Gfw655spvods Parts

Seals the outer bearing to prevent leaks and contain moisture. Replace if you notice water leaks, unusual noise, or drum wobbling. Confirm fit with your model.

Fix washer leaks or no water flow with this pressure hose. Connects the water valve to internal components. Direct-fit replacement for easy installation.

Replace a cracked or missing drain pump access door to restore a secure, moisture-resistant seal. Keeps the service opening covered and protected.

This control board cover is the protective housing that shields the oven/range electronic control board from spills, grease, and accidental contact. It helps prevent debris and moisture from reaching sensitive circuitry for more reliable operation. What it does:

• Covers and protects the electronic control board from splashes, food debris, and grease
• Helps reduce accidental contact with control board components during use or service
• Can prevent shorting or damage caused by loose debris or minor moisture exposure
• Useful when replacing a damaged, cracked, or missing control board enclosure

• One control board cover

• Disconnect power at the circuit breaker or unplug the appliance before service
• Handle near electronics carefully; avoid touching circuit components directly
• Align cover over the control board and secure with the factory mounting clips or screws
• Inspect electronics before reassembly

This front damper bracket secures the refrigerator air-damper assembly to the cabinet, helping maintain proper airflow between compartments for consistent cooling. Durable replacement part designed to restore damper alignment and function. What it does

• Holds the air-damper assembly in the correct position to regulate cold-air flow between freezer and fresh-food sections.
• Helps prevent damper misalignment that can cause uneven temperatures or airflow noise.
• Works with the damper actuator and housing to enable controlled opening and closing of the air passage.
• Common symptom: broken, loose, or cracked bracket causing a rattling sound or improper damper movement.

• One front damper bracket.

• Intended for use in refrigerators; follow manufacturer service instructions for access and removal of interior panels.
• Disconnect power (unplug or shut off breaker) before starting any repair to avoid electrical shock.
• Use basic hand tools; avoid overtightening fasteners to prevent cracking the new bracket.

Replacement front panel in dark slate finish for your washer. Restores appearance when original panel is cracked, scratched, dented, or faded.

This user interface board replaces the control-panel electronics that run the washer's touchpad and display, restoring normal cycle selection and status feedback. Ideal for front-load washers with a failing or unresponsive control panel. What it does:

• Replaces the control electronics that register button presses and drive the display
• Restores ability to select cycles, start/stop washer, and view status indicators
• Commonly used when buttons are unresponsive, display is blank or erratic, or control errors appear
• Works with corresponding console wiring and display assembly to communicate with main control

• One user interface board

• Disconnect power and water supply before beginning service
• Handle the board by the edges and avoid static discharge; use a grounding strap if available
• Verify connector seating and orientation; do not force connectors

Fix washer leaks or drainage problems with this drain pump housing. Mounts the pump and channels water to the drain line. Moderate DIY repair.

Replace a missing or corroded ground screw to restore proper electrical grounding. Prevents shock hazards and ensures safe appliance operation. Quick fix.

Plugs the opening left by a shipping bolt on your washer. Covers the unused fastener hole to keep out dust and debris while restoring a clean look.

This is a drive pulley used in the washer's belt-driven mechanism to transfer motor rotation to the drum or pump. It helps maintain proper belt tension and smooth operation during wash and spin cycles. Replace this pulley if you notice squealing noises, the drum not spinning properly, or if the pulley appears cracked, worn, or wobbles on its shaft.

This pump filter sits in the drain pump housing to trap lint, coins, and small debris before they reach the impeller. Replacing a worn filter and seal helps restore proper drainage and prevent leaks at the pump clean-out.

• Screens debris to protect the pump and maintain drain flow
• Helps address slow or no-drain complaints and water left in the tub after a cycle
• Can reduce leaks at the filter access when the cap or O-ring is damaged or missing
• Replaces cracked or stripped filter caps to restore a tight, secure seal

• Disconnect power and turn off the water supply before servicing.
• Open the pump access panel; place towels or a shallow pan to catch residual water.
• Turn the old filter counterclockwise to remove; clear debris and wipe the housing clean.
• Ensure the seal is properly seated; hand-tighten the new filter until snug. Run a short fill/drain test to check for leaks.

This latch cover protects and finishes the appliance door latch area while keeping the latch mechanism clean and snag-free. It restores a smooth, finished look and helps the door engage correctly. What it does

• Covers the door latch assembly to protect internal components from dust and debris
• Provides a smooth surface to prevent clothing or items from catching on the latch
• Restores the original appearance where the latch cover is cracked, faded, or missing
• Helps maintain proper door engagement by holding the latch area aligned and shielded

• Disconnect power to the appliance before inspecting or replacing any door components
• Access may require removing the door trim or panel; keep track of screws and fasteners
• Replace only with the exact part to ensure proper fit and safe operation

Fix washer door lock errors with this harness cover. Protects wiring from wear and disconnection, ensuring reliable door latching. Simple DIY fix.

Replacement screw for washer door hinge assembly. Secures the hinge to the cabinet frame. Order if your original screw is stripped, missing, or damaged.

Replace your washer door hinge assembly to restore smooth opening and proper alignment. Install when the door sags, won't close, or pivot feels loose. Confirm fit with your model number.