.

Do-It-Yourself Stories from Customers like You The whirlpool refrigerator kept leaking water into the icemaker and it would freeze everything   Anthony W. • Lancaster , CA • December 07, 2015

I changed the water valve assembly and we have not had a problem since. Read more

More
$13.44

IN STOCK
Ships Today Guaranteed
Add to Cart
Dishwasher Mounting Screw
Genuine Ge part
By: Ge
Part Number: WD02X10106

Replacement mounting screw for dishwasher door panels, control assemblies, and internal components. Needed when original screws are stripped, rusted, or missing.

Do-It-Yourself Stories from Customers like You Keypad on dishwasher would not work   Karen S. • Fairfax , VA • September 29, 2014

Ordered new GE part through AppliancePartsPros.com. Looked on Youtube for some assistance in how to replace part. This entailed removed outer door cover and removing old touch pad strip. We were surprised how easy this was to do! Time involved less than 20 minutes! Works perfect now. This is an A+ company to order parts from, and their website is so easy to navigate. I ordered the part and it was at my doorstep in two days, packaged extremely secure to protect the genuine GE part. I... Read more

More
$9.24

IN STOCK
Ships Today Guaranteed
Add to Cart
Dishwasher Hex Washer Head Screw
Genuine Ge part
By: Ge
Part Number: WD02X10126

Hex washer head screw secures panels, brackets, and internal components in dishwashers. Replace stripped, rusty, or missing fasteners to restore fit.

Do-It-Yourself Stories from Customers like You Missing access and toe kick panel.   George H. • San Diego , CA • August 10, 2019

Don't ask me how in a rental, that the renters would take a Access and Toe Kick Panel. Luckily for me AppliancePartsPros.com had the parts I needed to replace them. The price was good and the speed of the delivery was very quick. Read more

More
$9.24

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Ge part
By: Ge
Part Number: WD2X425

Size: 10-12 x 1/2 inch.

More
$9.24

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Ge part
By: Ge
Part Number: WD02X10104

The GE screw is an OEM replacement part responsible for securing various components and parts of the dishwasher together. The screw is designed to provide a tight and secure connection for different panels, brackets, or other elements within the dishwasher. It plays a crucial role in maintaining the structural integrity of the appliance by preventing loose parts.

Common causes of a bad screw can include regular wear and tear from frequent use, exposure to moisture leading to corrosion, or damage from over-tightening. A compromised screw can result in loose or unstable components, which can affect the dishwasher's performance and safety.

Symptoms of a bad screw include:

  • Loose or wobbly components within the dishwasher
  • Difficulty in securing parts properly
  • Visible rust or corrosion on the screw
  • The screw head being stripped or damaged

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Had a leak around the vent cover   Richard M. • Albuquerque , NM • January 10, 2016

The 4 screws that hold the vent cover in place also hold the assembly inside the door that has the heater motor and other items. The four screws go through the assembly inside the door, through the door and into 4 plastic legs on the vent cover. Two of the legs on the vent cover were broken and therefore the vent cover and the assembly inside the door were not being held tight against the door. The water was leaking in that area. Read more

More
$14.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Dishwasher Float Dome
Genuine Ge part
By: Ge
Part Number: WD12X445

Fix dishwasher overfilling or not filling properly with a new float dome. Protects the float sensor for accurate water level control. Easy 15-minute repair.

Do-It-Yourself Stories from Customers like You 1 not draining properly 2 not cleaning properly 3 not filling properly 4 not running properly 5 sump and sump cap was filthy 6   James W. • San Diego , CA • March 19, 2017

1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve. Parts $220 for Dishwasher Estimated Labor $400.00 Labor $0.00 Parts $100.00 for Pullout Faucet Estimated Labor $175.00 Labor $0.00 Read more

More
$15.52

IN STOCK
Ships Today Guaranteed
Add to Cart
Dishwasher Door Latch Strike
Genuine Ge part
By: Ge
Part Number: WD13X67

Door won't close or latch properly? This latch keeper secures the door strike so your dishwasher stays closed during cycles. Quick DIY repair.

More
$10.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Dishwasher Junction Box Cover
Genuine Ge part
By: Ge
Part Number: WD12X448

Covers the electrical junction box where the power cord enters your dishwasher. Replace if cracked, broken, or missing to protect wiring connections.

Do-It-Yourself Stories from Customers like You Missing electrical cover and cord,   Bruce S. • Egg Harbor Township , NJ • August 01, 2020

Used your parts. Worked great. Read more

More
$12.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Clamp (Hose/Wire Retaining), 1 Each
Genuine Ge part
By: Ge
Part Number: WD1X1376

A replacement clamp that secures hoses or wiring to keep lines routed and stable, helping prevent rubbing, leaks and noise. Restores a reliable hold for tubing and harnesses so the appliance runs quietly and safely. What it does:

  • Holds hoses, tubing or wire harnesses in place to reduce movement and chafing.
  • Helps prevent leaks and water line abrasion caused by loose fittings.
  • Reduces rattling or vibration from unsecured lines or cables.
  • Keeps routing organized so adjacent components aren't stressed or worn.
What's included: One clamp. Install notes:
  • Disconnect power before servicing the appliance; shut off water supply when working on water or drain lines.
  • Remove the old clamp and position the replacement so it fully engages the hose or harness, avoiding twists.
  • Use appropriate hand tools (pliers or screwdriver) and secure the clamp evenly; avoid overtightening.
  • Inspect surrounding hoses and wiring for damage while installing; replace any components that show wear.

Do-It-Yourself Stories from Customers like You Multiply holes in pump connector   Richard H. • Highland , NY • October 31, 2014

Replaced connector. The job took about 1 hour, most of which was spent getting the machine out from under the counter. Replacing the actual part did not take long at all. Read more

More
$21.50

IN STOCK
Ships Today Guaranteed
Add to Cart
Front Panel - Long
Genuine Ge part
By: Ge
Part Number: WD31X10025

Color: White.

Do-It-Yourself Stories from Customers like You My dishwasher did not match other appliances in new home   Judith O. • Montgomery , AL • August 06, 2016

I ordered both the front long panel and the lower access panel in the new color. I watched the instructional videos which were very helpful. I was very careful to remember where all the screws belonged as I took it apart. The panel required an extra small attachment to fit due to a change in design. These were included in the box along with clear instructions. It took about an hour to put back together, but I encountered no problems. The dishwasher now looks great. If I had not found this... Read more

More
$73.76

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Ge part
By: Ge
Part Number: WZ5X219D

Includes 12 screws.

More
$32.47

IN STOCK
Ships Today Guaranteed
Add to Cart
Dishwasher Fill Hose
Genuine Ge part
By: Ge
Part Number: WD18X202

Routes water from inlet valve to tub. Replace if cracked, leaking at connections, or worn from age. Installs between valve and tub exterior connection point.

Do-It-Yourself Stories from Customers like You Dishwasher was making loud noises from the bottom when running   Alan R. • Rochester , NY • June 30, 2018

I replaced the pump and motor assembly. I also proactively replaced the fill hose while I had the dishwasher out since it was decades old. GE now only sells a generic kit. There were about 7 different sets of directions for different groups of models, and myriad adapters and other parts to support all of them. I wish GE had provided a way of looking up which instructions to use based on model # as that would have saved me a lot of trouble sorting out the instructions, but I didn't find one.... Read more

More
$20.38

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google