Gfd65espnosn Parts

A flat steel washer that spaces and protects fasteners to keep components aligned and reduce wear. Fits where a thin, durable metal shim is needed to distribute load and prevent screw or bolt damage. What it does:

• Distributes clamping force from a fastener to protect softer surfaces
• Maintains proper spacing and alignment of components
• Reduces wear and abrasion between parts
• Can help reduce loosening from vibration when used with the correct fastener

• Disconnect power and unplug the appliance before servicing.
• Use the correct bolt or screw; do not overtighten—tighten to snug plus a short turn.

A replacement screw used to secure a terminal block to the appliance chassis, restoring a stable electrical connection and eliminating loose or wobbly terminals. Simple hardware part for reliable terminal mounting. What it does:

• Secures the terminal block to the appliance frame so wiring stays in place
• Helps maintain tight electrical contact at power terminals
• Can prevent intermittent power, arcing, or loose-wire symptoms when the screw is worn or missing
• Compatible with terminal-block style connections on many appliances

• Always disconnect power at the breaker or unplug the appliance before servicing
• Use the correct screwdriver or driver bit to avoid stripping the screw head
• Tighten until snug—do not overtighten and avoid deforming the terminal block
• If wiring or terminals are damaged, replace or repair those parts before restoring power

This motor gasket is a molded sealing pad that cushions and seals the motor assembly to the appliance chassis, helping reduce vibration and protect the motor from debris and moisture. Replacing a worn gasket restores proper motor alignment and quieter operation. What it does:

• Cushions and isolates the motor to reduce vibration and noise during operation
• Seals the motor mounting area to help prevent dust, lint, and moisture intrusion
• Helps maintain correct motor alignment to avoid rubbing or premature wear
• Commonly replaced when torn, flattened, or degraded and causing excess vibration or noise

• One motor gasket

• Disconnect power (unplug or shut off breaker) before starting any repair
• Requires partial appliance disassembly to access the motor; follow OEM service instructions
• Inspect surrounding mounting hardware and motor for damage while replacing the gasket
• Do not use adhesives or improvised fasteners unless OEM instructions specify

Size: 8 - 18 ab.

The Ground Screw is an OEM part for GE dryers. It ensures proper grounding and electrical safety for your dryer. This screw securely connects the ground wire to the dryer chassis, providing a path for electrical current to safely discharge in the event of a fault or power surge.

A bad Ground Screw can lead to electrical issues and potential safety hazards. Causes of a bad Ground Screw can include corrosion, loose connections, or damage due to accidental mishandling or improper installation.

Symptoms of a bad Ground Screw include:

• Intermittent dryer operation
• Visible signs of damage or deterioration on the screw or ground wire
• Tripped circuit breakers or blown fuses

Replace your faulty or damaged Ground Screw with this genuine OEM GE part to ensure proper grounding and electrical safety for your dryer. 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This main electric harness routes power and signals between the range's control and major components to restore proper electrical connections. It replaces a worn or damaged wiring harness to help resolve intermittent power, controls, or element issues. What it does:

• Provides main wiring connections between the control board, terminal block, and major oven/range components.
• Restores lost or intermittent power to elements, burners, or control circuits caused by damaged wires or connectors.
• Replaces frayed, burnt, or corroded wiring that can cause overheating, error codes, or component failures.
• Maintains proper connector fit and routing to prevent shorting or pinch damage during normal use.

• High-level installation recommended for users comfortable with appliance electrical work; disconnect power at the breaker before servicing.
• Inspect surrounding insulation and clips; replace any damaged fasteners to prevent chafing.

This bracket secures the power/start button to the appliance control panel so the button stays aligned and functions correctly. Replacing a damaged bracket restores proper button fit and reliable user control. What it does:

• Holds the power/start button in place inside the control panel assembly.
• Keeps the button aligned so presses engage the switch consistently.
• Prevents the button from rattling, sticking, or falling out of the panel.
• Used when the button housing is cracked, bent, or missing mounting support.

• Disconnect power to the appliance before beginning any work.
• Remove the control panel trim or fascia to access the bracket; keep screws and fasteners organized.
• Handle internal components gently to avoid damaging the button, switch, or wiring.

