Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Ge Pdw7880j01ss Parts

Comb Retainer
Genuine Ge part
By: Ge
Part Number: WD12X10064

Color: white. Measures about 1 inch wide by 1-1/2 inches deep.

Do-It-Yourself Stories from Customers like You Dishwasher retainer clips broke   Ken J. • Sammamish , WA • April 05, 2015

Replaced retainer clips. Read more

More
Bracket, Rinse Module (Mounting Bracket)
Genuine Ge part
By: Ge
Part Number: WD12X10146

This mounting bracket secures the dishwasher rinse module/dispenser assembly so the dispenser stays properly positioned for reliable rinse-aid delivery. A correctly seated bracket helps prevent dispenser misalignment and related rinse-aid issues. What it does:

  • Holds the rinse module/dispenser firmly in place inside the dishwasher tub or door
  • Keeps the dispenser aligned so rinse aid can be released as designed
  • Helps prevent dispenser rattling, shifting, or partial seating during cycles
  • Can reduce symptoms like poor rinsing, visible spots, or uneven rinse-aid release
What's included: One mounting bracket for the rinse module/dispenser. Install notes:
  • Disconnect power to the appliance before starting any work for safety
  • Basic hand tools (screwdriver, nut driver) are typically needed; follow OEM instructions
  • Align the bracket and secure fasteners without over-tightening to avoid damage

Do-It-Yourself Stories from Customers like You Soap suds left in tub after rinse cycle   John O. • White Plains , NY • May 20, 2017

Rinse aid was not dispensing properly. so replacing the dispenser fixed the problem. Very easy to do with the replacement part, although the repair video was not exactly accurate; it was actually easier. Remove the screws holding the door liner and lift it off, and the part is right in front of you. 6 screws off, remember what color wire goes where, reassemble, and you're done. Problem gone. As usual, Appliance Parts Pros is the absolute best source. Read more

More
Bracket And Roller Asm
Genuine Ge part
By: Ge
Part Number: WD12X10149

 

More
Bracket And Roller Asm
Genuine Ge part
By: Ge
Part Number: WD12X10334

 

More
Pulley Bracket Asm
Genuine Ge part
By: Ge
Part Number: WD16X10009

 

More
Pump Seal And Impeller Kit
Genuine Ge part
By: Ge
Part Number: WD19X10032

This kit is used to repair a leaking pump on GE made dishwashers. For a complete pump/motor assembly get WD26X10013.

Do-It-Yourself Stories from Customers like You Leaking water onto the floor   John G. • Canmer , KY • May 28, 2015

The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more

More
Module Control Asm
Genuine Ge part
By: Ge
Part Number: WD21X10215

 

Do-It-Yourself Stories from Customers like You Drying cycle was not working   Stanley D. • Woburn , MA • March 17, 2014

After I looked into what the possibilities might be, it pointed to the control module. The part arrived in just 2 days, and the installation took approximately 30 minutes. Once installed I ran the dishwasher through a complete wash and dry cycle. The dishwasher now works like new. Thank You for you prompt service. Stan Davis Read more

More
Module 3 Digit Displa
Genuine Ge part
By: Ge
Part Number: WD21X10260

 

More
Coarse Filter
Genuine Ge part
By: Ge
Part Number: WD22X10029

 

Do-It-Yourself Stories from Customers like You Bottom coarse filter curled up in corners letting debris get through and clog the wash arms   Caroline F. • Oregon City , OR • August 22, 2016

I ordered a bottom coarse filter, which was easy to order through Appliance Parts Pros, received it sooner than expected, watch a u tube video on how to replace it and my dishwasher is running well. Read more

More
Tube Drain Asm
Genuine Ge part
By: Ge
Part Number: WD24X10020

 

More
Hose Fill
Genuine Ge part
By: Ge
Part Number: WD24X10026

 

Do-It-Yourself Stories from Customers like You The water inlet valve leaked and caused floor damage   Nicholas C. • Granby , CT • August 22, 2016

Looked at your diagram and located the part replaced hose and clamps as a precaution Read more

More
Brace Toekick
Genuine Ge part
By: Ge
Part Number: WD27X10233

 

More
Basket Small Items Assembly
Genuine Ge part
By: Ge
Part Number: WD28X10002

 

More
Silverware Basket
Genuine Ge part
By: Ge
Part Number: WD28X10037

Color: white. Measures about 3 inches wide by 6 inches high by 10 inches deep.

Do-It-Yourself Stories from Customers like You Hole in my silverware basket.   Lynn L. • Mount Airy , MD • May 05, 2020

Found the replacement part and switched it out for the damaged part Read more

More
Comb Upper Rack Asm
Genuine Ge part
By: Ge
Part Number: WD28X10061

 

More
Dishwasher Tine Clip Nylon
Genuine Ge part
By: Ge
Part Number: WD28X10063

This nylon clip secures the tines on your dishwasher rack and keeps them properly spaced for optimal dish cleaning. It prevents tines from bending, breaking, or falling out during normal wash cycles. Replace these clips when tines become loose, fall out, or no longer hold dishes securely in place.

Do-It-Yourself Stories from Customers like You My dishwasher soap dispenser would not close and the spot remover dispenser wasn't working   George K. • Wells , ME • December 09, 2014

Replaced the soap dispenser. Read more

More
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google