Ge Harmony Parts

Duct assembly that channels hot air from the dryer drum to the exhaust vent. Replace if cracked, disconnected, or showing heat damage or wear.

This hot-surface oven igniter glows to ignite the gas burner, restoring reliable heat in gas ovens and ranges. Use it when a weak or failed igniter prevents the oven from reaching temperature or lighting consistently. What it does

• Heats to a high temperature to open the oven's gas valve and ignite the burner
• Replaces a cracked, brittle, or underperforming igniter that won't glow reliably
• Common symptoms: oven won't heat, long or no preheat, burner fails to light
• Matches OEM form and function for a direct replacement

• Disconnect electrical power and shut off the gas supply before servicing
• Handle the ceramic/glass element carefully; do not touch the glowing surface with bare hands
• Verify the part number on the old igniter before ordering and test for glow before reassembling

Washer not heating or cooling properly? This thermistor temperature sensor assembly measures internal temps and sends readings to the control board.

This motor assembly kit replaces the dryer's drive motor so the drum turns smoothly and reliably. Restores normal tumbling and helps stop motor noise or a drum that won't rotate. What it does:

• Powers the dryer drum so clothes tumble during operation
• Replaces worn or seized motors that cause the drum to stop turning
• Stops loud grinding, squealing, or humming noises from the motor area
• Helps eliminate intermittent starting or unresponsive drum rotation

• Disconnect power before beginning any repair to avoid shock or injury
• Basic installation involves removing the dryer front or rear panel, disconnecting wiring harnesses, and replacing the motor assembly
• Check belts, idler pulley, and drum support rollers while servicing; replace if worn

Replacement nut for dryer assembly. Secures components and panels throughout your dryer. Order a new nut if the original is stripped, missing, or damaged.

Dryer won't heat or overheats? This thermostat assembly regulates temperature to prevent damage. Moderate DIY repair taking 30-45 minutes.

Dryer not heating or overheating? This thermostat assembly regulates temperature to ensure proper drying. Moderate difficulty repair, typically 30-45 minutes.

Dryer not heating or shutting off early? This thermostat assembly regulates temperature to prevent overheating. Easy DIY repair in under an hour.

This door release cable connects the dryer door latch to the release mechanism so the door opens and closes reliably. Replaces a worn or broken cable to restore normal door operation and improve safety. What it does:

• Transfers motion from the door handle to the latch so the door can be opened and closed
• Helps ensure the door stays securely closed during operation
• Commonly replaced when the door won't latch or handle feels loose
• Prevents intermittent door-release failures that can stop dryer cycles

• Disconnect power before beginning any repair to avoid shock or injury
• Inspect the latch, handle, and routing path and replace any damaged clips or fasteners
• Basic hand tools typically required; follow OEM instructions for routing and attachment

Wire harness assembly for dryers. Connects electrical components inside the cabinet. Replace if wires are damaged, frayed, or connectors are broken.

A lower-rack lifter that secures and guides the dishwasher's bottom rack for smooth movement and correct positioning. Restores proper rack height and alignment so dishes load, wash, and drain without interference. What it does:

• Supports and raises/lowers the lower dish rack to the correct operating position
• Keeps the rack aligned on its track to prevent binding or rough movement
• Reduces rack rubbing against tub walls and helps ensure proper spray-arm clearance
• Commonly replaced when the rack drops, won't stay level, or moves unevenly

• Disconnect power and turn off water supply before servicing dishwasher
• Remove lower rack to access and replace the lifter; no special tools typically required
• Verify proper seating on the rack guide and smooth operation before returning unit to service
• If other rack components are damaged, inspect for worn wheels or track issues

Secures washer hoses to prevent leaks. Replace if loose, cracked, or causing water seepage. Verify fit with your washer's model number before ordering.

Leveling leg assembly with cap for washers. Installs at the base to support and level your appliance. Replace if cracked, broken, or missing threads.

Replace a malfunctioning washer control board if your washer won't start, displays error codes, or cycles aren't working. Fixes electronic control issues.