This terminal block cover protects the appliance's electrical terminal block by enclosing wiring connections to reduce exposure and help prevent accidental contact. It restores the factory safety shield for safe operation. What it does:

• Shields high-voltage terminal connections from accidental contact
• Helps keep wiring routed and secured at the terminal block
• Reduces risk of shorting or arcing near the connection points
• Useful when replacing or servicing terminal block wiring or power cords

• One terminal block cover

• Always disconnect power at the breaker or unplug the appliance before working on electrical components
• Remove the appliance access panel to reach the terminal block, then place the cover over the terminals and fasten with the original screws
• Ensure all terminal connections are tight and properly insulated before restoring power

This stainless steel machine screw secures appliance components and trim for a reliable, corrosion-resistant hold. Use it when replacing lost or damaged fasteners to restore proper fit and reduce noise or misalignment. What it does:

• Fastens panels, brackets, and small assemblies where a #8-28 threaded screw is required
• Provides a rust-resistant connection for wet or humid appliance areas
• Helps stop rattling, loose trim, or misaligned parts caused by missing or stripped screws

• Disconnect power to the appliance before servicing
• Use the correct screwdriver or driver bit to avoid stripping the head
• Thread carefully by hand to avoid cross-threading; tighten until snug—do not overtighten
• Keep removed screws organized to ensure correct reassembly

This main wiring harness routes power and signals between the oven's control, terminal block and internal components to restore reliable electrical connections and appliance operation. Designed for direct replacement in compatible electric ranges. What it does:

• Connects the control board, terminal block and internal components for proper power and signal flow.
• Re-establishes lost or intermittent electrical connections caused by damaged or frayed wires.
• Helps resolve symptoms like elements or controls that don't receive power, intermittent operation, or visible wiring damage.
• Fits where the factory harness is located behind the oven control or console.

• Disconnect power at the breaker before servicing to avoid shock or injury.
• Compare the harness connectors and routing to the original part for correct fit before installation.
• Handle connectors gently; avoid pulling on individual wires when installing or removing.

This steam valve controls steam delivery to the appliance's steam system, restoring proper steam function for cycles that use steam. Replaces a failed or leaking steam control valve to help re-enable steam cleaning or refresh cycles. What it does:

• Opens and closes to allow steam or water into the steam generator when the cycle calls for it
• Restores steam production when a faulty valve prevents steam generation
• Stops flow to prevent leaks when the valve fails to seal
• Works with the machine's control system to time steam delivery during cycles

• Disconnect power and water supply before starting any repair
• Handle connectors and hoses carefully; inspect seals and replace gaskets if damaged
• Typical installation requires removing access panels and unplugging electrical connectors; secure wiring and plumbing before testing

This Leveling Leg is an OEM replacement part for GE washing machines and dryers. It plays an essential role in maintaining the stability and balance of the appliance. This leveling leg is designed to withstand the weight and vibrations of the machine, ensuring it remains level and operates smoothly.

Over time, leveling legs can wear down, become damaged, or lose their ability to adjust properly due to constant vibrations, uneven flooring, or shifting of the appliance. An unbalanced appliance can lead to inefficient operation, increased wear and tear, and potential safety hazards.

Symptoms of a bad Leveling Leg include:

• The appliance is unstable or wobbles during operation.
• Excessive noise or vibration more than usual.
• Difficulty in aligning the appliance level on the floor.
• Visible wear or damage to the leveling leg.
• The appliance tilts or leans to one side.

This GE OEM replacement part is compatible with Hotpoint, RCA, and Kenmore models.

The Drum Baffle is an OEM part for GE electric and gas dryers. Located inside the rotating drum, this baffle helps separate and tumble fabrics efficiently during drying cycles. 

Symptoms of a damaged or improperly functioning baffle include:

• Excessively long dry times 
• Items not fully drying or left damp after a cycle
• Increased tangling or bunching of clothes within the drum

Causes stem from cracking/breaking under repeated impacts from swinging loads, general wear over extended use, or damage upon removal of tightly packed fabrics.

This genuine GE replacement restores balanced tumbling action within the drum. 

The Wire Tie is an OEM part for GE dryers. It is used to secure and organize internal wiring, ensuring that wires remain properly positioned and do not interfere with the operation of the dryer. This part plays an important role in preventing wires from becoming tangled, pinched, or damaged during the dryer’s cycles.

Over time, the wire tie can become worn out, broken, or damaged due to prolonged exposure to heat, vibrations, or wear from normal use. A compromised wire tie can lead to loose or unsecured wiring, which may impact the performance of the dryer or cause electrical issues.

Symptoms of a bad Dryer Wire Tie include:

• Loose or unsecured internal wiring
• Interference with dryer components during operation
• Electrical malfunctions or short circuits
• Wires appearing frayed or damaged due to improper support

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Idler Spring is an OEM part for GE electric dryers. It is located within the drum assembly and provides the necessary rotational force during tumbling cycles.  

As a moving component, normal wear from repeated use can degrade the idler spring over time. Cracks, breaks, or loss of tension are potential causes of failure. 

Symptoms of a faulty idler spring include:

• Vibration noises emerging during cycles  
• Ineffective or reduced drum spinning for drying clothes
• Potential damage to other components from lack of support

Causes typically include normal wear and tear. Repeated heavy loads may accelerate component deterioration as well.

This genuine GE replacement spring restores proper tensioning to tumbling cycles. Compatible with some Hotpoint, RCA, and select Kenmore dryer models too, it improves stability and lengthens equipment life. Replacing a worn spring prevents ongoing operational issues.