Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fixes weak water dispenser flow and no ice production. Controls water supply to your refrigerator's dispenser and ice maker. DIY-friendly repair.
Replaced water inlet valve Read more
Ice maker not cycling or producing ice? Stops working after years of use when internal gears wear out. Replacement restores automatic ice production.
The Set Screw is an OEM part for GE refrigerators. The set screw fits into the handle assembly, ensuring a tight and stable connection to the refrigerator door. This set screw is essential for preventing the door handle from becoming loose or coming off, which can affect the ease of opening and closing the refrigerator door.
Causes of a malfunctioning Set Screw can vary. Normal wear and tear is a common issue, causing the screw to strip or loosen over time. Incorrect installation is another factor.
Symptoms of a bad Set Screw include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
I ordered the replacement handle parts based on the model number. Read more
The Connector Gear Pinion is an OEM part for GE refrigerators. It is integral to the smooth operation of the freezer drawer, connecting the rail system and allowing the drawer to open and close effortlessly.
Causes of a bad connector gear pinion can include general wear and tear over time, excessive force applied during operation, or debris causing obstructions within the mechanism.
Symptoms of a bad Connector Gear Pinion include:
Easy fix with parts ordered. No tools. Parts fit perfectly! Best service. Parts arrived the next day!! Read more
The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.
Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.
Symptoms of a compromised screw placement include:
This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
The replacement of the arm took a total of 3 minutes, all I needed was a nut driver for the easy job, taking the old arm out and putting the new one in, exact replacement , I appreciate you getting the part out as fast as you did. It took an extra day because of the ice storm we had . That was ok. Thanks you . Read more
Fixes slow water dispensing or small ice cubes in your refrigerator. The filter manifold connects your water filter to the dispenser and ice maker.
You need to pull the refrigerator out and disconnect the two water lines. Quick connect is very easy and not even one drop of water leaked. Make note of which water line connects where. The hose with the red mark connected to the input from the wall. The line with the blue mark connected to the line going back into the refrigerator. Open the refrigerator and remove the rear Phillips head screw from the filter holder. With a flathead screwdriver carefully pry the white manifold bracket so it... Read more
Lower drawer gear for bottom-mount refrigerators. Installs on the left side of the freezer drawer assembly. Replace if cracked, broken, or damaged.
Replaced the fan with the part ordered. Required the removal of a shelf and the lower drawer to remove access plate. Read more
Folding center strip that seals the gap between French doors. Replace if worn, damaged, or causing air leaks and condensation. Verify fit by model number.
Replaced with a new flapper. Read more
Water filter bypass plug allows your refrigerator to operate without a filter by creating direct water flow. Replace if damaged or worn. Confirm fit with your model.
Ordered a bypass and installed it. Read more
Secures the crossbar in your refrigerator's interior for stable shelving support. Replace if pin is broken, missing, or worn to restore proper fit.
Fix a refrigerator that clicks but won't cool by replacing the compressor start device. This relay and overload assembly helps start the compressor reliably.
Replaced TSD combo. Read more
Fix low ice production or no water flow to your ice maker. This inlet valve controls water supply to ensure proper ice maker filling and shut-off.
I repaired the Valve Im Water ASM and that didn't do the trick, but once I replaced the Filter Manifold, all was good and the water was flowing again. Very easy to repair, watch a Youtube video to disconnect the pipes from the quick connects. The project only took 5 minutes, including watching the video. Read more
The Refrigerator door board profile is an OEM replacement part for GE refrigerator doors. It is the electronics responsible for operating door functions like illumination, alarm systems, temperature displays, and sealed system sensors. Causes of a bad control board can include moisture penetration corroding circuits over time, cracks or breaks from impact, or malfunctions in electronic components. Symptoms of a bad control board include:
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Removed cover unplugged board cleaned area and plugs put new board in put cover back on and plugged refrigerator in. Read more
Fix refrigerator lights that won't turn on when you open the door. This light door switch activates interior lighting. DIY repair in under 30 minutes.
I tested the conductivity across the door switch and found the switch had failed. Read more
Right door bin for bottom-mount refrigerators. Mounts inside the door to organize beverages, condiments, and small containers. Replace if cracked or missing.
Everything was a perfect fit. Thanks for your help when we called for it. thanks a Lot Read more
Seals fresh food fan assembly to housing for proper airflow and temperature stability. Replace if damaged to reduce noise and vibration. Confirm fit.