Gfs2keyhss Parts

Replaces a cracked, broken, or missing left-side top hinge pad on your refrigerator. Restores proper door support and alignment where the door meets the cabinet top for smooth opening and secure closing.

Reduces refrigerator vibration noise by damping component and panel contact. Replace deteriorated mastic to eliminate rattles and buzzing. Confirm fit.

Fix water dispenser not working or filter not detected issues. This filter cover houses the RFID tag and secures your cartridge. Easy DIY fix.

Rubber grommet that cushions and protects refrigerant or water tubing where it passes through sheet metal. Replace if cracked, worn, or missing.

Stainless steel freezer drawer front panel for refrigerators. Replaces dented, scratched, or worn original front to restore clean appearance.

Fix refrigerator not cooling or freezing issues with this freezer evaporator coil assembly. Includes defrost heater. Moderate DIY repair, 1-2 hours.

This screw hinge center adjuster is a replacement hinge screw that helps align and secure the appliance door for smooth opening and a proper seal. Designed to restore correct door positioning and prevent sagging or uneven gaps. What it does:

• Replaces the center hinge screw/adjuster used in the door hinge assembly
• Helps realign the door to correct sagging, uneven gaps, or misalignment
• Secures hinge parts to maintain stable door movement and a tight seal
• Compatible with common symptom: door rubbing, dragging, or not closing evenly

• One screw hinge center adjuster

• Basic hand tools required; support the door during removal and installation
• Follow manufacturer service manual steps for hinge removal and door alignment
• Keep fasteners snug but avoid over-tightening to prevent stripping
• Turn off power to powered doors/controls and work with care around edges

This pad mastic is an adhesive sealant used to secure foam pads and insulation inside the appliance, helping keep components in place and reducing vibration and air gaps for more consistent performance. What it does:

• Bonds foam pads, insulation and other non-structural components to appliance cabinet surfaces
• Helps reduce vibration and noise by holding pads firmly in place
• Seals small gaps to limit air movement and moisture around insulation
• Commonly used during panel, liner, or insulation repairs and reassembly

• Unplug the appliance or shut off power before starting any repair
• Clean and dry mounting surfaces; remove old adhesive and debris for best adhesion
• Press pad into place and hold as needed; allow adhesive to set per OEM recommendations
• Wear gloves and avoid skin/eye contact; ventilate area when working with adhesives

This guide roller helps the refrigerator vegetable (crisper) pan slide smoothly and stay aligned so drawers open and close reliably. Replaces a worn or broken roller to restore even movement and reduce jamming. What it does:

• Supports and guides the veg/crisper pan along its track for smooth sliding
• Prevents drawer binding, catching, or uneven travel
• Reduces noise from a worn or damaged roller during drawer operation
• Helps keep the pan properly aligned so it seats correctly when closed

• Remove contents and fully support the drawer before servicing to avoid dropping or damaging the pan
• Inspect the track and mounting surface for damage or debris; clean before installing the new roller
• Typically installs with simple clips or a single fastener; have basic hand tools available

This is a stainless steel door handle designed for the freezer compartment of a refrigerator. It mounts to the exterior of the freezer door and provides a grip for opening and closing the door. Replace this handle if it is loose, cracked, broken, or if the mounting points have become stripped and the handle no longer stays securely attached.

This is a stainless-finish touch control panel for the refrigerator's water and ice dispenser area. It serves as the user interface for selecting water, ice, and other dispenser functions. Replace this touchpad if the buttons are unresponsive, intermittently working, or if the display is blank or flickering.

Fix water pooling or ice buildup in your fridge with a new defrost drain tube. Channels condensation from evaporator to drain pan. Simple install.

Case back tube for bottom-mount refrigerators. Installs behind the refrigerator case. Replace if cracked, damaged, or leaking to restore proper function.

This is a small plastic striker that activates the door light switch when the refrigerator door is closed. It presses against the light switch mechanism to turn the interior light off when the door shuts. Replace this part if your refrigerator light stays on constantly or fails to turn off when the door is closed, which can cause excess heat buildup and higher energy usage.

This spring feeler arm is the replacement sensing arm used with the refrigerator ice maker assembly to detect ice level and help actuate the ice-making mechanism. Restores proper ice sensing and helps prevent overfill or stoppage. What it does:

• Acts as the ice maker's feeler/bail arm to detect when the ice bin is full or empty.
• Triggers the ice maker to stop or continue cycles based on ice level.
• Helps prevent overfilling and reduces ice production problems caused by a bent or broken arm.
• Can stop erratic ice maker behavior when the original arm is damaged or worn.

• Disconnect power to the refrigerator before beginning any repair.
• Handle the arm carefully and inspect the ice maker mounting points for damage before installation.
• Reuse factory hardware if undamaged; replace any stripped or missing fasteners.