Gfw450ssmiw Parts

The Drive Motor Assembly is an OEM part for GE washing machines. It contains the electric motor that provides agitation and spinning movement during wash cycles.

Causes are often operational wear degrading internal motor windings and components over extended years. Failure endangers proper cleaning and rinsing performance.

Symptoms of a failing motor include:

• Weak or sluggish agitation leaving clothes dirty
• Inability to enter spin cycles for excess water removal
• Grinding noises emanating from inside the machine
• Complete lack of movement detected

This OEM GE  part is also compatible with Hotpoint, RCA, and some Kenmore models.

This air chamber assembly cushions water pressure in the appliance's supply line to reduce water hammer and help stabilize dispenser and ice-maker flow. It installs inline and restores smoother, quieter water operation. What it does

• Dampens sudden pressure changes in the water line to reduce knocking or banging sounds
• Helps maintain steadier water flow to dispensers and icemakers
• Can reduce stress on valves and fittings caused by water hammer
• Improve intermittent flow symptoms related to pressure spikes

• One air chamber assembly

• Turn off water supply and unplug the appliance before beginning work
• Drain water from the line and relieve pressure before removing the old part
• Inspect fittings and tubing for damage; replace any worn seals or clamps
• Tighten connections and test for leaks after installation

The Water Valve is an OEM part for GE washing machines. It controls the water flow into the appliance during fill cycles. 

Over time, mineral buildup can cause valves to malfunction or fail to close fully. Damage from worn O-rings or seals permitting leaks are also common causes of replacement need.
 
Symptoms of a faulty water valve may include:

• Slow or no water fill during cycles
• Inability to select specific water levels
• Fluctuating or unexpected water temperatures
• Water leaks from the valve area

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.
 

The Liquid Detergent Insert is an OEM part for GE washing machines. It is a small but important compartment that holds and dispenses precisely dosed amounts of liquid detergent during cycles. Located inside the detergent dispenser drawer, the liquid insert helps ensure the correct concentration of detergent is released. 

Causes of a bad liquid detergent insert can include cracked or broken plastic from repeated use, hardened plastic that no longer flexes properly to release detergent or damage to dispenser shutter mechanisms that control flow.

Symptoms of a bad liquid detergent insert include:

• Improper or uneven dispensing of detergent into the wash  
• Over or under-sudsing due to too much or too little detergent
• Residual detergent left in the insert compartment
• Reduced cleaning ability due to incorrect dosing

This genuine GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

A small M5 x 12 machine screw used to secure panels and components in compatible appliances. Simple, serviceable hardware that helps restore proper fit and stops rattling or loose parts. What it does:

• Fastens panels, brackets, or components where an M5 x 12 machine screw is specified
• Restores secure attachment when original screw is missing, loose, or damaged
• Helps eliminate vibration noise and misalignment caused by loose hardware
• Fits into pre-tapped holes designed for M5 machine-threaded fasteners

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or hex driver to avoid stripping the head
• Install straight and tighten snugly; avoid over-tightening which can strip threads or crack plastic
• If threads are damaged, replace the mating fastener or insert as needed before reuse

This water inlet pipe routes water from the refrigerator's supply to the dispenser and ice-making system, helping restore proper water flow and stop leaks at the inlet tubing. Durable molded tube designed to match factory fit. What it does:

• Carries water from the household supply to the fridge's dispenser and ice maker
• Replaces cracked, pinched, or corroded inlet tubing that can cause leaks
• Restores water flow when a damaged inlet pipe prevents dispensing or ice production
• Matches OEM shape to align with mounting points and fittings

• Turn off and disconnect power to the appliance before servicing.
• Shut off the water supply and drain remaining water from the line before removing the old pipe.
• Inspect and replace any worn seals, clips, or fittings; tighten connections to OEM torque specifications.

This inside drain hose directs defrost and condensation water from the freezer evaporator to the refrigerator drain system, helping prevent pooling and ice buildup. Replaces a worn, clogged, or cracked evaporator drain hose to restore normal drainage. What it does:

• Channels defrost and condensation water away from the evaporator area to the drain pan or tube
• Helps prevent water pooling, ice formation, and water leaks inside the freezer compartment
• Restores proper drainage when the original hose is cracked, split, or clogged
• Works with the appliance's internal drain fittings and clamp connections

• Disconnect power to the appliance before servicing to avoid electrical shock
• Access requires removing interior panels or the evaporator cover; handle evaporator fins and sensors carefully
• Check and clear drain inlet and drain tube of debris when replacing the hose
• Use proper clamps or fasteners and avoid kinks or tight bends that restrict water flow

The INVERTER is an OEM part for GE washers. It is an electrical component that works together with the motor to drive the agitator or spin cycle movements. The inverter module precisely controls the voltage, frequency, and waveform of current to provide efficient operation of mechanical components.

Causes of a bad inverter can include damage to electronic boards or wiring over time, failure of electrical components like capacitors or transistors, or water damage corrupting circuitry. 

Symptoms of a bad inverter include: 

• The washer unable to advance cycles or spin clothes 
• Erratic or inconsistent movements during agitation or spin
• Strange noises, smells, or smoke emanating from the unit
• Tripped circuit breakers or blown fuses

Replace yours today with this genuine OEM GE part to ensure reliable controlled electrical operation. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This front panel hanger secures the appliance's front service panel to the cabinet, restoring proper alignment and preventing vibration or sag. It's a direct-fit replacement designed to bring panels back to factory position for a clean, stable appearance. What it does:

• Supports and anchors the front service panel to the appliance cabinet
• Keeps the panel aligned to prevent gaps, sagging, or rubbing
• Reduces rattles and vibration caused by a loose or damaged hanger
• Helps the panel latch securely for safe, normal operation

• One front panel hanger

• Disconnect power before beginning any service
• Partial panel removal is typically required; support the panel during replacement
• Inspect surrounding clips and fasteners; replace if worn to ensure a secure fit

This main box sub is the appliance's control housing that holds and protects internal control components, wiring, and connectors to keep the unit's electronics organized and secure during operation. What it does:

• Houses control electronics and wiring harness connections to keep components organized and protected
• Provides mounting points and shielding for circuit boards and connectors
• Helps maintain proper routing of wiring to prevent pinching or strain on electrical connections
• Can reduce risk of intermittent electrical issues caused by loose or damaged housing

• Main box sub (housing) — single assembly

• Disconnect power (unplug or switch off breaker) before beginning work to avoid shock
• Handle gently and avoid placing stress on connected wiring or circuit boards
• Observe static-sensitivity precautions when handling any exposed electronics or PCBs