Ge Zbd 6400 Parts

Includes 12 retainers.

This junction box cover replaces the appliance's electrical access panel to protect wiring and provide a secure entry point for the power cord. It restores a finished, safe electrical connection area and helps prevent exposed wiring. What it does

• Covers and protects the appliance's electrical junction box from dust and accidental contact
• Provides the mounting location and opening for the power cord/strain-relief connection
• Secures wiring and helps keep wire connections contained and stable
• Common symptom: cover cracked, missing, or loose—exposed wires or inability to secure the power cord

• Disconnect power at the breaker or unplug the appliance before servicing electrical parts
• Remove mounting screws from the old cover and replace with the new cover; retain or replace strain relief as needed
• Inspect the cord and wiring while access is open; replace any damaged wiring or strain relief components
• Follow the appliance manufacturer's instructions and local electrical codes for safe installation

Size: 10-16 ab.

Vent driver assembly operates the dryer vent door to manage airflow during operation. Replacing a faulty driver restores proper vent door movement, improving exhaust flow and helping prevent backdrafts. What it does:

• Moves and positions the vent/duct door so exhaust can exit when the appliance runs
• Retracts/closes the vent door when the appliance stops to limit backdrafts
• Common symptoms: vent door won't open or close, reduced exhaust airflow, or visible vent door sticking
• Interfaces with the vent door linkage and the appliance wiring harness to receive control signals

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Basic hand tools are typically required; support the vent door assembly during removal/installation
• Handle wiring connectors and plastic components carefully to avoid damage
• Follow the appliance's service manual or OEM instructions for exact steps and torque/spec guidance

Door strike catches the door latch to keep the appliance door closed, restoring secure closure and proper operation. Replaces a worn or broken strike to help prevent the door from popping open and losing temperature control. What it does:

• Catches and holds the door latch so the door stays closed during normal use — common repair for doors that won't latch reliably
• Restores consistent door sealing to help reduce drafts and temperature loss
• Replaces the original strike at the latch assembly and mounting points
• Helps prevent issues caused by a loose or damaged strike, such as frequent door openings or poor sealing

• Disconnect power (unplug or shut off the breaker) before servicing the appliance
• Basic hand tools (screwdriver) are typically required; access may require removing inner door trim or a small access panel
• Handle the door and strike carefully; align the latch before tightening screws and avoid overtightening

Replacement latch keeper for the dryer door latch assembly that secures the latch and keeps the door closed during operation. Restores reliable door engagement to help the appliance start and complete cycles. What it does:

• Secures the door latch so the dryer door stays closed during operation.
• Aligns with the latch mechanism to maintain proper door engagement.
• Common symptom: dryer door won't latch or feels loose, causing the cycle to not start or stop unexpectedly.
• Replaces worn or broken keeper pieces that allow rattling or misalignment.

• Disconnect power (unplug electric or shut off gas and breaker) before servicing.
• Access with basic hand tools; remove the door or front panel as needed to reach the keeper.
• Install carefully to avoid cracking surrounding plastic; do not force parts into place.
• After installation, verify the door closes securely and the dryer starts through a test cycle.

A replacement electronic control module that manages the appliance's cycle functions and user commands, restoring reliable control and timing when the original module fails. Replaces a faulty control assembly to help return normal operation. What it does:

• Controls cycle timing, power distribution, and signals between sensors and the user interface.
• Replaces a failing control when the appliance won't start, is unresponsive to button presses, or stops mid-cycle.
• Works as the central command board that interprets inputs and runs programmed cycles.

• 1 Module control assembly

• Disconnect power (and water supply for washers) before attempting any repair.
• Handle the board by its edges and avoid touching components; use anti-static precautions if available.
• Reconnect all wiring harnesses and secure mounting hardware before restoring power.

This replacement keypad provides the push-button controls for the oven/range control panel so you can restore responsive temperature, timer and function input. It gives a direct, like-for-like way to fix unresponsive or damaged front-panel buttons. What it does:

• Replaces the front-panel push-button keypad used to select bake, broil, timers and other oven functions
• Restores button responsiveness when keys are sticky, worn, or no longer register presses
• Helps resolve control-panel input issues and some user-interface error symptoms
• Works with the existing control board and ribbon/cable connection to send user commands

• One keypad assembly

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Installation typically requires removing the oven/range control panel trim; keep screws and fasteners organized
• Handle the flat ribbon/cable and connector gently; ensure proper seating when reinstalling
• Test keypad operation before fully reassembling the trim and outer panels

This hex-washer-head screw secures appliance components and panels. The correct 10-16 thread, 1-inch length fastener restores a tight, factory fit when an original screw is missing, stripped, or corroded.

