Gfd65gspnsn Parts

The Drum Baffle is an OEM part for GE electric and gas dryers. Located inside the rotating drum, this baffle helps separate and tumble fabrics efficiently during drying cycles. 

Symptoms of a damaged or improperly functioning baffle include:

• Excessively long dry times 
• Items not fully drying or left damp after a cycle
• Increased tangling or bunching of clothes within the drum

Causes stem from cracking/breaking under repeated impacts from swinging loads, general wear over extended use, or damage upon removal of tightly packed fabrics.

This genuine GE replacement restores balanced tumbling action within the drum. 

This dryer thermostat controls operating temperature by opening and closing the heater circuit, helping deliver consistent drying performance and safety. Replacing a failed thermostat restores proper heat regulation and helps prevent under- or over-drying.

• Monitors air temperature and cycles the heating element on and off to maintain target heat.
• Helps protect against overheating by interrupting power when temperatures exceed its calibrated threshold.
• Common symptoms include no heat, weak heat, long dry times, or the dryer running too hot/shutting off on high-temperature safety.

• Disconnect power; if gas, also shut off the gas supply before servicing.
• Access location varies by model; typically mounts on the blower or heater housing.
• Transfer wires to the new thermostat one at a time and reuse existing mounting hardware.
• Clear lint and verify proper vent airflow before testing the dryer.

The Wire Tie is an OEM part for GE dryers. It is used to secure and organize internal wiring, ensuring that wires remain properly positioned and do not interfere with the operation of the dryer. This part plays an important role in preventing wires from becoming tangled, pinched, or damaged during the dryer’s cycles.

Over time, the wire tie can become worn out, broken, or damaged due to prolonged exposure to heat, vibrations, or wear from normal use. A compromised wire tie can lead to loose or unsecured wiring, which may impact the performance of the dryer or cause electrical issues.

Symptoms of a bad Dryer Wire Tie include:

• Loose or unsecured internal wiring
• Interference with dryer components during operation
• Electrical malfunctions or short circuits
• Wires appearing frayed or damaged due to improper support

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Idler Spring is an OEM part for GE electric dryers. It is located within the drum assembly and provides the necessary rotational force during tumbling cycles.  

As a moving component, normal wear from repeated use can degrade the idler spring over time. Cracks, breaks, or loss of tension are potential causes of failure. 

Symptoms of a faulty idler spring include:

• Vibration noises emerging during cycles  
• Ineffective or reduced drum spinning for drying clothes
• Potential damage to other components from lack of support

Causes typically include normal wear and tear. Repeated heavy loads may accelerate component deterioration as well.

This genuine GE replacement spring restores proper tensioning to tumbling cycles. Compatible with some Hotpoint, RCA, and select Kenmore dryer models too, it improves stability and lengthens equipment life. Replacing a worn spring prevents ongoing operational issues.

This 10-32 screw with a hex-washer head fastens panels, brackets, or components as specified by the manufacturer. Replacing worn or missing hardware restores a secure fit and helps reduce vibration, rattling, and loosening during operation.

• Provides 10-32 machine-thread fastening at the designated mounting point
• Hex-washer head helps distribute load for a tight, reliable clamp
• Replace if the original is missing, stripped, corroded, or won't stay tight
• Helps address loose panels/brackets, vibration, or rattling noises

• Disconnect power before servicing; if working on a washer, also shut off the water supply
• Use a driver or nut driver that matches the screw head
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Reinstall any original hardware in the same order it was removed

This small replacement panel clip secures a trim or cabinet panel to the appliance, restoring proper fit and preventing gaps or movement for a cleaner appearance and quieter operation. What it does

• Holds a trim or cabinet panel in place to maintain alignment and fit
• Prevents panel rattling or vibration during normal operation
• Replaces broken or missing clips that cause loose or sagging panels
• Helps maintain a finished look and keeps panels from shifting

• One panel clip

• Disconnect power or follow safety lockout procedures before removing panels near electrical components
• Remove the affected trim or panel per the manufacturer service instructions to access clip locations
• Clip typically installs by snapping or pressing into the panel or cabinet; replace all damaged clips for uniform fit

This rear drum support is the replacement bracket that holds and aligns the dryer drum at the rear, helping the drum turn smoothly and reducing wear. It restores proper drum positioning for quieter, more reliable operation. What it does

• Supports the rear of the dryer drum and keeps the drum centered during rotation
• Helps prevent drum wobble, rubbing, and uneven wear
• Reduces noise caused by a misaligned or unsupported drum
• Works with the drum bearing/retainer and other rear support components to maintain smooth operation

• One rear drum support bracket

• Disconnect power (unplug electric or shut off gas and unplug) before starting repairs
• Access requires removing the dryer cabinet or rear panel; support the drum while removing the old bracket
• Inspect drum bearing, roller(s), and seals when replacing this support and replace any worn components
• Reassemble panels and test dryer on a short cycle to ensure smooth operation

The GE Badge is an OEM part for GE washing machines. It is an emblem installed on the exterior of the washer that identifies the manufacturer and brand. Beyond aesthetics, the badge also demonstrates authenticity and quality assurance for the appliance.

Causes of a bad badge can include damage from impact or weathering over time, loss of adhesion to the outer casing, or fading/wear of printed graphics.  

Symptoms of a bad badge include:

• Missing or loose badge that is no longer securely attached
• Faded or illegible print that fails to display the brand
• Cracks or pieces breaking off the badge surface

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

A Belleville nut is a conical spring-style washer that provides axial tension and helps maintain a secure fastening under vibration and thermal cycling. It prevents fasteners from loosening so components stay mounted and aligned. What it does:

• Acts as a spring washer to keep bolts and studs under constant tension
• Helps prevent fasteners from backing out due to vibration or thermal changes
• Restores proper clamp force when a standard flat washer no longer holds
• Commonly used where a compact, high-load spring washer is required

• One Belleville nut

• Disconnect power to the appliance before servicing and follow all safety precautions
• Install on the correct fastener and seat the cone so it provides axial spring force
• Do not reuse if visibly deformed, corroded, or cracked
• Avoid over-tightening; snug to manufacturer torque specification when available