Gfd28gmleees Parts

This is a single #10-18 x 3/4 inch flat-head screw used to secure panels and components in appliances. It replaces worn or missing fasteners so parts stay properly mounted and aligned. What it does:

• Fastens appliance panels, brackets, and components with a flat-head finish for flush mounting
• Replaces stripped, rusted, or missing screws that cause loose or rattling parts
• Provides a secure threaded connection for consistent operation
• Compatible where a #10-18 thread, 3/4" length flat-head screw is specified

• One (1) screw, #10-18 x 3/4 in., flat head

• Use the correct screwdriver bit (flat or Phillips depending on head style) and avoid over-tightening to prevent stripped threads
• Disconnect power to the appliance and follow manufacturer safety procedures when accessing internal components
• Dispose of damaged hardware and replace with matching specifications for safe operation

This PCB cover assembly protects and secures a range of control electronics, keeping the control board safe from dust, debris and accidental contact. It restores the original housing and helps maintain reliable board operation. What it does:

• Shields the control PCB from moisture, crumbs and physical damage
• Helps prevent shorts caused by loose wires or foreign objects
• Keeps wiring and connectors routed and secured to reduce strain
• Restores proper fit and spacing over the control board for normal operation

• One PCB cover assembly

• Disconnect power to the appliance before servicing to avoid shock
• Handle the control board and connectors carefully; avoid touching components and use anti-static precautions if available
• Use basic hand tools to remove mounting screws/clips and secure the cover in the original position
• If you see damaged wiring or a compromised control board, replace components as needed before reassembly

This left-side support secures and stabilizes the refrigerator door/side assembly for proper alignment and function. Replacing a worn or damaged support helps reduce door sag, improve sealing, and stop rubbing or unusual noises. What it does:

• Supports the left side of the door/side assembly to maintain proper alignment
• Prevents door sag that can cause poor sealing or uneven closing
• Reduces rattling or rubbing caused by a loose or broken support
• Restores proper fit to help the gasket seal and temperature control

• Disconnect power and empty the door area before starting any repair
• Follow OEM instructions for door removal/realignment; some screws/fasteners must be removed and re-torqued
• Handle adjacent trim or glass carefully to avoid damage

This louver duct channels return air in the freezer to the ice maker area, helping maintain proper airflow for ice production and consistent freezer temperatures. A direct-fit replacement for the freezer ice maker return duct. What it does:

• Directs cold airflow from the freezer to the ice maker/ice bin area
• Helps prevent localized frost buildup by controlling air movement
• Supports consistent ice production and even freezer cooling
• Replaces cracked, broken or missing ducts that cause air leakage or noise

• One louver duct (ice maker return)

• Disconnect power to the appliance before servicing
• Remove freezer liner or access panels as needed to reach the duct
• Handle plastic components carefully to avoid cracking; use the OEM fasteners where required

This ground harness is a factory-style wire assembly that provides a safe electrical return path to reduce shock and interference risks. It restores proper grounding for affected appliance circuits and helps maintain safe operation. What it does:

• Connects appliance metal chassis/components to the ground system to prevent stray voltage and reduce shock risk
• Provides the ground path for control boards and other electrical components to function correctly
• Common symptom: appliance shows electrical faults, intermittent operation, or visible arcing at connection points
• Used when original ground wire is damaged, corroded, or has a failed connector

• One ground harness (wire assembly) as pictured

• Always unplug the appliance or disconnect power at the breaker before starting work
• Match connector types and routing to the original harness; secure all fasteners and strain reliefs
• Inspect mounting points and mating terminals for corrosion; replace fasteners if damaged

The Handle is an OEM part for GE refrigerators. It allows for easy opening and closing of the door. This handle is designed to provide a sturdy grip, making it convenient to access your food items.

A bad handle can be caused by wear and tear over time, excessive force applied to the handle, or damage due to accidental impact or mishandling.

Symptoms of a bad drawer handle include:

• Difficulty in opening or closing the door.
• Loose or wobbly handle.
• Cracks or breaks in the handle.