• Fastens brackets, shields, trim, or panels to the appliance chassis
• Helps resolve rattling, gaps, or loose parts caused by a missing/damaged screw
• 10-16 thread with 1-inch length matches factory hardware for specified locations
• Hex-washer head provides solid tool engagement and distributes load to protect surfaces

• Disconnect power before servicing; if working on a gas appliance, also shut off the gas supply
• Support the part being secured and align holes before tightening
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing
• Replace any additional missing screws in the same area for uniform support

This clamp secures a hose or small tubing connection on compatible GE laundry appliances to help prevent leaks and keep the connection stable during operation. Durable metal construction resists vibration and wear. What it does:

• Holds a hose or tube firmly to a fitting to reduce leaks and loss of water or airflow
• Stops hose slippage caused by vibration or pressure changes
• Helps restore a tight connection after hose replacement or service
• Simple, low-profile design for use in confined appliance spaces

• Disconnect power and shut off water supply before servicing
• Drain hoses and remove remaining water to avoid spills
• Use the proper screwdriver or nut driver to tighten; do not over-tighten
• Inspect the hose and fitting for wear and replace if damaged before reinstalling the clamp

A small replacement clamp used to secure hoses and small assemblies to prevent leaks or disconnection. Fits the original mounting point and restores a tight seal where the worn clamp no longer holds reliably. What it does:

• Secures a hose or tubing connection to keep water or air from leaking
• Restores proper tension where the original clamp has loosened or corroded
• Helps stop intermittent leaks and prevents hoses from slipping off fittings
• Works in confined appliance areas where a compact clamp is required

• Turn off power and water to the appliance before starting any repair
• Use appropriate hand tools; avoid over-tightening to prevent hose damage
• Dispose of the old clamp and any corroded hardware; inspect surrounding fittings for wear

This float dome positions and protects the float inside the tub so the appliance can sense water level correctly. Replacing a cracked or missing float dome helps restore reliable fill control and reduces overfill or erratic fill symptoms. What it does

• Houses and guides the float so the fill sensor detects water level accurately.
• Prevents the float from sticking or catching on the tub, which can cause overfilling.
• Helps stop intermittent or continuous fill problems caused by a broken or displaced float.
• Keeps debris away from the float area to reduce false water-level readings.

• Disconnect power and water supply before accessing the tub or removing panels.
• Remove the lower access panel or kickplate to reach the float area; handle plastic parts gently to avoid cracking.
• Inspect surrounding seals and the float itself; replace any damaged components for reliable operation.
• After installation, restore power and run a short fill/drain cycle to verify correct float movement and water-level control.

This mechanism assembly is the timed control component that advances and governs cycle functions, restoring proper cycle sequencing and timing for the appliance. It replaces a worn or non-advancing timer mechanism. What it does:

• Advances the appliance timer so cycles progress to the next step
• Controls mechanical switch cams that engage heating, agitation, or spin
• Commonly helps when cycles won't advance, stop mid-cycle, or run continuously
• Works as the core drive for mechanical timer-based controls

• Disconnect power before servicing to avoid shock or injury
• Handle gently; align cams and shafts as OEM instructions specify
• Refer to the appliance's service manual or tech sheet for exact alignment and testing procedures

This 10-32 hex head screw secures appliance panels and components where a small machine screw is required. It provides a durable, threaded fastening point for repair or reassembly. What it does:

• Fastens panels, brackets, and small components using a 10-32 machine thread
• Hex head accepts a 7/16" socket or wrench for positive torque application
• Replaces worn or damaged screws that cause loose or rattling parts
• Compatible with common metal-to-metal and tapped-hole connections

• One 10-32 hex head screw with 7/16" socket head

• Use the correct 7/16" socket or wrench to avoid rounding the head
• Thread engagement should match the appliance's threaded insert; do not force if resistance is felt
• Follow manufacturer service manual for torque specs and installation sequence
• Disconnect power and follow safety procedures before servicing the appliance

The RING NUT W/GASKET is an OEM component specifically designed for GE dishwashers. This part utilizes both a ring nut and gasket to form a watertight seal around the fittings to which it attaches. 

Causes of a bad ring nut can include cracks, chips or damage to the gasket preventing a proper seal. Over time, gaskets can become brittle or deteriorate due to exposure to heat and chemicals from the wash cycle.

Symptoms of a bad Ring Nut W/Gasket include: 

• Leaks or water damage around fittings
• Puddles or standing water below connections
• Moisture or corrosion around connections
• Reduced washing or drying performance 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

A lower stud and roller assembly is a feature included in dishwashers. The primary function of this piece is to allow the dishwasher rack to slide in and out of the machine smoothly. When the lower stud and roller assembly is broken or missing, a replacement part is necessary to continue the efficient use of the appliance.If the lower dishrack in the dishwasher will no longer slide in and out easily, it's an indication that there is a problem with the lower stud and roller assembly. It's a simple repair to complete. Wear gloves and disconnect the appliance before starting. Slide the dishwasher rack completely out to gain access to the lower stud and roller assembly. Secure in place, and slide the rack back into position.This lower stud and roller assembly is an authentic OEM replacement part. It is sourced by the manufacturer. The component is sold as an individual unit. The lower stud and roller assembly is made of high-quality, durable materials. The part is compatible with several models of dishwashers. The piece can be installed in General Electric, Hotpoint, and RCA brand appliances.