Replace your worn-out or damaged handle with this OEM part and restore your refrigerator. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This outer door gasket seals the refrigerator's right-hand door edge to help maintain a consistent internal temperature and reduce energy loss. It replaces a worn or damaged seal to help keep food fresher and prevent moisture buildup. What it does:

• Creates an airtight seal along the right-hand outer door edge to minimize cold air escape.
• Helps prevent condensation and frost buildup around the door perimeter.
• Reduces compressor run time by improving overall cabinet insulation.
• Common symptom: visible gaps, torn or compressed seal, or persistent moisture at the door edge.

• Disconnect power to the appliance before attempting any repairs.
• Remove the old gasket carefully; some models use clips or adhesive—follow model-specific procedures.
• Clean and dry the mating surface before installing the new gasket to ensure a proper seal.

This housing wire is the replacement wiring housing used with the ice maker assembly in the freezer compartment. It protects and routes ice-maker wiring to help maintain reliable ice production and prevent wire chafing. What it does

• Protects and organizes ice maker wiring inside the freezer to prevent damage and shorts
• Helps maintain a secure connection between the ice maker and freezer harness
• Commonly replaced when wiring housing is cracked, torn, or allowing wire exposure
• Can resolve intermittent ice maker operation or electrical arcing caused by damaged wire insulation

• One housing wire assembly as shown

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Access may require removing the ice maker or freezer liner
• Handle wiring and connectors carefully to avoid damage; replace any worn connectors or clips

This stopper divider holds and positions a refrigerator drawer or shelf divider to keep contents separated and prevent sliding. Durable molded plastic replaces a worn or broken stop to restore proper drawer alignment and function. What it does:

• Stops and anchors the refrigerator drawer/divider to prevent shifting during normal use
• Restores correct drawer travel and alignment when the original stop is cracked or missing
• Helps maintain organized storage by keeping divider panels in place
• Works with compatible OEM drawer and divider assemblies to ensure proper fit

• One stopper divider part as shown

• Basic hand tools may be required; inspect mounting area for debris or damaged clips before installing
• Align and snap or slide the stopper into the factory location until it seats securely
• Do not force parts into place; replace damaged clips or supports if the stopper will not seat properly
• Unplug or power off the appliance before inspecting interior components for safety

Protective plastic cover that shields the appliance main control board from dust, moisture and accidental contact. Keeps the control electronics enclosed for safer operation and easier servicing without touching the board. What it does:

• Protects the main control board from spills, dust and physical contact that can cause shorts or damage
• Helps prevent accidental contact with live terminals during use or maintenance
• Keeps wiring and connectors secured and routed away from moving parts
• Restores the original enclosure for a proper OEM fit and finish
• Useful when the existing cover is cracked, warped or missing

• Always disconnect power to the appliance before servicing electrical components
• Remove interior panels or shelves as needed for access; retain mounting screws for reinstallation
• Align cover tabs and screw holes carefully to avoid stressing the board or connectors
• If the control board shows signs of damage, inspect or replace the board before reassembly

This right-side closure door replaces a damaged or worn closure panel to restore a proper seal and prevent airflow or debris from entering the compartment. It fits into the door/frame assembly and restores normal closing operation. What it does:

• Covers and seals the right side of the door/frame to help maintain internal temperature and keep contents protected
• Helps prevent drafts, moisture intrusion, and debris from entering the compartment
• Restores proper door alignment and latching behavior when the original closure is cracked, warped, or missing
• Reduces noise and rattling caused by a loose or damaged closure component

• One right-side closure door

• High-level replacement: remove the door or inner panel as required to access mounting locations, then fasten the new closure in the original orientation
• Use common hand tools; keep all fasteners organized for reassembly
• Disconnect power (or follow appliance-specific safety steps) before working on refrigerators/freezers or other powered appliances

This deli pan top rear cover replaces the rear trim piece on the deli/warming top, restoring a finished appearance and protecting internal components from food, grease and spills. Keeps the deli area sealed and easier to clean. What it does

• Covers and protects the rear edge of the deli/warming pan top assembly.
• Shields wiring and internal components from food debris and grease buildup.
• Restores a proper fit and finish when the original rear trim is cracked, broken or missing.
• Helps maintain a clean, hygienic deli surface and simplifies wiping and maintenance.

• One deli pan top rear cover.

• Disconnect power to the appliance before beginning any service.
• Removal may require releasing clips or removing a few screws; keep hardware for reassembly.
• Handle the cover gently to avoid cracking; align tabs/clips before seating.